MAIJA milling discs in automation and with heated components
Using the MAIJA milling discs in automation and with highly heated components
(PresseBox) - The Maija milling discs can be used in automated areas, e.g. with a robot, in addition to the classic use on the manual angle milling cutter. For this purpose, MAIJA-Frästechnik GmbH offers planning and manufacturing according to customer requirements. The range extends from a simple adapter plate for integration into existing systems, to complete robot cells. In addition to simple tasks such as creating a chamfer or preparing a weld seam, fixtures for leveling weld seams over a longer distance can also be realized, for example. For this purpose, the "MAIJA roller milling carriage" can be combined with a robot which, guided on rails for example, can travel the full length of the component and evenly level the weld seam.
A special field of application for MAIJA milling discs is work on highly heated components. To demonstrate its use, a rail was heated so that it had a temperature of 430?C during machining. As an example, welds were leveled during the demonstration, but it is just as possible to open welds to correct any welding defects that may be present, prepare the weld to be metallically bright, and weld again. To carry out this work with a grinding/roughing wheel, the component would first have to be cooled down and, if necessary, then heated up again. With the MAIJA milling discs, this work can be carried out directly while the part is still hot, thus saving a great deal of time. Due to the location-independent use of the milling discs, this is possible wherever it is needed, without having to transport the component to be machined.
Maija-Frästechnik GmbH, founded in 2012, develops, produces and sells high-quality milling tools made of hard metal. The company owns the patent for milling discs, which was registered in 2000 by the later company founder.
Today it supplies the metalworking industry worldwide in a wide variety of sectors, including ship and yacht construction, container construction, commercial vehicle construction, rail vehicle construction and foundries.
The milling discs were awarded with the German prize for resource efficiency in 2015 ?? the Federal Ministry of Economics and Technology honored Maija-Frästechnik GmbH for the efficient use of limited resources in 2015.
Ministry and experts were convinced about the recyclability of the milling chips, which ?? in contrast to abrasive dust ?? can be reused without major effort.
Unternehmensinformation / Kurzprofil:
Maija-Frästechnik GmbH, founded in 2012, develops, produces and sells high-quality milling tools made of hard metal. The company owns the patent for milling discs, which was registered in 2000 by the later company founder.
Today it supplies the metalworking industry worldwide in a wide variety of sectors, including ship and yacht construction, container construction, commercial vehicle construction, rail vehicle construction and foundries.
The milling discs were awarded with the German prize for resource efficiency in 2015??the Federal Ministry of Economics and Technology honored Maija-Frästechnik GmbH for the efficient use of limited resources in 2015.
Ministry and experts were convinced about the recyclability of the milling chips, which??in contrast to abrasive dust??can be reused without major effort.
Datum: 15.02.2023 - 08:30 Uhr
Sprache: Deutsch
News-ID 677243
Anzahl Zeichen: 0
contact information:
Contact person: Meiko Haertel
Town:
Ennepetal
Phone: +49 (0)2333 869 77 05
Kategorie:
Family
Diese Pressemitteilung wurde bisher 199 mal aufgerufen.
Die Pressemitteilung mit dem Titel:
"MAIJA milling discs in automation and with heated components"
steht unter der journalistisch-redaktionellen Verantwortung von
Maija Frästechnik GmbH (Nachricht senden)
Beachten Sie bitte die weiteren Informationen zum Haftungsauschluß (gemäß TMG - TeleMedianGesetz) und dem Datenschutz (gemäß der DSGVO).
