Weidmüller at the "electronica 2018" - Hall C2, Booth 334
(PresseBox) - Weidm
With the OMNIMATEcess, and thus a high level of EMC safety in the power sector. The male connector has 3-mm touch-safe protection on both sides, as well as on both the male and female header.
Devices in the power electronics sector and in particular in the area of drive technology usually require the device outputs to have a touch-safe design. This requirement is particularly important for motor connections or DC intermediate circuits. The inverted variants are designed to be touch-safe on both sides even when unplugged, and this applies to both the male and the female header. Due to the touch-safe design on both sides, no additional measures need to be implemented at the connections for the DC intermediate circuits or motors.
In order to ensure the highest possible level of EMC safety, the EMC shielding must be securely contacted, in particular in the case of servo drives or frequency converters.
The OMNIMATEe is made from special EMC spring-contact strip. This ensures that the shield connection to the metal housing is long-lasting and vibration-proof with extensive surface contact, thereby guaranteeing optimal interference dissipation. This is ensured by the positioning of the shielding braid at the end of the wire with extensive surface contact. The shielding and the metal housing are connected automatically via the pluggable spring strip as a direct result of the connection process and without the need for operator intervention. There is no need for any complex equipment to attach the shielding.
Due to the comprehensive touch-safe protection with 3-mm protection on both sides and on both the male and female header, the OMNIMATE
The OMNIMATE
The OMNIMATE& release lever.
OMNIMATE
With four service packages, the OMNIMATE"application-oriented product recommendation" Internet-based selection aid AppGuide, and the well-established 72-hour sample service. With this sample service, device designers won''t lose any time; Weidm
Weidm
Additional information: www.weidmueller.com; www.weidmueller.de/AppGuide
www.weidmueller.de/omnimate;www.weidmueller.com/omnimate
Themen in dieser Pressemitteilung:
Unternehmensinformation / Kurzprofil:
Datum: 27.09.2018 - 08:50 Uhr
Sprache: Deutsch
News-ID 1541770
Anzahl Zeichen: 4818
contact information:
Contact person:
Town:
Detmold
Phone:
Kategorie:
Research & Development
Typ of Press Release:
type of sending:
Date of sending:
Anmerkungen:
Diese Pressemitteilung wurde bisher 562 mal aufgerufen.
Die Pressemitteilung mit dem Titel:
"Weidmüller at the "electronica 2018" - Hall C2, Booth 334
"
steht unter der journalistisch-redaktionellen Verantwortung von
Weidmüller (Nachricht senden)
Beachten Sie bitte die weiteren Informationen zum Haftungsauschluß (gemäß TMG - TeleMedianGesetz) und dem Datenschutz (gemäß der DSGVO).
