For the first time at Schweißen & Schneiden 2017 Other field of application
The ISA-BRAZE® solders are suitable for gap soldering, braze soldering and surfacing by soldering. For example, they can be used to combine components with each other for energy technology, electrical engineering and electronics where a good current flow must be ensured when transitioning from one part to another. In the tool industry, these solders can be used to attach blades or other functional elements made of hard metal to carrier materials. These solders can also be used to reliably produce highly stressed components from the aforementioned materials for engine technology, heating and cooling technology, industrial fittings and pipeline systems or for vehicle construction.
High-temperature solder ISA-BRAZE®
ISA-BRAZE® is an alternative in joining and connection technology. It is significantly "lower spatter" compared to standard wires with arc applications and is ideal for flux-free applications using inert gas. It can also be used as a functional material for coatings since it is suitable for gap soldering, braze soldering and surfacing by soldering. In the three available versions of ISA-BRAZE®970, ISA-BRAZE®970 Si and ISA-BRAZE®980, the digits refer to the solidus temperature in °C, which identifies the temperature, below which the alloy is completely in the solid phase.
Advantages of the vacuum procedure
Due to the production in the vacuum furnace, the ISA-BRAZE® alloys have an extremely high degree of purity of ≤ 0.15w%. This forms the basis for the best physical and chemical properties, since gas and non-metallic inclusions are minimal, for example. The alloys are thus extremely corrosion and oxidation resistant. The thermal conductivity, the electrical conductivity, the specific electric resistance, the thermal stress and the temperature coefficient are positively influenced by the high degree of purity of the alloys. Very homogeneous and clean soldering joints or coatings are created by the vacuum procedure.
(firmenpresse) - For the first time at Schweißen & Schneiden 2017
Other field of application
The ISA-BRAZE® solders are suitable for gap soldering, braze soldering and surfacing by soldering. For example, they can be used to combine components with each other for energy technology, electrical engineering and electronics where a good current flow must be ensured when transitioning from one part to another. In the tool industry, these solders can be used to attach blades or other functional elements made of hard metal to carrier materials. These solders can also be used to reliably produce highly stressed components from the aforementioned materials for engine technology, heating and cooling technology, industrial fittings and pipeline systems or for vehicle construction.
High-temperature solder ISA-BRAZE®
ISA-BRAZE® is an alternative in joining and connection technology. It is significantly "lower spatter" compared to standard wires with arc applications and is ideal for flux-free applications using inert gas. It can also be used as a functional material for coatings since it is suitable for gap soldering, braze soldering and surfacing by soldering. In the three available versions of ISA-BRAZE®970, ISA-BRAZE®970 Si and ISA-BRAZE®980, the digits refer to the solidus temperature in °C, which identifies the temperature, below which the alloy is completely in the solid phase.
Advantages of the vacuum procedure
Due to the production in the vacuum furnace, the ISA-BRAZE® alloys have an extremely high degree of purity of ≤ 0.15w%. This forms the basis for the best physical and chemical properties, since gas and non-metallic inclusions are minimal, for example. The alloys are thus extremely corrosion and oxidation resistant. The thermal conductivity, the electrical conductivity, the specific electric resistance, the thermal stress and the temperature coefficient are positively influenced by the high degree of purity of the alloys. Very homogeneous and clean soldering joints or coatings are created by the vacuum procedure.
Delivery forms
ISA-BRAZE® high-temperature solders are delivered in the form of wires and rods in the dimensional range from 0.5 to 3.0 mm Ø and are also available in the form of rings, punched parts and bent parts, flat wires and strips. Customer-specific designs are also available.
First presentation of ISA-BRAZE® at Schweißen & Schneiden 2017
Over 1,000 exhibitors from 40 countries will be at the international specialized trade fair Schweißen & Schneiden 2017 in Düsseldorf (host: Trade Fair Essen). Isabellenhütte Heusler will also be represented this year for the first time as an exhibitor in order to present the new ISA-BRAZE® alloys to the specialized audience.
Please visit us:
Isabellenhütte Heusler GmbH & Co. KG is exhibitor at the Schweißen & Schneiden 2017 in Düsseldorf
Hall 12, Booth 12A95
Themen in dieser Pressemitteilung:
Unternehmensinformation / Kurzprofil:
About Isabellenhütte Heusler
Isabellenhütte emerged from a copper foundry that was first documented in 1482 and was renamed Isabelle Kupferhütte in 1728. The business has been run as a family company since 1827 and is now in its eighth generation. The company employs some 850 people and is internationally active in the three fields of precision measurement, precision and power resistors, and precision alloys. Its strengths include a high vertical range of manufacture that ranges from alloy smelting and shaping to the construction of components. Production activities comply with international standards and customer specifications. Major clients come from the automotive and other vehicle manufacturing industries, the energy industry, and the electrical and electronics industry.
www.isabellenhuette.de
Isabellenhütte Heusler GmbH & Co. KG
Eibacher Weg 3 – 5
D-35683 Dillenburg
Uwe Schwarzbach
Business Development Manager Applications
Phone: +49 (0)2771 / 934-9252
uwe.schwarzbach(at)isabellenhuette.de
Wassenberg Public Relations für
Industrie & Technologie GmbH
Rollnerstr. 43
D-90408 Nürnberg
Michaela Wassenberg
Phone: +49 (0)911 / 598 398-0
Fax: +49 (0)911 / 598 398-18
m.wassenberg(at)wassenberg-pr.de
Datum: 22.09.2017 - 04:18 Uhr
Sprache: Deutsch
News-ID 1521706
Anzahl Zeichen: 4971
contact information:
Contact person:
Town:
Phone:
Kategorie:
Manufacturing & Production
Typ of Press Release: Produktinformation
type of sending: Veröffentlichung
Date of sending:
Anmerkungen:
Diese Pressemitteilung wurde bisher 313 mal aufgerufen.
Die Pressemitteilung mit dem Titel:
"For the first time at Schweißen & Schneiden 2017 Other field of application
"
steht unter der journalistisch-redaktionellen Verantwortung von
Isabellenhütte Heusler GmbH & Co. KG (Nachricht senden)
Beachten Sie bitte die weiteren Informationen zum Haftungsauschluß (gemäß TMG - TeleMedianGesetz) und dem Datenschutz (gemäß der DSGVO).
