Pressemitteilungen zu dem Thema stress analysis


Unterkategorien

PresseMitteilungen zu dem Schlagwort stress analysis


Intergraph(R) webinar May 16th to demonstrate leakage prevention in pipe flange design using CAESAR II(R) and PV Elite(R)

HOUSTON, TX -- (Marketwired) -- 05/03/17 -- Intergraph will host a webinar on May 16, 2017 at 10:00 a.m. CDT that will demonstrate how to prevent leakage in pipe flanges that interconnect with equipment by using the design and analyses capabilities in CAESAR II and PV Elite for piping and vessels. The webinar will cover how to address the various problems that promote leakage and procedures to help reduce the likelihood they will occur. The webinar leader will be Ray Delaforce, senior support e ...


03.05.2017

Intergraph(R) webinar May 11th to demonstrate new capabilities in GT STRUDL(R) 2017 release

HOUSTON, TX -- (Marketwired) -- 05/02/17 -- Intergraph will host a webinar on May 11, 2017 at 10:00 a.m. CDT that will discuss the latest updates and enhancements in GT STRUDL 2017 including the new Canadian steel design code, steel table, and new earthquake load generator for seismic analysis. The new release also provides improvements in the selection and editing of objects to allow better display and viewing of loads and results and permit placement of parametric concrete cross sections, hel ...


02.05.2017

Intergraph(R) releases CADWorx(R) Structure 2017 R1 with advanced new 3D steel structure design capabilities

HOUSTON, TX -- (Marketwired) -- 04/24/17 -- Intergraph announces the release of CADWorx® Structure 2017 R1, a fit-for-purpose solution for designing steel structures and modeling industrial plant buildings, pipe racks, offshore topsides and other structures for process, power and manufacturing facilities. This release adds the option to run on the AutoCAD® or BricsCAD® platform and provides new advanced capabilities that allow designers and engineers to cite the weight and center of gravity of ...


24.04.2017

Intergraph(R) webinar April 26th to demonstrate CADWorx(R) Structure 2017 R1 new capabilities for structural designers and engineers

HOUSTON, TX -- (Marketwired) -- 04/14/17 -- Intergraph will host a webinar on April 26, 2017 at 10:00 a.m. CDT that will demonstrate CADWorx Structure 2017 R1 new capabilities that include selection filters, modeling techniques for gusset plates, openings in structural members, and exporting to structural analysis packages. The webinar will discuss modeling techniques for skid design and industrial platforms and the sharing of model information between design and analysis disciplines for more e ...


14.04.2017

Intergraph(R) webinar April 25th to demonstrate parallel engineering, drafting and scanning using CAESAR II(R)

HOUSTON, TX -- (Marketwired) -- 04/13/17 -- Intergraph will host a CAESAR II webinar on April 25, 2017 at 10:00 a.m. CDT that will discuss the advantages of parallel drafting, engineering and high-definition scanning (HDS) and the benefits this provides for project engineers and business development managers. The webinar will demonstrate the interoperability of CADWorx & Analysis Solutions and Leica Geosystems applications that allow for the seamless transfer of information among drafting, ...


13.04.2017

Intergraph(R) webinar April 18th to demonstrate new capabilities in CADWorx(R) Plant Professional 2017

HOUSTON, TX -- (Marketwired) -- 04/06/17 -- Intergraph will host a webinar on April 18, 2017 at 10:00 a.m. CDT that will demonstrate new capabilities in CADWorx 2017 R1. This new release includes the most complete DWG file-based range of tools for effective plant design and offers unparalleled flexibility and collaboration, including the option to run on the AutoCAD® or BricsCAD® platform. Regardless of the CAD platform, CADWorx continues to provide 100% functionality and the user interface is ...


06.04.2017

Intergraph(R) webinar March 23rd to demonstrate water hammer evaluation using CAESAR II(R)

HOUSTON, TX -- (Marketwired) -- 03/09/17 -- Intergraph will host a webinar on March 23, 2017 at 10:00 a.m. that will demonstrate how to use CAESAR II to predict a piping system''s response to sudden changes in flow that cause pressure fluctuations and unbalanced forces and can lead to failed supports, overloaded equipment and components. Predicting these loads by hand can be impractical or even impossible. The webinar will discuss how CAESAR II performs water hammer evaluation by gene ...


09.03.2017

Intergraph(R) webinar March 21st to demonstrate PV Elite(R) for pressure vessel design, fabrication and delivery

HOUSTON, TX -- (Marketwired) -- 03/07/17 -- Intergraph will host a webinar on Tuesday, March 21, 2017 at 10:00 a.m. and again at 8:00 p.m. CDT Houston (Tuesday at 4:00 p.m. CET Amsterdam and Wednesday at 12:00 p.m. AEDT Melbourne) that will demonstrate pressure vessel design, fabrication and delivery using Intergraph PV Elite to ensure a competitive and profitable project. The webinar will discuss preliminary design for the bidding stage; detail design after the job is approved; and fabrication ...


