Manufacturing & Production

Themenbereich / Manufacturing & Production


Sortiere PresseMitteilungen nach: Titel (A\D) Datum (A\D)

Seiten sind aktuell sortiert nach: Datum (erst neue PresseMitteilungen)

No hotter than 220 degrees Celsius!

Frenzelitred temperature limits for exhaust pipes are not exceeded, thereby preventing any media that escapes, such as diesel fuel, oil or hydraulic fluids from igniting on hot surfaces in the event of leakage. The globally binding SOLAS220 (International Convention for the Safety of Life at Sea) regulation has been in force for the thermal insulation of engines on large container and cargo ships as well as cruise liners since 2014. The convention states that engine room surfaces must not exceed 220 degrees Celsius to reduce the risk of any escaping liquids from igniting. Many diesel-driven en ...

24.11.2020

Space Series 2020

. The following topics have been discussed: Acoustics in Space by Bryce Garner, ESI Launch vehicle lift-off environment predictions using combined Ray Tracing by Mejdi Abderrazak, ESI Comparison of Measured DFAT by Wes Mayne III, MSI Cockpit, Cabin & Seat Design?? to meet costs, safety & comfort targets by Christian Marca, Human-centric Logistics, Launch Prep, Payload by Eric Kam, ESI Mid-frequency VA by Ricardo Alvarez, Fast Modal Extraction ? Large Model Computational Challenges by Willem Van Hal, A general SEA framework based on Finite Element modeling of the subsystems by Luca Alim ...

24.11.2020

USU and Cloud TechGurus Partner in US Market to Offer Knowledge Management Solutions

Unymira, a division of Aspera Technologies Inc. and part of the USU Group, announced a joint partnership agreement with Cloud Tech Gurus (CTG), a Technology Matchmaker in North America. For real customer success, clients must engage on the channels their customers prefer and deliver a consistent, high quality service. With extensive knowledge and experience in the omnichannel environment, the partnership between Unymira and Cloud Tech Gurus offer clients the opportunity to benefit from Unymira?s decades of experience in knowledge management for customer and IT service. ?Partnerships are a key ...

23.11.2020

Multi CAD data for MCAD and ECAD from a single data source makes digital twins a reality

CADENAS now offers component manufacturers valuable support in implementing their digitization strategy using the popular eCATALOGsolutions platform. With a digital product catalog, component data can be managed centrally and enriched with information for electrical planning in addition to data for mechanical engineering. Digital product information for an electrical engineer?s designs can be instantly generated in native formats for common CAE systems such as Zuken e3.series, EPLAN, NX Electrical Routing, Siemens Automation Designer, autoCAD Electrical, ECLASS ADVANCED and WSCAD. For a maximu ...

23.11.2020

Infront broadens trading offer in the UK

Infront ASA (INFRNT) today announced plans to expand its trading solution, initially for launch in the UK. With the integration of trading technology developed by the newly acquired NBTrader Solutions Ltd, Infront will offer full support for the total order life-cycle management. Infront has established a strong foothold in the UK, with a growing number of wealth managers and brokers using the Infront Professional Terminal, Execution Management System (EMS) and Retail Service Provider (RSP) platform. With the planned expansion of its trading solution, Infront will further support the UK market ...

23.11.2020

Connect with STEGO?s new IIoT Platform

STEGO CONNECT is the latest contribution to the Industry 4.0 technology. The new Software-as-a-Service provides user-friendly access to network and control sensors and actuators based on the IO-Link protocol. Data storage and software functionality are centrally organised in the STEGO CONNECT cloud. Freely configurable dashboards, alerts and workflows give users full control of their digitalisation projects. At the end of 2020, (scheduled launch date: 24 November 2020) STEGO is launching its new IIoT platform: STEGO CONNECT. The cloud service is a springboard into Industry 4.0 for small- and m ...

19.11.2020

Aspera Wins $1.3 Million Contract with American Banking Leader

Aspera, a leading provider of solutions and services for Software Asset Management (SAM) and part of the USU Group, today announced a $1.3M contract with a leading banking institution (The ?Customer?). The three-year agreement is for Aspera SmartTrack license management technology, Oracle optimization solutions, and related services. A seasoned and experienced SAM team selected Aspera as the best of breed solution for license management. A key decision point for The Customer was the ability to integrate effectively with a variety of data sources. ?This project started with an established SAM t ...

