businesspress24.com - Cables for parking brake and clutch actuation
 

Cables for parking brake and clutch actuation

ID: 1560915

Two rather unassuming, but important wear parts

(PresseBox) - When you think about typical wear parts in the vehicle, it is not usually the cables that come to mind first. But both the cables for the parking brake and the cable for clutch actuation can corrode or wear during a vehicle''s service life. They have to be replaced in this case. We are also prepared for this repair case and offer cables for parking brakes and clutch actuation in our Jakoparts range specialised in Asian vehicles.

Clutch cable

The clutch cables are subjected to constant high tensile loads when operated, making them a typical wear part. To prevent excessive wear or, in the worst case, a break in the cable, they must be checked and replaced if necessary. Professional installation is important here, as incorrectly installed or incorrectly adjusted clutch cables present a problem and can cause increased wear on the clutch. A typical example are rotating clutches, i.e. they cause the clutch lining to burn on the clutch disc or the flywheel to overheat.

Parking brake cable

The task of the parking brake is to protect the vehicle against rolling away or to act as an auxiliary brake. The parking brake function is based on the continuous actuation of the rear brake, this is carried out either mechanically by hand or foot actuation, or electrically. It works by permanently locking the vehicle?s wheels. If the effect of the hand brake reduces, a worn hand brake cable is a likely cause. It is possible that the wheels may no longer be blocked correctly after the hand brake is actuated. This is often caused by a corroded or worn hand brake cable. As a classic wear part, it can be replaced easily and at a relatively low cost. However, if the hand brake cable turns out to be intact, it may also be necessary to reset it depending on the condition of the brake pads or brake shoes. This would restore the full function of the hand brake. A well-adjusted hand brake should be able to be tightened in four stages.

Clutch cable





Article number: J230*

Parking brake cable

Article number: J392*

Please note that the picture is only for web! For printable images please contact Ms. Kipphan:

anika.kipphan(at)herthundbuss.com

Weitere Infos zu dieser Pressemeldung:

Themen in dieser Pressemitteilung:


Unternehmensinformation / Kurzprofil:

Please note that the picture is only for web! For printable images please contact Ms. Kipphan:anika.kipphan(at)herthundbuss.com



Leseranfragen:



PresseKontakt / Agentur:



drucken  als PDF  an Freund senden  Cover your pump!
Valmet Automotive published the first Sustainability Report
Bereitgestellt von Benutzer: PresseBox
Datum: 22.09.2020 - 03:00 Uhr
Sprache: Deutsch
News-ID 1560915
Anzahl Zeichen: 2348

contact information:
Contact person:
Town:

Heusenstamm


Phone:

Kategorie:

Pharmaceuticals & Biotech


Typ of Press Release:
type of sending:
Date of sending:
Anmerkungen:


Diese Pressemitteilung wurde bisher 322 mal aufgerufen.


Die Pressemitteilung mit dem Titel:
"Cables for parking brake and clutch actuation
"
steht unter der journalistisch-redaktionellen Verantwortung von

Herth+Buss Fahrzeugteile GmbH&Co. KG - English press compartment (Nachricht senden)

Beachten Sie bitte die weiteren Informationen zum Haftungsauschluß (gemäß TMG - TeleMedianGesetz) und dem Datenschutz (gemäß der DSGVO).


Alle Meldungen von Herth+Buss Fahrzeugteile GmbH&Co. KG - English press compartment



 

Who is online

All members: 10 563
Register today: 2
Register yesterday: 2
Members online: 0
Guests online: 85


Don't have an account yet? You can create one. As registered user you have some advantages like theme manager, comments configuration and post comments with your name.