Commercial & Investment Banking

Themenbereich / / Commercial & Investment Banking


Sortiere PresseMitteilungen nach: Titel (A\D) Datum (A\D)

Seiten sind aktuell sortiert nach: Datum (erst neue PresseMitteilungen)

MES HYDRA users share best practices

On June 6, 2018, delegates from North and Central America gathered to participate in MPDV NA Customer Day & Industrial IoT Forum 2018. The event was co-hosted by Panduit Corporation at its world headquarters in Tinley Park, IL USA and attended by MPDV customers from all over the region. Best practice sharing is a powerful method to gain new knowledge and to optimize production processes ? so did the users of MPDV?s Manufacturing Execution System (MES) HYDRA. They had come to network with other MES HYDRA users, exchange MES knowledge, and learn about the future roadmap of HYDRA, which is at ...

22.06.2018

FSK invites to the International Specialist Conference Foamed Plastics 2018

Innovations, lectures, contacts and trends - the Specialist Association Foamed Plastics and Polyurethanes offers the perfect platform at its annual industry event, the International Foamed Plastics Conference in Papenburg at the end of November. The Specialist Association Foamed Plastics and Polyurethanes (FSK) will be holding its annual International FSK Specialist Conference Foamed Plastics from 27 to 29 November. The 2018 venue for the FSK Specialist Conference will be the Forum Alte Werft in Papenburg and will offer participants everything they need to know about foamed plastics. The two-d ...

22.06.2018

Fraunhofer LBF at the Compounding World Expo 2018

Already today modern production systems can communicate with their surroundings and manage themselves. Industry 4.0 is on the rise and cyber-physical systems (CPS) are the essential components of this development. Intelligent sensors for monitoring and controlling production processes ensure that connected work processes can run reliably. Scientists at Fraunhofer LBF have used these technologies as part of the "ImProcess4.0" project and developed an intelligent sensor node-based monitoring and optimization system for production lines using twin-screw extruders. With this sensor syste ...

22.06.2018

Chemspec Europe 2018 opens its doors tomorrow in Cologne and presents the full range of fine and speciality chemicals

Chemspec Europe, the 33rd International Exhibition for Fine and Speciality Chemicals, will take place from 20?21 June 2018, at Koelnmesse in Cologne, Germany. On a net exhibition space of over 6,000 square metres, a total of 358 exhibitors from 27 countries will present a product portfolio that covers the full spectrum of fine and speciality chemicals for various applications. Furthermore, visitors can expect new intelligent networking opportunities with the Chemspec Europe Partnering Programme as well as a comprehensive conference programme. Chemspec Europe is Europe?s leading fine and specia ...

19.06.2018

M-Enabling Forum Europe alongside REHACARE 2018

M-Enabling Forum Europe will take place September 27, 2018. E.J.Krause & Associates (EJK) and G3ict (Global Initiative for Inclusive ICT, established with the support of the United Nations) organize this conference and showcase to promote accessible technologies and environments for senior citizens and persons with disabilities. M-Enabling Forum 2018 is held in the Congress Center of Messe Duesseldorf. Parallel REHACARE exhibition will be running on the fairground expecting about 40.000 professional visitors. M(obile)-Enabling Forum presents panel discussions about policy, regulations and ...

18.06.2018

Trends in ultra-precision optical surface engineering - Manufacturing methods and applications

Modern optical surfaces for high-end applications such as semiconductor lithography, laser, X-ray radiation, telescopes or space-based optical systems require utmost accuracy of surface form, waviness and roughness. At the same time, the large variety of complex surface forms demand for highly deterministic machining processes. Precision shape cutting technologies like diamond turning, as well particle beam-based technologies like ion beam, plasma and laser machining methods provide unique features for ultra-precision surface engineering on the atomic height scale. The application of these eme ...

15.06.2018

ProMinent at ACHEMA 2018: Hydraulic diaphragm metering pumps

At ACHEMA 2018 in Hall 8 at stand J94 ProMinent is showcasing its Hydraulic diaphragm pumps type Hydro. The tried-and-tested range of process pumps from ProMinent have moved things up a level in terms of performance and versatility. The Hydro/ 4 model now offers delivery capacity of 200 l/h at 40 bar as a single-head pump and is capable of delivery capacities of up to 400 l/h at 40 bar as a twin-head pump. With the types Hydro 2, Hydro 3 and Hydro 4, ProMinent offers an end-to-end product range with stroke lengths of 15 mm or 20 mm, covering outputs from 3 to 1,450 l/h at 100 to 7 bar. The app ...