07.03.2017

Intergraph(R) CADWorx(R) webinar February 28th to demonstrate new Industry Foundation Classes export utility for bills of material projects

HOUSTON, TX -- (Marketwired) -- 02/17/17 -- Intergraph will host a webinar on February 28, 2017 at 10:00 a.m. CST that will demonstrate the new Industry Foundation Classes (IFC) export utility in CADWorx Design Review 2017 R1, a tool that simplifies creating required deliverables in building information management (BIM) projects. The webinar will discuss the IFC specification, a neutral, industry-standard file format that describes building and construction industry data, and how IFC data excha ...


17.02.2017

Intergraph(R) CAESAR II(R) webinar February 23rd to demonstrate how to prepare, present and review results of pipe stress analyses

HOUSTON, TX -- (Marketwired) -- 02/10/17 -- Intergraph will host a webinar on February 23, 2017 at 10:00 a.m. CST that will demonstrate how to prepare, present and review pipe stress analysis with CAESAR II, including those performed internally and through third parties. The webinar will discuss how to effectively address client requirements while maintaining productivity, including the various post-processing tools found in the CAESAR II Output Processor. Topics will include the new CAESAR II ...


10.02.2017

Intergraph(R) webinar February 21st to demonstrate new PV Elite(R) 2017 Autodesk(R) Inventor Plugin

HOUSTON, TX -- (Marketwired) -- 02/10/17 -- Intergraph will host a webinar on February 21, 2017 at 10:00 a.m. CST that will demonstrate the new PV Elite 2017 Plugin for Autodesk Inventor. The webinar will discuss the plugin''s geometries and its abilities to manage the vessel data associated with the model, including the use of iProperties. Other topics will include the software''s easy customization and detailed assembly representations. The webinar leader will be Luis Sanj ...


10.02.2017

Intergraph(R) webinar January 31st to discuss CADWorx(R) for streamlining and supporting Management of Change (MOC) in plant design

HOUSTON, TX -- (Marketwired) -- 01/20/17 -- Intergraph will host a webinar on January 31, 2017 at 10:00 a.m. CST that will discuss how to leverage CADWorx as a tool to streamline and support Management of Change (MOC) processes within the organization. The webinar will review how CADWorx can streamline MOC processes and help get revisions completed quickly and efficiently. The webinar will also cover ways CADWorx supports everything from process updates to specification corrections and layout m ...


20.01.2017

Intergraph CAESAR II(R) webinar January 26th to demonstrate how to select appropriate supports in piping design

HOUSTON, TX -- (Marketwired) -- 01/17/17 -- Intergraph is hosting a CAESAR II webinar on January 26, 2017 at 10:00 a.m. CST / 5:00 p.m. CET (Amsterdam) that will demonstrate how to select from the different types of pipe support components to ensure the best results when modeling piping systems. Proper selection can help prevent future problems such as shutdowns and repairs due to an inadequate support component. The webinar will cover a range of supports available in CAESAR II including spring ...


17.01.2017

Intergraph(R) CADWorx(R) & Analysis Solutions

HOUSTON, TX -- (Marketwired) -- 01/16/17 -- Intergraph will host a PV Elite webinar on January 24, 2017 at 10:00 a.m. CDT (Houston) / 5:00 p.m. CEST (Amsterdam) that will discuss updates in the API 579 pressure vessel code involving general corrosion, local metal loss and pitting. First in a series of three webinars, this webinar will include a short demonstration of new changes as implemented in PV Elite 2017. Webinars on June 27, and October 24, 2017 will cover parts 2 and 3 of the series on ...


16.01.2017

Intergraph(R) webinar November 30th to discuss CADWorx(R) benefits in food, dairy, pharmaceutical and semiconductor facility design

HOUSTON, TX -- (Marketwired) -- 11/28/16 -- Intergraph will host a webinar on November 30, 2016 at 10:00 a.m. CST that will demonstrate how using CADWorx in the design of facilities for the food, dairy, pharmaceutical and semiconductor industries can help bring facilities on line faster and reduce design costs while meeting regulatory requirements and ensuring operational safety and high quality products. The webinar will discuss how inefficient design practices eat away at the tight profit mar ...


28.11.2016

Intergraph(R) GT STRUDL(R) webinar November 15th to demonstrate new wind load analysis

HOUSTON, TX -- (Marketwired) -- 11/08/16 -- Intergraph will host a GT STRUDL webinar on November 15, 2016 at 10:00 a.m. CT that will demonstrate the new ASCE 7 wind load analysis capabilities, self-weight loading for finite elements, enhanced time-saving techniques, and other new tools for structural analysis and design. The webinar leader will be Joe Harrison, product manager for Civil/Structural/Analytical Applications at Intergraph CADWorx® & Analysis Solutions.For more information about ...


