DÜRR NDT Introduces Flat Panel Detector for X-ray Inspection of Elongated Structures
(firmenpresse) - 10 x 24 cm is one of the most commonly used formats for radiographic films in industrial radiography and Dhose lines.
The DRC 1024 NDT flat panel detector was designed from the ground up for industrial use, unlike square detectors which often originate from the medical field. A major disadvantage of square detectors is that typically less than a half of the active area is covered by the test object while the rest of the surface remains unprotected in the X-ray beam path during the entire exposure time. This results in overexposure and reduced detector life expectancy. To counter this, the uncovered surface usually requires shielding with steel or lead plates. The special design of the DRC 1024 NDT eliminates this complexity.
For mobile applications, the DRC 1024 NDT offers wireless data transmission as well as the possibility to use the device in battery mode. The carry handle ensures secure handling, but is also detachable to allow the detector to be inserted into hard-to-reach areas such as inside a pipe. Metric threaded holes in the rugged aluminum housing enable the panel to be mounted to any conceivable support system, such as a tripod or a manipulator in a cabinet.
The DRC 1024 NDT flat panel detector is suitable for both X-ray and gamma sources and is available in two scintillator options which should be chosen based on the penetrated wall thickness and the defect size to be detected. Available scintillator resolutions are Plus (SRb=130
Themen in dieser Pressemitteilung:
ndt
nondestructive-testing
radiographic-testing
materials-testing
x
ray
radiography
inspection
flat-panel-detector
Unternehmensinformation / Kurzprofil:
DÜRR NDT is a German manufacturer of radiographic testing (RT) systems for nondestructive testing (NDT), such as Computed Radiography (CR) scanners, flat panel detectors (DDAs), X-ray inspection software, automatic X-ray film processor, ,,green" X-ray chemicals.
Datum: 04.02.2021 - 07:34 Uhr
Sprache: Deutsch
News-ID 1564402
Anzahl Zeichen: 1999
contact information:
Contact person:
Town:
Phone:
Kategorie:
Manufacturing & Production
Typ of Press Release: Product
type of sending: send
Date of sending: 04.02.2021
Anmerkungen:
Diese Pressemitteilung wurde bisher 697 mal aufgerufen.
Die Pressemitteilung mit dem Titel:
"DÜRR NDT Introduces Flat Panel Detector for X-ray Inspection of Elongated Structures
"
steht unter der journalistisch-redaktionellen Verantwortung von
DÜRR NDT GmbH & Co. KG (Nachricht senden)
Beachten Sie bitte die weiteren Informationen zum Haftungsauschluß (gemäß TMG - TeleMedianGesetz) und dem Datenschutz (gemäß der DSGVO).