14.06.2018

ProMinent at ACHEMA 2018: Orlita® Evolution range of process pumps

At this year''s ACHEMA in Frankfurt, June 11 to 15, 2018, ProMinent will present the extended product range of the Orlita This extends the potential applications of the pumps, while at the same time reducing costs ? particularly for applications with aggressive media. In addition to this, ProMinent added the rugged and precise EP1 and EP2 piston metering pumps to their line of hydraulic diaphragm metering pumps. All Evolution versions with stainless steel and plastic metering unit, as well as those with a piston dispensing head, have a modular structure. They can be flexibly designed ...

14.06.2018

ProMinent at ACHEMA 2018: Ozone system OZONFILT® OZVb

ProMinent is unveiling its turnkey, compact product range of ozone systems OZVb in Hall 8 on Stand J94 at ACHEMA 2018 in Frankfurt, Germany. Powerful ozone systems Ozonfilt OZVb are ideally suited to treating cooling and process water. The compact systems efficiently generate ozone from compressed air in an output range of up to 70 g/h and provide everything you need for safe, smooth operation. Ozone systems Ozonfilt OZVb are pressurised systems in which compressed air is fed into the ozone generator as the operating gas. The air is treated in the system using a pressure swing dryer and good o ...

13.06.2018

ProMinent at ACHEMA 2018: DULOMETER® DACb

At ACHEMA 2018, 11 until 15 June 2018, in Frankfurt, Germany, ProMinent will showcase the new device in hall 8 stand J94. Do you wish a simple controller for water analysis? One that is easy to operate and with which you can freely select between all common measured variables per channel? There is one! The new controller Dulcometer Dialog DACb. The basic version boasts two measuring and control channels and can also be fed by 24 V DC protective low voltage. The corresponding sensors can be connected to each channel using an mV or mA input. Customers can choose from up to 14 different measured ...

12.06.2018

ProMinent at ACHEMA 2018: Chlorine dioxide system Bello Zon® CDLb

ProMinent will be presenting its chlorine dioxide system Bellozon CDLb at ACHEMA 2018, 11-15 June 2018 in Frankfurt, Germany, on stand J94 in hall 8. The chlorine dioxide system CDLb uses the chlorite/acid process to generate a chlorine-free chlorine dioxide solution by reacting sodium chlorite solution with hydrochloric acid. The innovative reactor design guaranteeing economical, environmentally-friendly operation with minimal use of chemicals. In batch production a chlorine-free chlorine dioxide solution is generated from a sodium chlorite solution and hydrochloric acid. This is an extremely ...

12.06.2018

The third edition of the "3D Pioneers Challenge" comes to a successful end

Already for the third time the ?3D Pioneers Challenge" took place within the scope of the tradeshow for additive manufacturing Rapid.Tech + FabCon 3.D in Erfurt. The unique ?3D Pioneers Challenge" covers a range of verticals and is aimed at designers from all continents who are breaking new ground in the field of 3D printing. After the multistage jury panel 32 submissions made their way to become the lucky finalists being presented at the special exhibition on the tradeshow in Erfurt. The more than 60 sqm huge booth was an outstanding highlight in the fair hall and attracted visitor ...

12.06.2018

Dahua Chairman Spoke at China (Zhejiang) - Zimbabwe Business Forum

On June 11th local time, Mr. Fu Liquan, Chairman of Dahua Technology, participated in the China (Zhejiang) ? Zimbabwe Business Forum held in Harare, the capital city of Zimbabwe. Mr. Fu Liquan gave a speech at the forum on behalf of Dahua Technology. The forum, participated by political and business representatives on the Zimbabwean side, including President Emmerson Mnangagwa, and the Zhejiang delegation led by Secretary of Zhejiang Provincial Committee of the Communist Party of China, Che Jun, focused on exploring the business opportunities in Zimbabwe?s key economic fields. Mr. Che Jun said ...

12.06.2018

ProMinent at ACHEMA 2018: Controller AEGIS II

ProMinent is presenting its new controller Aegis II for cooling and boiler water treatment between 11 and 15 June 2018 on Stand J94 in hall 8 at ACHEMA in Frankfurt, Germany. The device regulates the bleeding and the metering of corrosion inhibitors and biocides. It reliably prevents corrosion, deposits and biological growth in evaporator cooling water circuits, and thus maintains the cleanliness of pipework and heat exchangers. With the new controller, all the measurement parameters required can be entered and the functions needed for trouble-free operation can be controlled. The controller A ...