08.11.2016

Intergraph(R) webinar October 25th to discuss new features and updates in CADWorx(R) 2017 for plant design

HOUSTON, TX -- (Marketwired) -- 10/18/16 -- Intergraph will host a webinar on October 25, 2016 at 10:00 a.m. CDT that will provide a preview of new capabilities and enhancements offered in CADWorx 2017 to help plant engineers and designers execute project workflows more effectively. From enhancements in data management efficiency to visualization and including automatic isometric revision clouding, the benefits in CADWorx 2017 provide greater control of component types and connectivity, faster ...


18.10.2016

Intergraph Webinar October 13th to Demonstrate New CADWorx(R) Structure for Modeling Structures, Pipe Rakes and More

HOUSTON, TX -- (Marketwired) -- 10/08/16 -- Intergraph is hosting a webinar on October 13, 2016 at 10:00 a.m. CDT that will demonstrate CADWorx Structure, a new solution for building models of plant structures, pipe racks, offshore topsides and other installations with efficiency, speed and accuracy. CADWorx Structure includes the tools needed to easily and quickly create revenue-driven structural models and focuses specifically on the needs of end users involved in designing structures and rel ...


08.10.2016

Intergraph Webinar September 29th to Introduce New Online Training on CAESAR II(R), CADWorx(R), PV Elite(R)

HOUSTON, TX -- (Marketwired) -- 09/13/16 -- Intergraph is hosting a webinar on September 29, 2016 at 10:00 a.m. CDT that will provide an overview of new training courses on Intergraph CADWorx, CAESAR II and PV Elite from PipingDesignOnline.com. The courses, taught by leading product experts and offered at a fraction of the cost of conventional classroom training, will include PV Elite Modeling, covering vessel and exchanger design; CAESAR II Statics II, covering pipe stress analysis for static ...


13.09.2016

Intergraph Offering Group Discounts of $600 per Person for HxGN LOCAL CAU Houston 2016 Users Conference on September 19-20

HOUSTON, TX -- (Marketwired) -- 09/12/16 -- Intergraph is offering a registration discount of $600 per person when registering three or more for the Hexagon Global Network (HxGN) LOCAL CADWorx & Analysis University (CAU) Houston 2016 user conference on September 19-20, 2016 at the Sugar Land Hotel Town Square.HxGN LOCAL CAU Houston 2016 offers advanced plant design and engineering instruction from product experts for users of CAESAR II®, CADWorx®, PV Elite® and GT STRUDL®, allowing them to ...


12.09.2016

Intergraph(R) Hosting Live Demonstrations of Its New CADWorx(R) Structure Software on September 21st in Houston

HOUSTON, TX -- (Marketwired) -- 08/15/16 -- Intergraph will host a live hands-on demonstration of CADWorx Structure, the company''s new product for structural designers and engineers that will release this fall. This sneak peek demonstration will be during the educational conference on September 21, 2016 at the Sugar Land Marriott, with sessions at 10:00 - 11:30 a.m., 1:00 - 2:30 p.m., and 2:30 - 4:00 p.m.This new addition to the CADWorx family gives structural designers the same eas ...


15.08.2016

Intergraph(R) CAESAR II(R) Webinar July 21st to Discuss How to Shorten the Learning Curve

HOUSTON, TX -- (Marketwired) -- 07/13/16 -- Intergraph will host a CAESAR II webinar on July 21, 2016 at 10:00 a.m. CDT (Houston) / 5:00 p.m. CEST (Amsterdam) that will provide quick tips on solutions for the most common questions and issues from new CAESAR II users. The webinar will provide answers to some commonly encountered questions among those learning the software, including the reasoning behind each question, and show participants how to make CAESAR II perform the tasks at hand. The web ...


13.07.2016

Intergraph(R) GT STRUDL(R) to Offer September Training Courses on Static, Dynamic, Baseplate, and Steel Design and Analysis

HOUSTON, TX -- (Marketwired) -- 06/30/16 -- Intergraph will host a series of GT STRUDL training sessions during September at the company''s Norcross office near Atlanta, Georgia that will demonstrate how to use the software for basic static analysis, dynamic analysis, baseplate design and analysis, and steel design and analysis. The courses will include GT STRUDL Overview and Basic Static Analysis on September 12-14; GT STRUDL Steel Design on September 15-16; GT STRUDL Dynamic Analysi ...


30.06.2016

Intergraph(R) GT STRUDL(R) Webinar June 29th to Demonstrate Three Best Practices for Structural Analysis and Design Modeling

HOUSTON, TX -- (Marketwired) -- 06/17/16 -- Intergraph will host a webinar on June 29, 2016 at 10:00 a.m. CT that will demonstrate three key functions within GT STRUDL including how to check your inputs for any structural model, conduct accurate time history analysis, and leverage the software''s extensive library of super elements to save time during analysis and design. The webinar leader will be Poornachandrika, product manager for Structural Solutions at ImageGrafix Engineering Se ...


