Skeena Adds Near Surface Mineralization in 22 Zone With 6.00 g/t AuEq over 26.28 metres
(firmenpresse) - Vancouver, BC (January 6, 2021) Skeena Resources Limited (TSX: SKE, OTCQX: SKREF) (Skeena or the Company - https://www.commodity-tv.com/ondemand/companies/profil/skeena-resources-ltd/) is pleased to report additional diamond drill core results from the Phase 1 and Phase 2 combined campaigns of definition and exploration drilling at the Eskay Creek Project (Eskay Creek or the Project) located in the Golden Triangle of British Columbia. The Phase 2 infill program, focused upon resource category conversions for the Pre-Feasibility Study (PFS) on open-pit constrained resources, is on-going with six drill rigs currently active. Reference images are presented at the end of this release as well as on the Companys website.
Eskay Creek Infill Drilling Highlights
22 Zone
- 3.05 g/t Au, 221 g/t Ag (6.00 g/t AuEq), over 26.28 m (SK-20-481)
- 4.44 g/t Au, 228 g/t Ag (7.48 g/t AuEq), over 14.50 m (SK-20-500)
- 12.94 g/t Au, 503 g/t Ag (19.65 g/t AuEq), over 9.87 m (SK-20-507)
21 B & C Zone
- 3.65 g/t Au, 5 g/t Ag (3.71 g/t AuEq), over 25.71 m (SK-20-494)
- 3.23 g/t Au, 9 g/t Ag (3.35 g/t AuEq), over 29.35 m (SK-20-483)
- 2.82 g/t Au, 10 g/t Ag (2.95 g/t AuEq), over 31.10 m (SK-20-484)
- 5.34 g/t Au, 7 g/t Ag (5.44 g/t AuEq), over 28.65 m (SK-20-486)
Gold Equivalent (AuEq) calculated via the formula: Au (g/t) + [Ag (g/t) / 75]. True widths range from 70-100% of reported core lengths. Apparent widths are reported for the 22 Zone due to the geometry of the mineralization and the orientation of the drill holes. Length weighted AuEq composites are constrained by geological considerations. Grade-capping of individual assays has not been applied to the Au and Ag assays informing the length-weighted AuEq composites. Metallurgical processing recoveries have not been applied to the AuEq calculation and are taken at 100%. Samples below detection limit were nulled to a value of zero.
Shallow High-Grade Mineralization Discovered in 22 Zone
Inferred mineralization reported in the Companys 2019 Mineral Resource Estimate for the southeastern portion of the 22 Zone was informed by widely spaced historical drill holes. The recent infill drilling program in the 22 Zone has discovered Au-Ag mineralization at surface within the resource reporting pit. The new discovery is highlighted by the 2020 Phase 1 intercept of 3.05 g/t Au, 221 g/t Ag (6.00 g/t AuEq), over 26.28 m which includes high-tenor sub-intervals grading 7.82 g/t Au, 724 g/t Ag (17.47 g/t AuEq) over 1.35 m and 3.18 g/t Au, 2,210 g/t Ag (32.65 g/t AuEq) over 1.50 m (SK-20-481), starting at 1.22 m from surface. This mineralization is corroborated up-dip by SK-20-437 and SK-20-438 which intersected 2.45 g/t AuEq over 21.00 m and 3.16 g/t AuEq over 13.00 m respectively. Refer to vertical section 930-22N below.
This new discovery within the pit-constrained 22 Zone resource model was originally considered an area of unmineralized waste due to a lack of drilling and as such was not incorporated into Skeenas 2019 PEA, comments Paul Geddes, the Companys Vice President of Exploration and Resource Development. The grade and location of these recent intersections are expected to translate into additional resources when the 2020 drilling data is incorporated into the new resource model during Q1 2021.
Preliminary Tom MacKay Exploration Identifies Footwall Replacement Mineralization
The Tom MacKay Zone is situated 2,500 m southwest of the main Eskay Creek deposits and represents a near surface, sparsely drilled historical Au-Ag occurrence hosted in footwall andesites, intermediate volcanics and the Even Lower Mudstone (ELM). The Company drilled a total of nine surface drill holes fanned from two drill pads in this area to confirm the historical data, gain geological understanding as well as test for additional mineralization.
This initial program of exploratory drill testing by Skeena has yielded discordant replacement style Au-Ag mineralization including 4.99 g/t Au, 5 g/t Ag (5.05 g/t AuEq), over 10.50 metres, including 24.20 g/t Au, <5 g/t Ag (24.20 g/t AuEq), over 1.50 metres (SK-20-466), 2.02 g/t Au, 14 g/t Ag (2.21 g/t AuEq), over 14.50 metres (SK-20-464) and 3.29 g/t Au, 9 g/t Ag (3.41 g/t AuEq), over 9.40 metres, including 14.10 g/t Au, 19 g/t Ag (14.35 g/t AuEq), over 1.40 metres (SK-20-433).
Exploration Update
The Company currently has six drill rigs operating at Eskay Creek finalizing the Phase II program of category conversion drilling. This program will be complete in mid-January 2021 at which point the drills will be re-assigned to a 5,000 m exploratory program testing targets in the near mine environment. All drilling from the Phase 2 program will be incorporated into the updated 2021 Mineral Resource Estimate.
About Skeena
Skeena Resources Limited is a junior mining company focused on developing the past-producing Eskay Creek gold-silver mine located in Tahltan Territory in the Golden Triangle of northwest British Columbia, Canada. The Company released a robust Preliminary Economic Assessment in late 2019 and is currently focused on infill and exploration drilling at Eskay Creek to advance the project to Prefeasibility. Skeena is also exploring the past-producing Snip gold mine.