12.06.2018

ProMinent at ACHEMA 2018: Motor-driven meteing pump Sigma X

Discover the metering pumps for digital fluid management: At ACHEMA 2018 between 11 and 15 June 2018 in Frankfurt, Germany, in hall 8 on stand J94. ProMinent?s new Sigma X range provides smart and flexible motor-driven metering pumps that set new benchmarks in terms of operating convenience, reliability and safety. Representing the systematic evolution of our Sigma product range, which has proved itself a million times over, the new Sigma X combines its durability and process reliability with an innovative and uniform operating concept coupled with comprehensive connectivity. Constituting an i ...

11.06.2018

ProMinent at ACHEMA 2018: Extended Connectivity

At this year?s ACHEMA, intelligent solutions for digital fluid management play the leading role at the ProMinent stand J94 in Hall 8. The core topic ?Extended Connectivity? covers numerous, further developed products and solutions. Optimised systems accommodate Process 4.0: they minimise the consumption of raw materials used, operating errors, and down times. At the same time, the customer service is improved through networking, transparency, and automation, and the timely delivery, maintenance, and repairs on site are ensured. The product innovations include the new diaphragm metering pumps g ...

11.06.2018

ProMinent at ACHEMA 2018: Solenoid diaphragm metering pump gamma/ XL

Gamma XL will be showcased at ACHEMA 2018 between 11 and 15 June 2018 in Frankfurt, Germany, hall 8 on stand J94. The Gamma XL extends the performance spectrum of ProMinent?s intelligent solenoid metering pump series gamma/ X. The Gamma XL is as smart, easy to use and has the same long service life as its smaller sister model. With a higher capacity range of 8 to 80 l/h at 25 to 2 bar, the gamma/ XL increases the versatility of the gamma/ X product range and opens numerous new fields of application. The new gamma/ XL is ?Ready for Industry 4.0?. Designed as a smart product, it can be connected ...

11.06.2018

JSC Russian Agriculture Bank Enables Acceptance of JCB Cards in Russia

Moscow and Tokyo, June 1, 2018 - (ACN Newswire) - JSC Russian Agriculture Bank ("RSHB") and JCB International Co., Ltd., the international operations subsidiary of JCB Co., Ltd., are pleased to announce the launch of JCB card acceptance on the RSHB ATM and POS terminal network. RSHB''s acquiring network includes 3,800 ATMs, 1,700 info-kiosk terminals and more than 10,500 POS terminals at merchants. Now JCB cardmembers will be able to withdraw cash and check their balance at RSHB ATMs. Irina Zhachkina, Deputy Chairman of the Board of JSC Russian Agriculture Bank noted: &quo ...

06.06.2018

JSC Russian Agriculture Bank Enables Acceptance of JCB Cards in Russia

Moscow and Tokyo, June 1, 2018 - (ACN Newswire) - JSC Russian Agriculture Bank ("RSHB") and JCB International Co., Ltd., the international operations subsidiary of JCB Co., Ltd., are pleased to announce the launch of JCB card acceptance on the RSHB ATM and POS terminal network. RSHB's acquiring network includes 3,800 ATMs, 1,700 info-kiosk terminals and more than 10,500 POS terminals at merchants. Now JCB cardmembers will be able to withdraw cash and check their balance at RSHB ATMs. Irina Zhachkina, Deputy Chairman of the Board of JSC Russian Agriculture Bank noted: "Th ...

06.06.2018

VI-grade presents Official Review of 2018 Users Conference

VI-grade, the leading provider of best-in-class products and services for bridging the gap between real-world testing and technical simulation, today announced the official review of the 2018 edition of its International Users Conference. 232 engineers, managers and simulation experts from 91 automotive, motorsports, motorcycle and rail companies, universities and research centers based in 15 countries throughout the world came together to discuss the latest trends in simulation. The aim was to compare notes with other users of VI-grade technology during the event that took place on May 8th-9t ...

05.06.2018


Page 1 from 1184:  1 2  3  4  5  .. » 1184





All members: 8 419
Register today: 0
Register yesterday: 4
Members online: 0
Guests online: 68


Don't have an account yet? You can create one. As registered user you have some advantages like theme manager, comments configuration and post comments with your name.