Themenbereich / Tradeshows

Sortiere PresseMitteilungen nach: Titel (A\D) Datum (A\D)

Seiten sind aktuell sortiert nach: Datum (erst neue PresseMitteilungen)

Reaming: Modular design and ease of hand-ling

The DIHART Reamax® TS tooling system satisfies the widest variety of demands that users expect in terms of quality and cost efficiency when reaming. The system saves on tooling costs, because of its modular structure and its easily exchangeable reaming heads allow it to be used for a wide variety of components, and its surprisingly good performance is demonstrated, for example, in an extremely long tool life. What is also appreciated at Hermesmeyer & Greweling is the concentricity integrated in the adjustable DIHART DAH® Zero toolholder. "We have been working with the drillin ...


"Milling with Quatron indexable inserts"

With the KOMET® Quatron hi.feed milling cutters, the KOMET GROUP is replicating the success of its proven KOMET KUB Quatron® drills in a new range of milling cutters. For roughing operations, this tool variant enables machinists to use the quadratic indexable inserts for both drilling and plunge milling. The most striking feature of these universal tools is the fouredged Quatron indexable insert. For years it has been the compelling solution for drilling operations, remarkable not only for the number of its cutting edges, but above all for its rapid removal of high chip volumes - prop ...


Drilling from 3 millimetres diameter from a single source

In addition to the comprehensive range of indexable insert drills, the KOMET GROUP is adding the KOMET® KUB DrillmaxTM solid carbide highperformance drill for small diameters to its standard catalogue range. KOMET® indexable insert drills are used for bore diameters of 12 millimetres or more. Until now, solid carbide drills have been created on request and for smaller bore diameters as a special solution, as part of complete component machining. By adapting cutting geometries, cutting materials and coatings, these tools have met the most diverse, applicationspecific demands. This know ...


New: ZUWA Impeller Pump with pneumatic drive

The pump manufacturer ZUWA will be presenting at the Automechanika in Frankfurt the combination of a ZUWA Impeller Pump with a pneumatic motor. The new pump is designed to be used at body shops and gas stations where the available compressed air can be utilized. With a weight of only 1,7 kg the pump is extremely light and can be used easily almost anywhere. The extremely durable impeller is suitable for a wide variety of fluids, including Diesel, oil and antifreeze. The pump is dry self priming and requires no prefilling prior to use. It operates pulsation free and also transports sol ...


Framegrabber video capture with reliable high-bandwidth

The constant drive for greater analysis resolution and higher system throughput results in the design of vision systems with multiple video inputs, each delivering hundreds, and even thousands, of Megabytes per second (MB/s) of pixel data. These video data rates challenge acquisition hardware and software to deliver reliable image capture on a PC-based system with a heavy application workload. A study was conducted on the effectiveness of the Matrox Radient frame grabber to perform reliable high-bandwidth video capture and alleviate other computational resources. Performance dependenc ...


QuinLogic Quality Execution System is online at China"s Shougang group

Shoudu Iron and Steel Group Company (Shougang) from P.R. China has implemented the QuinLogic Quality Execution systems for two sites. QuinLogic completed the project only three months after receiving the initial purchase order, covering the entire process from casting to galvanizing. Shougang now uses the QES for a 24/7 quality assurance of its production. Shougang equipped two casters (two strands each) and a hot strip mill in QianAn works and a cold mill, a continuous annealing line and two hot dip galvanizing lines at ShunYi works with QuinLogic software. With the QES software it is poss ...


KUKA Systems tecdays 2010 - Automation technologies from Augsburg

Augsburg, 16th July 2010 (mmm) - The Augsburg automation specialist and system integrator, KUKA Systems GmbH, provided information on the practical applications of innovative joining technologies at its in-house trade fair, "KUKA tecdays 2010" ( from 14th to 16th July. Roughly 200 experts and specialists from home and abroad, from industry and science, were made aware of the practical potential of automation technology and discussed the expert presentations. Using the example of an almost 7,500m² large automated system for the flexible production of goods wagons ...