19.11.2020

Virtual weclapp sales partner day with more than 100 participants from four countries

weclapp SE, a subsidiary of 3U HOLDING AG (ISIN DE0005167902), held its annual Partner Day for its sales partners for the second time on 12 November 2020. weclapp also used the opportunity to introduce two new executives: Johannes Mehrer, PhD, as Head of Research and Development, and Sebastian Jung, the Head of Partner Management. With well over 100 participants from almost 90 companies, the virtual event reached IT service providers from Germany, Austria, Italy, and Switzerland. The partner companies successfully use the cloud-based ERP platform weclapp themselves in their own operations; the ...

19.11.2020

Configurator for DoorBird IP intercoms

The new DoorBird configurator allows architects and installers to design and purchase customized IP intercoms online. The high-quality video door stations made of stainless steel can be designed with individual dimensions and various call buttons and modules, such as keypad or house number plate. A selection of more than 50 RAL colors and surface coatings is available. With each configuration step, a 3D image of the DoorBird door station appears together with price and delivery time. Thanks to the augmented reality function, the intercom is visualized instantly at its installation location. Ma ...

18.11.2020

New cooperation: ETIM Deutschland&CADENAS will jointly provide BIM data for ETIM MC

ETIM Deutschland and CADENAS have agreed in a cooperation contract on the joint central provision of neutral BIM objects based on the EC classes of the free classification standard ETIM and the extension by the so-called ETIM Modeling Classes (MC). ETIM is a neutral standard for the electronic exchange of product data and presents data in a manufacturer-independent, media-neutral manner and in several languages of equal value. In a first step, already available Modeling Classes are implemented as MC templates based on CADENAS technology. In a second step, missing MCs will be identified, worked ...

18.11.2020

Charging to Success: be.ENERGISED Hits 5 Million Charges!

Our be.ENERGISED cloud software platform has just powered its five millionth EV charging session in Europe! Counting back to the launch of the platform, which handles operation, monitoring, and billing for eMobility charging processes, this big number works out on average to one charge every six seconds. hasrmany and the whole of Europe, ensuring easy, convenient access to eMobility. He sees the charging infrastructure and a seamless experience for eDrivers as the decisive factor in achieving this. Over 5 million charge sessions since 2008 On average, a new charging session powered by the be.E ...

18.11.2020

Unique Insights for Advertising on Amazon With New Tool?Sellics Benchmarker? ? Free Early Access Registration Started

Sellics, leading advertising software solution for brands and agencies on Amazon, has developed the "Sellics Benchmarker", a unique tool that allows advertisers on Amazon to compare their advertising performances with their competition. A data pool, consisting of 29 product categories, three of the largest Amazon marketplaces and an advertising sales volume of over $2.5 billion, delivers the most comprehensive and accurate benchmarks for key performance indicators (KPIs) of Amazon advertising campaigns to date. These benchmarks tailored to the specific industry sector and marketplace ...

18.11.2020

First 3D-Printed House in Germany Realized with Support from Allplan

Germany?s first 3D-printed single-family home is being built in Beckum. It was planned by the office MENSE-KORTE ingenieure +architekten using the BIM software Allplan. The 3D printing pioneers see enormous potential in the new technology. The project is being realized by the HOUS3DRUCK building owners'' association, which also includes Waldemar Korte from MENSE-KORTE ingenieure +architekten. The architects see a whole range of advantages in the machine production method: "3D printing offers a high degree of design freedom, which could only be realized with a high financial outl ...

18.11.2020

ASPINA enters small satellite market for components

ASPINA pioneers new business development by entering key component market for small satellites and supports private businesses targeted in communication services and earth observation, etc. that are expected to grow rapidly. ASPINA (Shinano Kenshi Co., Ltd., with headquarters in Ueda City, Nagano Prefecture, Japan hereinafter ASPINA) is working on the development of "Reaction Wheels," a key component used for attitude control for small satellites that utilize the technology of precision motor related products and is expected to grow globally in "small size satellites led by t ...

