Tradeshows

Themenbereich / Tradeshows


Sortiere PresseMitteilungen nach: Titel (A\D) Datum (A\D)

Seiten sind aktuell sortiert nach: Datum (erst neue PresseMitteilungen)

Energy efficiency is always in mind at BvL

The need to take action to protect the climate is a scientific fact and one of the most important issues of our time. On the terms of its Climate Protection Act, Germany aims to reduce emissions by at least 55 percent by 2030. In 2019, greenhouse gas emissions did fall year-on-year by 6.3 percent in Germany, according to figures from the German Federal Ministry for the Environment, Nature Conservation and Nuclear Safety. While this decline has also been made possible by corresponding activities in the manufacturing sector, maintaining and improving this trend is advisable and indeed essential. ...

25.05.2020

Not just constructive advantages

Modern, innovative mechanical engineering is characterized by decreasing external dimensions with constant or increasing overall performance. This development is not at least prescribed by the drive technology and here the required fasteners should not be underestimated. With the metal bellows coupling series KPS, the company Jakob Antriebstechnik from Kleinwallstadt was able to take this development into account and gained further advantages by constructive modifications. The known strengths of the metal bellows like compensation of the shaft misalignment high torsional rigidity low moment of ...

20.05.2020

?Successful open-heart surgery?: Pyraser Landbrauerei invests in a KHS glass bottle filler

Like the KHS Group, Pyraser Landbrauerei from the Franconia region of Germany looks back on a turbulent company history ? one that began at practically the same time as KHS?. The success story of the Dortmund specialist for filling and packaging systems started in 1868. Just two years later Pyraser launched its first country beers to the local market. About 150 years on, the two traditional companies are now writing history together, with the Landbrauerei investing in an efficient, automated glass filler from KHS. Seven days from ingress to production start was the clear instruction from Pyras ...

18.05.2020

BearingStar 90 from Thielenhaus

A high-performance machine for the finest processing of inner and outer rings of one and two rowed ball bearings, roller bearings and wave-like special types has been developed by Thielenhaus Microfinish: The BearingStar 90, which has been designed both for quantity production as well as flexible production in small and medium scale production, is a further development of KM 90, a longstanding proven anti-friction bearing processing solution from the market-leading manufacturer. All of the new technologies from direct drive are available for the new oscillation unit through to double oscillati ...

08.05.2020

Perfect combination of productivity and variation

On the path to Industry 4.0 Thielenhaus Microfinish has developed a trendsetting innovation for flat surface finishing: The MicroStar iQ is the first self-regulating flat-finishing machine based on the proven and flexible platform MicroStar. Until now no reducing processes were possible with parameters such as flatness. The 8 station machine for the combination processing doesn?t just ensure 100% compliance of all drawing dimensions for highly precise workpieces, but also the consolidation of the process stream. It generates significant cost savings. Oscillation sensors control the sensors and ...

08.05.2020

Innovative machine solution for run production

Based on the high-precision Sphero machine tool, Thielenhaus Microfinish has developed a highly efficient two-step solution which performs the entire fine-finishing process for spherical workpieces in short cycle times. The new SpheroStar is based upon the MicroStar and NanoStar platforms and like these two it is equipped with an indexing table. The SpheroStar has two tool spindle slides that can automatically rotate to 90 degrees so that the optimal machining position for the chosen process is set up automatically or by the push of a button, thus enabling the production of flat surfaces as we ...

08.05.2020

Photonics Systems Group strengthens its sales presence in the area of laser trimming

The Photonics Systems Group, a market leader in building laser equipment in the field of micro-materials processing, is expanding its sales activities in the area of laser trimming. For the North and South American markets, the corporate group comprising the companies InnoLas Solutions, LS Laser Systems, and EPP Electronic Production Partners will be working with Carlos Melendez from Melert Sales LLC as an exclusive distribution partner. The sales partnership is built on a strong foundation: Melendez looks back on 40 years of expertise in the electronics and semiconductor manufacturing market, ...

07.05.2020

Efficient Energy among the Red Herring Top 100 Europe Winners in 2020

Red Herring Top 100 Europe enlists outstanding entrepreneurs and promising companies. It selects the award winners from approximately 1,200 privately financed companies each year in the European Region. Since 1996, Red Herring has monitored these up-and-comers. Red Herring?s Top 100 list has become a mark of distinction for identifying promising new companies and entrepreneurs. Red Herring?s editors were among the first to recognize that companies such as Alibaba, Facebook, Google, SalesForce.com, Skype, SuperCell, Spotify, Twitter, and YouTube would change the way we live and work. Thousands ...

07.05.2020

Digital twin: KHS lowers fault-related costs with virtual machine commissioning

In the future the digital twin will become a key component of industrial production. KHS already uses models to virtually map the machine and conveyor system commissioning process. With the help of smart, digital technologies KHS is networking and automating production processes step by step so that machines, products and complete lines can efficiently communicate and work with one another. ?In particular what''s known as the digital twin enables procedures to be transferred to a virtual environment by tracking and imaging all phases in a machine?s life cycle. All production processe ...

05.05.2020

Small dimensions at high power - Safety coupling SKY

With the type SKY, JAKOB Antriebstechnik offers a safety coupling for indirect drives for overload limitation or collision protection, which meets the most modern requirements. It offers high release torques of up to 9000 Nm with a very compact design. The cone clamping bushing makes it easy to install. Large shaft or bore diameters, a high possible bearing load and excellent concentricity round off the concept. By using high-strength tempered steel with surface hardening or plasma coating of the relevant functional surfaces, particularly high disengagement torques could be realized. On reques ...

