Pixargus: Drillhole Inspection makes automatic installation of door seals safe and reliable
100-percent inline inspection instead of random checks and manual measurements
(firmenpresse) - At "K 2013", Pixargus will introduce the new "Drillhole Inspection" module for its ProfilControl Surface (PCS) systems, which now in addition to inspecting the surfaces of rubber or caoutchouc profiles can also check the presence and position of drillholes in door seals for vehicles.
In the manufacture of sealing profiles for vehicle doors, the Drillhole Inspection module checks as early as during the production process whether all venting and drill holes have been made and whether they are all in the right position. The system triggers an alarm as soon as it detects that a drill hole is missing, that it does not have the correct diameter or shape, or that the spacing between the holes is not as it should be.
Especially for automated assembling processes, this type of inspection is paramount as it ensures that the door seals can be installed quickly and reliably. In the past, checking the drillhole positions was a very complicated procedure prone to errors because the high production speeds make it impossible to take a manual measurement of each spacing. Consequently, manual checks were only made on a random basis. Now, the new module makes it possible for the first time to check the entire profile in an inline process.
With the Drillhole Inspection module, Pixargus is complementing its line of inspection systems for sealing profiles used in automotive construction. It belongs to the family of Pixargus ProfilControl Surface (PCS) systems, which inspect the surface condition of profiles in an inline procedure.
As soon as the module detects any out-of-spec condition, it displays the defect and the defect class, and sends out a signal. The signal can be used to mark out-of-spec sections of the profiles or control downstream cutting and sorting equipment. This relieves the human inspector from the monotonous task of visual checks and painstaking sorting of the profiles into good and bad.
The direct feedback of ProfilControl 6 data into the process makes it possible to correct the production process without delay, ensuring that defects do not continue along the profile.
Pixargus at "K 2013" in Düsseldorf (October 16 -23, 2013):
hall 11 / stand E14
Themen in dieser Pressemitteilung:
Unternehmensinformation / Kurzprofil:
About Pixargus
Pixargus develops and manufactures systems for optical inline measurement and inspection of plastic and rubber profiles. Established in 1999 as a spin-off of the Institute of Plastics Processing (Institut für Kunststoffverarbeitung IKV) of the Technical University RWTH of Aachen/Germany, Pixargus has specialized in optical quality control of extruded products made of plastics and rubber.
Pixargus systems inspect sealing profiles - for example, for the automotive industry - and tubing, catheters, cables or window seals as well as raw material (compounds) made of thermoplastic elastomers (TPE) and rubber. Additionally, Pixargus offers systems for the inspection of - textured, woven or non-woven - web material.
Worldwide almost all major manufacturers of automotive rubber and TPE profiles use Pixargus systems for surface inspection and profile measurements. The underlying image processing technology is also the basis for the recent foundation of the company GoalControl GmbH and for the soccer goal-line technology of the same name, which proved successful during the 2013 FIFA Confederations Cup.
Based in Würselen near Aachen/Germany, Pixargus GmbH is active worldwide through its US branch and various international technical agencies.
VIP-Kommunikation
Regina Reinhardt
Suesterfeldstraße 83
52072 Aachen / Germany
reinhardt(at)vip-kommunikation.de
+49.241.89468-24
http://www.vip-kommunikation.de
Datum: 16.09.2013 - 07:00 Uhr
Sprache: Deutsch
News-ID 1263654
Anzahl Zeichen: 0
contact information:
Contact person: Dirk Broichhausen
Town:
Würselen / Germany
Phone: +49.2405.47908-0
Kategorie:
Electronics & Semiconductors
Anmerkungen:
Diese Pressemitteilung wurde bisher 169 mal aufgerufen.
Die Pressemitteilung mit dem Titel:
"Pixargus: Drillhole Inspection makes automatic installation of door seals safe and reliable
"
steht unter der journalistisch-redaktionellen Verantwortung von
Pixargus GmbH (Nachricht senden)
Beachten Sie bitte die weiteren Informationen zum Haftungsauschluß (gemäß TMG - TeleMedianGesetz) und dem Datenschutz (gemäß der DSGVO).