17.06.2016

Intergraph Opens Registrations for HxGN LOCAL CAU Houston 2016, Set for September 19-20

HOUSTON, TX -- (Marketwired) -- 06/15/16 -- Intergraph has opened the registration site for the Hexagon Global Network (HxGN) LOCAL CADWorx & Analysis University (CAU) Houston 2016 user conference, scheduled for September 19-20, 2016 at the Sugar Land Hotel Town Square. HxGN LOCAL CAU Houston 2016 offers advanced plant design and engineering instruction from recognized experts for users of CAESAR II®, CADWorx®, PV Elite® and GT STRUDL®, allowing them to expand their capabilities and learn a ...


15.06.2016

Intergraph(R) CAESAR II(R) Webinar May 24th to Discuss How to Address Model Accuracy Challenges During Pipe Stress Analysis

HOUSTON, TX -- (Marketwired) -- 05/19/16 -- Intergraph will host a CAESAR II webinar on May 24, 2016 at 10:00 a.m. CDT (Houston) / 5:00 p.m. CEST (Amsterdam) that will discuss how to identify and address potential accuracy issues in models that can occur during pipe stress analysis. The webinar will cover several common sources of unexpected inaccuracies and demonstrate the use of CAESAR II and FEATools™ to help improve upon some of these model accuracy issues. The webinar leader will be Jim Wi ...


19.05.2016

Intergraph(R) Webinar May 25th to Demonstrate Four Functions of GT STRUDL for Structural Analysis and Design Modeling

HOUSTON, TX -- (Marketwired) -- 05/17/16 -- Intergraph will host a webinar on May 25, 2016 at 10:00 a.m. CT that will demonstrate key functions within GT STRUDL including model mode shape analysis; unstable, disconnected visual detection; moving load application; and response spectrum, time history analysis plot review. The speaker will be Mitch Sklar, P.E., GT STRUDL business development expert at Intergraph CADWorx & Analysis Solutions.Intergraph''s GT STRUDL structural analysis ...


16.05.2016

Intergraph(R) Webinar May 19th to Demonstrate Project-Level Integration Between CADWorx(R) & Analysis Solutions and SmartPlant(R) Offerings

HOUSTON, TX -- (Marketwired) -- 05/10/16 -- Intergraph will host a webinar on May 19, 2016 at 10:00 a.m. CT that will demonstrate various levels of integration between CADWorx & Analysis Solutions and SmartPlant offerings, an integration that helps users share, re-use and leverage data that is created throughout their work processes. Intergraph solutions such as CADWorx, CAESAR II®, PV Elite® and GT STRUDL® automate the production of deliverables, reduce engineering and design time and impr ...


10.05.2016

Intergraph Offering Pre-Registration Discount of $500 for HxGN LOCAL Houston CAU 2016 on September 19-20

HOUSTON, TX -- (Marketwired) -- 05/02/16 -- Intergraph is offering attendees a pre-registration discount of $500 for the Hexagon Global Network (HxGN) LOCAL CADWorx & Analysis University (CAU) Houston 2016 user conference on September 19-20, 2016 at the Sugar Land Hotel Town Square. HxGN LOCAL CAU Houston 2016 will offer advanced plant design and engineering instruction from recognized experts for users of CAESAR II®, CADWorx®, PV Elite® and GT STRUDL®, allowing them to expand their capabil ...


02.05.2016

Intergraph(R) PV Elite(R) Webinar March 31st to Demonstrate Analysis Methods for Rectangular and Square Pressure Vessels

HOUSTON, TX -- (Marketwired) -- 03/23/16 -- Intergraph will host a PV Elite webinar on March 31, 2016 at 10:00 a.m. CDT (Houston) / 5:00 p.m. CEST (Amsterdam) that will demonstrate how to perform a complete pressure analysis of rectangular or square sectioned vessels in various configurations. Often used in the medical industry to maximize packing space, rectangular or square vessels, in contrast to cylindrical vessels, require different rules when analyzing pressure because a flat plate is the ...


23.03.2016

Intergraph(R) Launches CAUOnline(TM) Offering No-Cost Streaming Training Courses for CADWorx(R), CAESAR II(R), GT STRUDL(R), PV Elite(R), TANK(TM) and Visual Vessel Design(TM) Users

HOUSTON, TX -- (Marketwired) -- 03/11/16 -- Intergraph has announced the launch of CAUOnline, a no-cost training site that complements the company''s global live CADWorx & Analysis University (CAU) educational events. With CAUOnline, engineers and designers can choose from classes on CADWorx, CAESAR II, GT STRUDL, PV Elite, TANK and Visual Vessel Design (VVD) streamed to their desktops and mobile devices, offering users a digital way to have access to complete courses previously o ...


11.03.2016

Intergraph(R) GT STRUDL(R) Webinar February 23rd to Demonstrate How to Revamp Existing 3D Projects and Interface With Intergraph Smart 3D

HOUSTON, TX -- (Marketwired) -- 02/11/16 -- Intergraph will host a webinar on February 23, 2016 at 10:00 a.m. CT that will demonstrate how to use the capabilities in GT STRUDL 2016 to revamp existing 3D projects, including those from other products, and interface directly with Smart 3D models. The webinar will show how to maintain and overlay the latest analytical design onto the latest project model and feed data to other enterprise applications, with no reentry required, highlighting the new ...