18.11.2020

IDSA Accelerates Gaia-X with the Data Spaces Concept

It takes more than a cloud to turn data into a data economy. Companies have to be able to share their data in ways that they control for themselves. Gaia-X is delivering the technical and organizational infrastructure that enables that secure, trustworthy data-sharing and monitors compliance. The International Data Spaces (IDS) standard, which enables open, transparent and self-determined data exchange, is a central element of the Gaia-X architecture. An infrastructure for data exchange Gaia-X debuted at the Digital Summit 2019. IDSA has been very active in Gaia-X from day one and is a foundin ...

18.11.2020

Space Series 2020 - Account for load and dynamic requirements such as noise, vibration, harshness during the design stage.

. The following topics have been discussed: Human-Centric Assembly and Manufacturing By Eric Kam Spaceframe and Launch Vehicle Manufacturing By Mark Vrolijk, ESI Digital Engineering for High-strength Specialty Materials and Products Space Stamping By Craig Dolan, Luxfer Superform Flex and Stretch ? A STAMP Story By Scott Pryer, Pryer Aerospace Casting for SPACE By Badarinath Kalkunte, ESI Coupling Manufacturing Effects to Performance Studies By Vijay Tunga, ESI Design and optimize the additive manufacturing process to achieve first time right print By Pierre Adrien-Pires, ESI Recordings of our ...

17.11.2020

HARVEY® integrated into the modern Buddhist concept of the Altar of Zhousan

In the new ultra-modern Buddhist center in the Guanyin Dharma Empire, in the scenic Baishan area of Zhujiajian, in the city of Zhoushan, a "spiritual landmark" was created as a home for all believers of Guanyin according to a Buddhist concept. The architectural style integrates the characteristics of traditional Chinese pavilions and modern high-rise technology as well as contemporary Buddhist art. Leading the trend of contemporary Buddhism, the center offers space for large-scale religious activities, group seminars, high-profile conferences, themed exhibitions and festival performa ...

16.11.2020

GBTEC and bQuind: Strategic Partners for BPM Excellence in the Benelux States

On November 16th, Niels Doeleman, Managing Director at bQuind, and GBTEC Group founder and CEO Gregor Greinke signed the strategic partnership of their companies. bQuind, based in Naarden, Netherlands, is a specialist for IT consulting in the field of process digitalization and will play a central role in the further market development of GBTEC''s digitalization suite BIC Platform. The customer and partner network of bQuind covers all Benelux countries, so that the digitalization specialist will act as a consultant for the distribution, implementation, and support of BIC Platform, es ...

16.11.2020

USU Software AG announces figures for third quarter and first nine months of 2020

. Sales growth of 8.1% in Q3 2020 High share of the SaaS business in new contracts Adjusted EBIT of over EUR 1 million as planned Sales for first nine months rise by 16.1% Adjusted nine-month EBIT up 80.2% New record for orders on hand Sales and earnings planning confirmed USU Software AG (ISIN DE000A0BVU28) and its subsidiaries (hereinafter also referred to as the ?USU Group? or ?USU?) improved their consolidated sales (IFRS) by 8.1% year-on-year to EURg figure of the prior year. At the same time, USU increased consulting revenues by an above-average 20.6% year-over-year to EUR As a result of ...

16.11.2020

Cryptovision presents ePasslet Suite on Infineon SECORA ID X at SDW Virtual

At this year?s SDW Virtual, cryptovision presents its ePasslet Suite V3 on SECORA? ID X, the new Java Card? platform from Infineon. With the help of ePasslet Suite, users of SECORA? ID X will be able to put numerous eID functions into practice easily and flexibly. A presentation will be displayed in the SDW Virtual ?Technology Showcase? section. Cryptovision?s ePasslet Suite on SECORA? ID X provides applets for various eID document applications, including electronic passports, eIDAS-compliant ID and signature cards, international electronic driver?s licenses, electronic health cards (eHIC), cu ...

16.11.2020


Page 1 from 257:  1 2  3  4  5  .. » 257





All members: 9 438
Register today: 0
Register yesterday: 0
Members online: 0
Guests online: 67


Don't have an account yet? You can create one. As registered user you have some advantages like theme manager, comments configuration and post comments with your name.