SECUDATA®: logistics plus counterfeit protection

On the basis of the worldwide smallest and legally binding micro colour-codes SECUTAG®, 3S Simons Security Systems GmbH has developed SECUDATA®: an industry solution for the continuous security of the entire flow of goods and material. 3S will present this solution to the trade visitors at FachPack/LogIntern 2010. SECUDATA® combines the logistic advantages of different traceability solutions (data matrix, RFID, etc.) with the counterfeit protection of micro colour-codes. Both systems are conjointly applied either directly onto the product, its primary or secondary packaging or onto labels or s ...


Easy handling

Milling shoulders and grooves, making circular drilled holes on a helix path, and face and peripheral milling are typical operations that occur frequently when machining components. The KOMET GROUP has been designing and manufacturing applicationoriented milling cutters for a long time - especially for complete machining solutions. The new JEL® PCD face milling and screwin cutters have emerged from the numerous tailormade and applicationspecific special solutions as the standard milling cutter range for handling the wide spectrum of machining operations on lightweight construction materials. ...


Two-component high-pressure (airless) spraying 98:2 just one container saves on purging agent, prevents loss of material and protects the environment

HOFMANN, the market leader for road marking technology located in Rellingen, Germany, introduced high-pressure (airless) spraying of two-component sprayable plastics in a mixing proportion of 98:2 already in 2005. "This new 98:2 technology has become so proven and established in the industry that only this is demanded," says Torsten Pape, Head of Sales and Marketing at HOFMANN. The fact that this technology only requires one main-material container is just one of the reasons for the success of this new application that can be used in the distance-dependent as well as for the non dis ...



Bischofshofen, Austria. Micro-waterjet cutting technology is the shooting star of the miniaturised components industry. As a cold-cutting process it can cut filigrees and highly functional workpieces from a wide range of materials, where use of alternative cutting processes would result in distortion or melting. This includes ceramics, glass, plastics, non-ferrous metals, electronic components or composites, which are primarily machined to create extremely small parts for use in the mechanical engineering, electronics, automotive, chemical, jewellery, watch making and food industries as well a ...


Advanced HOFMANN marking length control system MALCON3 makes road marking easier and more flexible

The advanced system permits application speeds of up to 25 km/h and impresses with its great flexibility. The operator can choose between manual, semi-automatic, or fully automatic marking. "The marking length control system MALCON3 can be deployed internationally as well because it carries out any country-specific marking type fully automatically with up to three parallel running lines," says Torsten Pape, Head of Sales and Marketing at HOFMANN. Even line-space markings with variable beginnings and endings as well as continuous lines are possible. The MALCON3 system can also simul ...


Sizing and Sorting Fruits and Vegetables

It is estimated that more than 30 per cent of fruits and vegetables grown for North American consumers are discarded before they reach grocery store shelves because of "cosmetic imperfections". An apple is too small, a pear is the wrong color or a cucumber is misshapen. Imperfect produce that does manage to reach supermarkets remains unsold for the most part and ultimately ends up in landfill sites. In this era of skyrocketing food costs and global shortages it is in everyone's best interests?growers, packers, distributors, retailers, and consumers?to reduce this waste. ...


Schmid wins Intersolar Award for Laser Transfer Printer

The LTP Laser Transfer Printer 1500 from Schmid was awarded the international technology prize "Intersolar AWARD" in the category "PV Production Technology" at the Intersolar Europe exhibition in Munich. The prize was presented to Schmid along with two other companies competing in the same category, in an official ceremony. It was the innovative concept of the LTP, the contactfree metallisation of solar cells, which impressed the three independent juries comprising experts from the fields of research, science, industry and the trade press. The second product entered by Sch ...