11.02.2016

Intergraph(R) PV Elite(R) Webinar January 28th to Discuss Transferring Wind or Seismic Loads to Legs in Vessel Design

HOUSTON, TX -- (Marketwired) -- 01/19/16 -- Intergraph will host a webinar on January 28, 2016 at 10:00 a.m. CST that will discuss how PV Elite transfers wind or seismic loads to the legs in the analysis and design of vessels. Participants in the webinar will learn about the stress due to combined loads functionality PV Elite provides and how advanced analysis tools assign the longitudinal stresses for vessels supported on legs when vessels are subject to wind and earthquake loading. The webina ...


19.01.2016

Intergraph(R) Webinar November 17th to Cover CADWorx(R) 2016 New Capabilities and Enhancements

HOUSTON, TX -- (Marketwired) -- 11/11/15 -- Intergraph will host a webinar on November 17, 2015 at 10:00 a.m. CT that will cover new capabilities and enhancements in CADWorx 2016 for plant design including better control of material assignment at the specification level, enhanced management of complex pipe support assemblies, improved specification management across versions and increased flexibility in using Excel data for creating piping and component specifications. These and other enhanceme ...


11.11.2015

Intergraph(R) CADWorx(R) & Analysis University 2015 Express on October 29th in Calgary, Alberta to Provide CADWorx, CAESAR II(R) and PV Elite(R) Training

HOUSTON, TX -- (Marketwired) -- 10/20/15 -- Intergraph is hosting a CADWorx & Analysis University 2015 (CAU2015) Express training event in Calgary, Alberta, Canada on October 29, 2015 that will provide training sessions on Intergraph CADWorx, CAESAR II, PV Elite and GT STRUDL designed to help users streamline their organizations'' work processes and eliminate inefficiencies, presented by product experts who have decades of experience. Participants can expand their professional ski ...


20.10.2015

HxGN LIVE 2015 on November 18-20 in Hong Kong to Feature Intergraph(R) CADWorx(R) & Analysis University Sessions, China Update, Jiangxi Textile Presentation

HOUSTON, TX -- (Marketwired) -- 09/29/15 -- Hexagon Global Network LIVE 2015 (HxGN LIVE 2015) on November 18-20, 2015 in Hong Kong will include Intergraph CADWorx, CAESAR II®, and PV Elite® classes led by industry experts during the CADWorx & Analysis University (CAU) 2015 sessions, part of the Intergraph PP&M track. These include user success stories from the Williams Companies and Jiangxi Textile Design Institute, the winner in the CADWorx Drivers of Success user competition. Other se ...


29.09.2015

Intergraph(R) PP&M USA User Conference September 30th in Houston to Cover Updates in CAESAR II, PV Elite and GT STRUDL for Engineering Analysis and Modeling

HOUSTON, TX -- (Marketwired) -- 09/28/15 -- The Intergraph Process, Power & Marine USA User Conference (IUSA) on Wednesday, September 30, 2015 at the Houston Marriott Westchase in Houston, Texas, will feature technical product updates from Intergraph experts and breakout track sessions by leading industry professionals plus opportunities for attendees to network with peers and experts.The Analysis Track during IUSA will include sessions on CAESAR II, PV Elite and GT STRUDL. The 11:00 a.m. s ...


28.09.2015

Intergraph(R) CADWorx(R) Webinar September 29th to Demonstrate Model Data Search and Filtering Using New Plant Edge

HOUSTON, TX -- (Marketwired) -- 09/28/15 -- Intergraph is hosting a webinar on September 29, 2015 at 10:00 a.m. CT that will demonstrate the benefits of using the new Plant Edge solution to bring data from CADWorx models into a single grid view for filtering, searching, sorting and grouping. Developed by Edge Solid Solutions, Plant Edge provides powerful search and filtering capabilities that enable designers to quickly find errors in model data and make the required corrections or changes. The ...


28.09.2015

Intergraph(R) CADWorx & Analysis University Express in India During March to Include Sessions on Designing Plants and Offshore Facilities

HOUSTON, TX -- (Marketwired) -- 02/27/15 -- Intergraph is expanding its highly successful CADWorx® and Analysis University Express (CAU Express) educational events in India this year with three cities to include Mumbai on Monday, 23 March, 2015, at the Grand Hyatt Mumbai; Chennai on Wednesday, 25 March, 2015, at the Hyatt Regency Chennai and New Delhi on Friday, 27 March 2015, at Hyatt Regency Delhi.CAU Express is a global series of paid educational events. Each includes technical classes by In ...


27.02.2015

Intergraph(R) Releases PV Elite(R) 2015 With New Modeling Capabilities and Other Productivity Enhancements

HOUSTON, TX -- (Marketwired) -- 01/30/15 -- Intergraph announced today the release of PV Elite 2015, the most advanced version that now includes a new 3D PDF modeler plus CodeCalc improvements and code and calculation updates. A complete solution for vessel and heat exchanger design, analysis and evaluation, this latest release of Intergraph PV Elite also includes additional configuration options, improved analysis capabilities and many other productivity enhancements. For information about PV ...


