Metal bellows coupling KM

Reliable and inexpensive

(PresseBox) - It has proven itself on the market for decades as a reliable and inexpensive standard series of metal bellows couplings: the KM metal bellows coupling from JAKOB Antriebstechnik. Like all metal bellows couplings, it is rotationally rigid, but axial, angular and radial flexible. Despite the similarities, metal bellows couplings sometimes differ greatly from one another. The technical differences lie, for example, in the choice of bellows or the type of connection between bellows and hub or bellows and shaft. JAKOB only uses thin-walled, multi-layer bellows made from certified stainless steel sheets. This causes a high torsional spring stiffness. This ensures high positioning and concentricity accuracy even under difficult conditions, which guarantees absolutely backlash-free torque transmission between the input and output shaft. The multi-layer bellows design also ensures the ability to absorb large shaft displacements with nevertheless small restoring forces. This means a plus in terms of reliability, operational safety and service life.

The clamping hub of the KM is equipped with the innovative easy-clamp system, which allows it to be pushed on easily with sufficient clearance. The preload force required for torque transmission is ensured by a single, radially accessible screw per hub. This simple and reliable connection allows uncomplicated installation with just a few movements, even in cramped conditions. In order to achieve the lowest possible moment of inertia, the hubs are made of high-strength aluminum.

The bellows and hub are connected using the backlash-free flanged press-fit process. In contrast to glued joints, this joining method has unlimited fatigue strength under critical operating conditions (-40?C to +200?C, chemicals, etc.) and can safely introduce the transmission torque of each bellows layer into the hub.

Metal bellows couplings of the KM series are available with nominal torques from 0.4 to 1300Nm.

www.iakobantriebstechnik.de

Weitere Infos zu dieser Pressemeldung:
Unternehmensinformation / Kurzprofil:
Bereitgestellt von Benutzer: PresseBox
Datum: 05.09.2023 - 05:51 Uhr
Sprache: Deutsch
News-ID 690429
Anzahl Zeichen: 0

contact information:
Contact person: Jan Möller
Town:

Kleinwallstadt

Phone: +49 (6022) 2208-55

Kategorie:

Family

Diese Pressemitteilung wurde bisher 197 mal aufgerufen.


Die Pressemitteilung mit dem Titel:
"Metal bellows coupling KM"
steht unter der journalistisch-redaktionellen Verantwortung von

Jakob-Gruppe (Nachricht senden)

Beachten Sie bitte die weiteren Informationen zum Haftungsauschluß (gemäß TMG - TeleMedianGesetz) und dem Datenschutz (gemäß der DSGVO).

Metal bellows coupling KPS ...

Despite constant or increasing overall performance, modern and innovative mechanical engineering is characterized by decreasing external dimensions. This development can also be observed in the area of drive technology. The necessary connecting eleme ...

Coupling with flange ...

With the compact metal bellows coupling KGE, a tailor-made solution was developed for all gearboxes with a drive flange (DIN-EN-ISO 9409-1). This system unit impresses above all with its particularly short design with maximum utilization of the rigid ...

Reliable and cost-effective safety coupling ...

The SKW safety coupling ensures reliable overload and collision protection. It comes with a low-cost keyway connection and an integrated deep groove ball bearing for high bearing forces. Made of tempered steel, it can be used in temperature ranges fr ...

Alle Meldungen von Jakob-Gruppe