New 2-component cold plastic SPOTFLEX® application system boasts high marking speed and modular build as well as user friendliness

The innovations are particularly noticeable in the high marking speed. An agglomerate line distance of 2 cm and one-row nozzle arrangement achieves up to 4.0 km/h; this corresponds to roughly 55 lines per second. "The high application speed at constant good quality is a real advantage of the new system. In addition to double lines, it is now possible to carry out line combinations of continuous and broken lines in one pass," explains Torsten Pape, Head of Sales and Marketing at HOFMANN. Moreover, the new 2-component cold plastic SPOTFLEX® application system boasts a modular spray b ...


Meet SGS at the Technical Conference on Wind Turbine Rotor Blades 2010 in Essen, Germany

From June 15-16, 2010, SGS exhibits at the Technical Conference on Wind Turbine Rotor Blades 2010 in Essen, Germany, which is organized by the Haus der Technik (House of Technique). SGS will present its wind energy services throughout the conference in the exhibition area. This event is dedicated solely to the topic of rotor blades and aims to widen the attendees´ knowledge of construction, production, fatigue and approval of rotor blades on the bases of rotor aerodynamics and the consequent static and dynamic stresses and strains. This event offers a good opportunity for SGS Renewable Energ ...


Meet SGS at the 2nd Oil & Gas Maintenance Technology North America Conference in New Orleans, USA

SGS presents a paper at the 2nd Oil & Gas Maintenance Technology North America Conference to be held from August 31 to September 2, 2010 in New Orleans, USA. The presentation entitled A Systematic Approach to Enhance Inspection-Maintenance Communication and Performance, will be given by Dr. Paul F. Schubert on September 1, 2010. The services offered by SGS will be presented throughout the exhibition at booth number 210. Dr. Paul F. Schubert is an independent Asset Integrity Management expert with 26 years of experience in the petrochemical and natural gas industry. He is the inventor of 1 ...


INTERGEO East 2010 Focus on geoinformation systems – Runder Tisch GIS e. V. is co-operation partner at INTERGEO East

Runder Tisch GIS e. V. is seeking to use INTERGEO East as an international forum for making new contacts, and it could not have chosen a better location, with major companies such as Trimble, Leica and Topcon among those attending the 6th event. “This year, Istanbul is not just the European Capital of Culture, but is also forging links between growth markets in the geo industry in Europe and Asia,” explains Prof. Karl-Friedrich Thöne, President of the German Association of Surveying – Society for Geodesy, Geoinformation and Land Management (DVW). He adds: “The trade fair and conference bring t ...


INTERGEO 2010: Cloud of volcanic ash puts geo experts in the spotlight

Over the past few days, people have become more aware of the INTERGEO motto – “Knowledge and action for planet Earth”. And INTERGEO manages to make the link between theory and practice. On Monday, for example, when the DLR (German Aerospace Centre) took off on its successful measurement flight, the scientists on board had fitted LIDAR (light detection and ranging) technology. An instrument of this kind, which emits laser beams and receives light signals for remote measurement of atmospheric parameters, will be one of the items on display at INTERGEO. It offers significant benefits for environm ...


SGS Exhibits at the 2010 ASME Trade Show in Pasadena, Texas

The Sixth Annual ASME Plant Engineering, Inspection and Maintenance Trade Show, to be held on April 22, 2010, at the Pasadena Convention Center in Pasadena, Texas is an appropriate occasion for SGS, to present its wide portfolio of services for the oil, gas and petrochemical industry.SGS Industrial Services will be exhibiting at booth number 304. Furthermore, at 2.45 p.m. in Room C, Dr. Paul F. Schubert, Asset Integrity Management (AIM) expert, will be giving an informative speech on behalf of SGS Industrial Services on the Critical Role of Inspection in Capital Projects. The presen ...


Page 134 from 137:  « ..  133 134 135  136  137 

All members: 9 441
Register today: 0
Register yesterday: 0
Members online: 0
Guests online: 109

Don't have an account yet? You can create one. As registered user you have some advantages like theme manager, comments configuration and post comments with your name.