30.01.2015

Intergraph(R) Webinar January 29th to Discuss PV Elite(R) 2015 New Capabilities and Other Enhancements

HOUSTON, TX -- (Marketwired) -- 01/26/15 -- Intergraph is hosting a PV Elite webinar on January 29, 2015 at 10:00 a.m. CT that will discuss the new capabilities in PV Elite 2015, including the new 3D PDF modeler, and improvements to CodeCalc, the output processor and many other enhancements. The webinar leader will be Scott Mayeux, director of development for Pressure Vessels and Exchanger Solutions at Intergraph. For 10 years Mayeux has also served as an ASME Code Committee member for the Sub ...


25.01.2015

Intergraph(R) CADWorx(R) Webinar December 11th to Demonstrate Configuring ISOGEN With Drawing Setup

HOUSTON, TX -- (Marketwired) -- 12/05/14 -- Intergraph is hosting a webinar on December 11, 2014 at 10:00 a.m. CT that will demonstrate configuring ISOGEN with drawing setup. ISOGEN, the industry-standard software that comes with CADWorx Plant Professional, provides for the automatic production of piping isometric drawings to help streamline and save time. The webinar will demonstrate how the drawing setup tool in I-Configure allows users to easily create and modify drawing templates and config ...


05.12.2014

Intergraph(R) CAESAR II(R) Webinar December 11th to Discuss Time-Saving Features for More Efficient Pipe Stress Modeling and Analysis

HOUSTON, TX -- (Marketwired) -- 12/05/14 -- Intergraph will host a CAESAR II webinar on December 11, 2014 at 2:00 p.m. CT that will focus on one of the numerous time-saving and helpful features built within CAESAR II for pipe stress modeling and analysis. The webinar will discuss the benefits the model generation feature provides for delivering the most efficient designs and improving productivity. The webinar leader will be Mandeep Singh, product manager for CAESAR II at Intergraph CADWorx &am ...


05.12.2014

Intergraph(R) CADWorx(R) Webinar November 20th on Enhanced Specification Editing and Catalog Development in CADWorx 2015

HOUSTON, TX -- (Marketwired) -- 11/13/14 -- Intergraph is hosting a webinar on November 20, 2014 at 10:00 a.m. CT that will discuss enhancements in the specification (spec) editor in CADWorx 2015 that are easier for designers to use and can help improve catalog development and encourage more designers to work in the same platform during the project''s earliest stages, helping standardize the design team and provide better drawing and reporting consistency. Engineering, construction an ...


13.11.2014

Intergraph(R) CAESAR II(R) Webinar November 18th to Discuss How to Resolve Failure to Launch Non-Convergence Conditions During Pipe Stress Modeling and Analysis

HOUSTON, TX -- (Marketwired) -- 11/11/14 -- Intergraph will host a CAESAR II webinar on November 18, 2014 at 10:00 a.m. CT that will discuss how to resolve non-linear situations that can occur during pipe stress analysis of models that cause non-convergence conditions and failure to launch. While CAESAR II can model many of these nonlinear restraint conditions that occur in the field such as liftoff supports, gaps and restraints and friction that can be resolved using the F=KX approach, sometim ...


11.11.2014

Intergraph(R) Webinar Series During November in Europe on How Integrating Finite Element Analysis With Traditional Methods of Pipe and Vessel Design Analysis Helps Avoid Unnecessary and Costly Design Changes

HOUSTON, TX -- (Marketwired) -- 11/10/14 -- Intergraph is hosting a webinar in five languages starting with English on 13 November, 2014 at 11:00 a.m. CET that will discuss how finite element analysis (FEA) can be used in conjunction with traditional pipe and vessel stress analysis and design methods to fix issues that are commonly identified, such as overstress locations and/or high equipment loads, without changing the design or routing. The webinar will discuss how this integration of FEA wi ...


10.11.2014

Intergraph(R) GT STRUDL(R) Webinar on November 5th to Demonstrate Building Accurate Models Part 2 Including Finite Element Analysis and Non-Linear Base Plate and Offshore Modeling

HOUSTON, TX -- (Marketwired) -- 10/29/14 -- Intergraph is conducting a GT STRUDL webinar, Building Accurate Models Part 2, on November 5, 2014 at 10:00 a.m. CT that will demonstrate finite element analysis of structure models, non-linear base plate analysis and the analysis and design of offshore structures including automatic generation of sea environment loadings involving wind, wave, soil interaction, fatigue and other offshore considerations. The webinar leaders will be Dr. Leroy Emkin, exe ...


29.10.2014

Intergraph(R) PV Elite(R) Webinar October 30th to Demonstrate Assessing Vessel Corrosion and Remaining Life

HOUSTON, TX -- (Marketwired) -- 10/24/14 -- Intergraph is hosting a PV Elite webinar on October 30, 2014 at 10:00 a.m. CT that will discuss the concepts of the damage-controlled general corrosion assessment using API 479, Part 4 to analyze fitness for service of pressure vessels. The webinar will cover all of the different calculations involved in a Level 1 and Level 2 assessment including the acceptance criteria and the remaining life of the equipment. The benefits of such an assessment can in ...