05.05.2020

The ICA automatic double-clipper in its fourth generation

The automatic clipper from Poly-clip System features the legendary iris separator for short, symmetrical sausage shoulders. That results in more slices per sausage, thus a bigger yield. In this class the ICA is the specialist for air-free slack filling of moulded products with overspreading up to 300 mm in proven Poly-clip quality. Ham products that are cooked in a square form using the cook-in principle can be securely clipped. Benefit from the tried and tested double-clipper for large sausages and moulded products. The ICA can process full muscle slicing stock in both plastic and fibrous cas ...

30.04.2020

Food Safety with Clip Closure Packaging

Better safe than sorry You make products (sausage, ham, minced meat, mozzarella cheese, herbal butter) on which the consumer imposes the highest of demands: taste, consistency, visual appeal ? everything has to be of optimum quality. This is why we at Poly-clip System help to put you in a position to supply the consumer with perfect products ? as a result of numerous controls, reliable and patented procedures which we have developed ourselves, as well as first-class materials. You can rely on us, the food safety and Halal compliance of our sausage clips. Yes, we are talking about aluminium cli ...

29.04.2020

The new FaceMill-Diamond: Process-reliable face milling with a long tool life

MAPAL customers rely on the FaceMill-Diamond PCD face milling cutter for face milling work at high volumes, on unstable parts and in the HPC (high performance cutting) sector. With its solid steel tool body and the permanently brazed PCD cutting edges, it achieves top feed rates and material removal rates that are second to none. Following comprehensive further development, MAPAL has increased the productivity of the PCD face milling system once again. ?Particularly in the area of high performance cutting, the number one customer requirement is the achievable material removal rate alongside th ...

28.04.2020

Something for everyone

Elastomer couplings are pluggable, backlash-free and flexible shaft couplings. The connection and compensation element consists of a plastic spider with involute teeth and a high Shore hardness. This elastic coupling spider is electrically insulating and has good oscillating damping behavior. It is inserted form-fitting and slightly preloaded into two claw-shaped hubs with high precision. The company Jakob Antriebstechnik based in Kleinwallstadt has various elastomer coupling variants in its product range, which can be put together as desired by means of a modular system. Custom-made products ...

27.04.2020

KHS promotes closed plastics loop with sustainable systems and solutions

The debate on plastic is presenting the beverage and food industries with a number of big challenges. The KHS Group is clear that the increased use of recycled PET provides a significant partial solution to this problem. The Dortmund systems supplier is thus focusing on sustainable products and services which help to close the recycling loop. According to business magazine Forbes, around 140 PET bottles per head are circulated in Europe each year, with this figure more than twice that in the USA at 290. Despite all the criticism the plastic container is actually growing in popularity, with the ...

23.04.2020

Again number one in the condensing units category: BITZER wins the HVACR trust award

The winners of the 2020 HVACR trust award have been chosen: just as in the first determination of the award in 2017, BITZER took first place in the condensing units category. The survey, which was carried out by cci Dialog GmbH from Karlsruhe, Germany, as part of this year''s HVACR trust award, delivered a clear result for BITZER: the refrigeration and air-conditioning technology specialist?s condensing units enjoy complete customer confidence and were thus able to secure first place in the category of the same name. BITZER condensing units already won first place in the 2017 HVACR t ...

23.04.2020

Innovative combination machining solution

The compact, high-precision tool machine Sphero, designed for machining workpieces with spherical forms, has been further developed by Thielenhaus Microfinish into a combination solution capable of handling the entire superfinishing process in just one clamping operation. The world leader has designed an innovative machine that can machine spherical workpieces with the highest demands, in terms of fine dimensional accuracy and surface quality, into finished components. The workpiece unit is mounted vertically and easily accessible for fast changeover. Thanks to the integrated tool changer with ...

23.04.2020

How to process powders efficiently

Ballrechten-Dottingen.Many pharmaceutical products are manufactured on the basis of powders, or are finished with them. Whether gels, creams or suspensions, coatings on tablets or in the manufacture of granulates. Powder and powder mixtures of all kinds are used here. The most important thing for the processors: Not only the quality has to be right, the results have to be reliably reproducible as well and has to be subordinated to the often minutely coordinated requirements of the process chain. The strengths of the ystral technology are used here. For manufacturing companies from the pharmace ...

22.04.2020

Stiff and flexible

It has proven itself on the market for decades and is a tried and tested standard series of metal bellows couplings: The metal bellows coupling KM from JAKOB Antriebstechnik. Like all metal bellows couplings, it is stiff in the direction of rotation, but flexible in the axial, angular and radial directions. Despite the similarities, however, metal bellows couplings sometimes differ greatly from each other. The technical differences are, for example, in the choice of the bellows or the connection of bellows and hub or bellows and shaft. JAKOB uses only thin-walled, multi-layered bellows made of ...

20.04.2020

Metal detector for plastics machinery - It has to be simple

Plastics processors know how important the utilization and uptime of expensive equipment such as injection moulding machines, extruders and blow moulding machines is for their business. Avoiding unscheduled downtimes caused, for example, by metal contaminants in the granulate is an absolute must. Therefore, metal detectors have become an important component in production lines of the plastics industry. The white paper "Two important factors when buying a metal detector for plastics processing machines" from Sesotec is about answering two questions that are often not given enough atte ...

16.04.2020


Page 1 from 123:  1 2  3  4  5  .. » 123





All members: 9 438
Register today: 0
Register yesterday: 0
Members online: 0
Guests online: 90


Don't have an account yet? You can create one. As registered user you have some advantages like theme manager, comments configuration and post comments with your name.