23.10.2014

Intergraph(R) CADWorx(R) Webinar October 28th to Demonstrate Core Capabilities for Creating Specifications and Working With ISOGEN

HOUSTON, TX -- (Marketwired) -- 10/15/14 -- Intergraph is hosting a CADWorx webinar on October 28, 2014 at 10:00 a.m. CT that will demonstrate core strengths of CADWorx for creating specifications and working with ISOGEN, the industry''s de facto and dependable standard for creating isometric drawings. The flexibility and short learning curve of the CADWorx Plant Design Suite are cores of its dependability that make it uniquely suited for small to midcap projects. It allows for the se ...


15.10.2014

Intergraph(R) Releases CADWorx(R) 2015 for Intelligent AutoCAD(R)-Based 3D Plant Design With New Capabilities and Performance Enhancements

HOUSTON, TX -- (Marketwired) -- 10/07/14 -- Intergraph has announced the release of CADWorx 2015, the next generation software solution for plant design and automation that now adds capabilities to CADWorx Design Review that allow the generation of *.iFV files for viewing, sharing and reviewing CADWorx design models on the Apple® iPad® using the free Intergraph® FreeView® app. Other CADWorx 2015 enhancements include capabilities for routing of mitered elbows, skewed pipe design, and male and fe ...


06.10.2014

Intergraph(R) CAESAR II(R) Webinar October 9th to Demonstrate Joint Feature Release of CAESAR II and FEA Tools

HOUSTON, TX -- (Marketwired) -- 09/30/14 -- Intergraph will host a webinar on October 9, 2014 at 10:00 a.m. CT that will review the joint feature release of CAESAR II version 7.0 and FEA Tools version 2.0 including demonstrations on how to use the B31.3 stress index field (SIF) and the sustained stress index (SSI) in test results. The webinar will include a collapse test to demonstrate how a B31.3 torsion allowable moment can be greater than the collapse moment. Other demonstrations include a s ...


30.09.2014

Intergraph(R) CADWorx(R) Webinar September 30th to Demonstrate How to Import Catalogs and Libraries From Other Applications to Create Data Sets

HOUSTON, TX -- (Marketwired) -- 09/19/14 -- Intergraph is hosting a CADWorx webinar on September 30, 2014 at 10:00 a.m. CT that will demonstrate how to import catalogs and libraries from older versions of CADWorx and from other piping design applications, providing the benefit of leveraging information across applications to help reduce time and costs associated with creating data sets. The webinar will cover importing and working with specifications and catalogs from legacy CADWorx piping and ...


19.09.2014

Intergraph(R) GT STRUDL(R) Webinar on September 30th to Demonstrate Building Accurate Models Part 1

HOUSTON, TX -- (Marketwired) -- 09/17/14 -- Intergraph is conducting a GT STRUDL webinar, Building Accurate Models Part 1, on September 30, 2014 at 10:00 a.m. CT that will demonstrate the ease of building integrated and scalable structures using the software. The webinar will discuss the consistency the intuitive model building process provides, the integrated static and dynamic design analysis capabilities, and the scalability that can be implemented incrementally as project demands change and ...


17.09.2014

Intergraph(R) CADWorx(R) & Analysis University 2014 Express Events in Amsterdam, London, Milan, Madrid and France on October 7-16 to Provide CADWorx, CAESAR II(R) and PV Elite(R) Training

HOUSTON, TX -- (Marketwired) -- 09/17/14 -- Intergraph is hosting CADWorx & Analysis University 2014 (CAU2014) Express training events in Europe starting on October 7, 2014 in Amsterdam, Netherlands followed by October 9th in London, UK; October 13th in Milan, Italy; October 15th in Madrid, Spain, and October 16th in Paris, France.These one-day events provide in-depth training sessions on Intergraph CADWorx, CAESAR II, and PV Elite designed to help users become better plant designers and en ...


17.09.2014

Intergraph CAESAR II(R) webinar December 6th to demonstrate evaluating bends with attachments in piping design

HOUSTON, TX -- (Marketwired) -- 11/17/16 -- Intergraph is hosting a CAESAR II webinar on December 6, 2016 at 10:00 a.m. CST / 5:00 p.m. CET (Amsterdam) that will demonstrate how to model and evaluate bends with attachments in piping systems. Attachments affect the elbow''s flexibility and strength, but the piping codes do not define required adjustments to these flexibility and stress intensification factors for use in piping system analysis and design. This webinar will cover importa ...


17.11.2016

Intergraph(R) CAESAR II(R) webinar October 24th to discuss how to implement planned ASME code changes for better piping design

HOUSTON, TX -- (Marketwired) -- 10/18/16 -- Intergraph will host a CAESAR II webinar on October 24, 2016 at 10:00 a.m. CDT (Houston) / 5:00 p.m. CEST (Amsterdam) that will discuss planned ASME B31.3 code changes in the B31J standard test method for determining stress intensification factors, flexibility factors and sustained stress indices for metallic piping components covered in ASME document STP-PT-073. Participants will learn how to easily evaluate and implement these in pipe stress analysi ...


18.10.2016

Intergraph(R) PV Elite(R) Webinar October 27th to Demonstrate Tools and Configuration in Pressure Vessel Design

HOUSTON, TX -- (Marketwired) -- 10/16/16 -- Intergraph will host a PV Elite webinar on October 27, 2016 at 10:00 a.m. CDT (Houston) / 5:00 p.m. CEST (Amsterdam) that will demonstrate tools and configuration techniques that can increase productivity in vessel design and allow the user to extract valuable information about a vessel being designed. The webinar will include insider tips from a PV Elite expert that can streamline workflows and shortcuts on building vessel models faster and more effi ...


16.10.2016

Intergraph(R) PV Elite(R) Webinar August 25th to Demonstrate Pressure Vessel Design to Avoid Collapse Due to Vacuum

HOUSTON, TX -- (Marketwired) -- 08/10/16 -- Intergraph will host a PV Elite webinar on August 25, 2016 at 10:00 a.m. CDT (Houston) / 5:00 p.m. CEST (Amsterdam) that will demonstrate pressure vessel design using the code approach for vacuum conditions. When a vacuum occurs, the vessel can experience a sudden and catastrophic collapse without any warning. When this happens, it can destroy the vessel itself plus equipment attached to the vessel, causing extensive damage. Using the appropriate vess ...


10.08.2016

Intergraph(R) Webinar August 23-25 to Discuss CAESAR II(R) 2017 Enhancements for Pipe System Analysis

HOUSTON, TX -- (Marketwired) -- 08/05/16 -- Intergraph will host a webinar on August 23, 2016 at 10:00 a.m. CDT (Houston) / 5:00 p.m. CEST (Amsterdam) and repeating on August 24th at 9:00 p.m. CDT (Houston) / August 25th at 12:00 p.m. AEST (Melbourne) that will discuss what''s new in CAESAR II 2017, including several highly anticipated enhancements for faster modeling and more accurate pipe system analysis. The webinar will cover the large-scale ASME B31.4 code update for liquid pipel ...


05.08.2016

Intergraph(R) CAESAR II(R) Webinars to Demonstrate Customization Options

HOUSTON, TX -- (Marketwired) -- 03/21/16 -- Intergraph will host a CAESAR II webinar on March 29 at 10:00 a.m. CDT (Houston) / 5:00 p.m. CEST (Amsterdam) and again on March 30 at 8:00 p.m. CDT (Houston) / March 31 at 12:00 p.m. AEDT (Melbourne) that will demonstrate several easy adjustments users can make in the program environment to help simplify and speed up input and provide more content when creating piping models and evaluating piping system stresses. The webinar will discuss ways to orga ...


21.03.2016

Intergraph(R) Webinar March 24th to Demonstrate Creating More Complex Pipe Support Assemblies Using CADWorx(R) 2016

HOUSTON, TX -- (Marketwired) -- 03/10/16 -- Intergraph will host a webinar on March 24, 2016 at 10:00 a.m. CT that will demonstrate the new pipe support assembly capabilities in CADWorx 2016. This new pipe support assembly will allow users to create more complex assemblies such as a pipe clamp hanger and place the support with the steel detect insertion option. The webinar will show users how to connect individual support components and combine them into an assembly and how to build complex sup ...


10.03.2016

Intergraph(R) Webinar March 1st to Demonstrate Improved Pipe Support Assembly Using CADWorx(R) 2016

HOUSTON, TX -- (Marketwired) -- 02/16/16 -- Intergraph will host a webinar on March 1, 2016 at 10:00 a.m. CT that will demonstrate pipe support assemblies using the CADWorx 2016 support modeler, making pipe support management scalable. The tool helps streamline modeling while feeding Isogen to automate the generation of fabrication drawings and CAESAR II for piping system analysis. The webinar will discuss how to develop an in-depth, detailed pipe support library to help reduce isometric cleanu ...


16.02.2016

Intergraph(R) Webinar on January 26th to Introduce New Load Case Editor in CAESAR II 2016 to Support Updates in B31.3 Piping Code

HOUSTON, TX -- (Marketwired) -- 01/13/16 -- Intergraph will host a webinar on January 26, 2016 at 10:00 a.m. CST that will discuss the newly redesigned static load case editor in CAESAR II 2016 (8.00) that supports the 2014 edition of the B31.3 code for process plant piping. This latest ASME code requires that the piping design use the maximum of all longitudinal stress (SL) values to determine the expansion allowable stress and consider all support conditions in determining the SL values. The ...


13.01.2016



All members: 9 438
Register today: 0
Register yesterday: 0
Members online: 0
Guests online: 48


Don't have an account yet? You can create one. As registered user you have some advantages like theme manager, comments configuration and post comments with your name.