On behalf of the Board of Directors of Skeena Resources Limited,
Walter Coles Jr.
President & CEO
Contact Information
Investor Inquiries: info(at)skeenaresources.com
Office Phone: +1 604 684 8725
Company Website: www.skeenaresources.com
In Europe:
Swiss Resource Capital AG
Jochen Staiger
info(at)resource-capital.ch
www.resource-capital.ch
Qualified Persons
Exploration activities at the Eskay Creek Project are administered on site by the Companys Exploration Managers, Raegan Markel, P.Geo. and Adrian Newton, P.Geo. In accordance with National Instrument 43-101 Standards of Disclosure for Mineral Projects, Paul Geddes, P.Geo. Vice President Exploration and Resource Development, is the Qualified Person for the Company and has prepared, validated and approved the technical and scientific content of this news release. The Company strictly adheres to CIM Best Practices Guidelines in conducting, documenting, and reporting the exploration activities on its projects.
Quality Assurance - Quality Control
Once received from the drill and processed, all drill core samples are sawn in half, labelled and bagged. The remaining drill core is subsequently securely stored on site. Numbered security tags are applied to lab shipments for chain of custody requirements. The Company inserts quality control (QC) samples at regular intervals in the sample stream, including blanks and reference materials with all sample shipments to monitor laboratory performance. The QAQC program was designed and approved by Lynda Bloom, P.Geo. of Analytical Solutions Ltd., and is overseen by the Companys Qualified Person, Paul Geddes, P.Geo, Vice President Exploration and Resource Development.
Drill core samples are submitted to ALS Geochemistrys analytical facility in North Vancouver, British Columbia for preparation and analysis. The ALS facility is accredited to the ISO/IEC 17025 standard for gold assays and all analytical methods include quality control materials at set frequencies with established data acceptance criteria. The entire sample is crushed and 1 kg is pulverized. Analysis for gold is by 50 g fire assay fusion with atomic absorption (AAS) finish with a lower limit of 0.01 ppm and upper limit of 100 ppm. Samples with gold assays greater than 100 ppm are re-analyzed using a 50 g fire assay fusion with gravimetric finish. Analysis for silver is by 50 g fire assay fusion with gravimetric finish with a lower limit of 5ppm and upper limit of 10,000 ppm. Samples with silver assays greater than 10,000 ppm are re-analyzed using a gravimetric silver concentrate method. A selected number of samples are also analyzed using a 48 multi-element geochemical package by a 4-acid digestion, followed by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES) and Inductively Coupled Plasma Mass Spectroscopy (ICP-MS) and also for mercury using an aqua regia digest with Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES) finish. Samples with sulfur reporting greater than 10% from the multi-element analysis are re-analyzed for total sulfur by Leco furnace and infrared spectroscopy.
Cautionary note regarding forward-looking statements
Certain statements made and information contained herein may constitute forward looking information and forward looking statements within the meaning of applicable Canadian and United States securities legislation. These statements and information are based on facts currently available to the Company and there is no assurance that actual results will meet managements expectations. Forward-looking statements and information may be identified by such terms as anticipates, believes, targets, estimates, plans, expects, may, will, could or would. Forward-looking statements and information contained herein are based on certain factors and assumptions regarding, among other things, the estimation of mineral resources and reserves, the realization of resource and reserve estimates, metal prices, taxation, the estimation, timing and amount of future exploration and development, capital and operating costs, the availability of financing, the receipt of regulatory approvals, environmental risks, title disputes and other matters. While the Company considers its assumptions to be reasonable as of the date hereof, forward-looking statements and information are not guarantees of future performance and readers should not place undue importance on such statements as actual events and results may differ materially from those described herein. The Company does not undertake to update any forward-looking statements or information except as may be required by applicable securities laws.
Neither the Toronto Stock Exchange nor the Investment Industry Regulatory Organization of Canada accepts responsibility for the adequacy or accuracy of this release.
Table 1: Eskay Creek Project 2020 Length Weighted Drill Hole Gold and Silver Composites:
Hole-IFrom To Core Au Ag AuEq ZonPhas
D (m) (m) Lengt (g/t (g/t (g/t)e e
h ) )
(m)
SK-20-156.03158.1.97 1.75 5 1.82 21C 2
430 00
SK-20- ABANDO
431 NED
SK-20-60.48 67.06.52 1.59 5 1.66 TM 1
432 0
SK-20-141.00150.9.00 1.40 12 1.56 TM 1
432 00
SK-20-173.70176.2.30 0.84 50 1.51 TM 1
432 00
SK-20-10.00 15.55.50 1.04 5 1.10 TM 1
433 0
SK-20-74.10 83.59.40 3.29 9 3.41 TM 1
433 0
inclu74.10 75.51.40 14.1019 14.35 TM 1
ding 0
SK-20-122.00129.7.50 1.77 5 1.84 TM 1
433 50
SK-20-155.00159.4.00 5.30 22 5.60 TM 1
433 00
inclu155.00156.1.58 11.6021 11.88 TM 1
ding 58
SK-20-186.00187.1.50 1.33 15 1.53 TM 1
433 50
SK-20-216.00219.3.50 1.06 29 1.44 TM 1
433 50
SK-20-245.00249.4.00 0.68 26 1.03 TM 1
433 00
SK-20-272.50275.2.50 0.76 29 1.14 TM 1
433 00
SK-20-2.00 12.010.00 0.95 5 1.02 TM 1
434 0
SK-20-15.00 16.51.50 18.955 19.02 TM 1
434 0
SK-20-64.25 65.51.25 1.67 5 1.74 TM 1
434 0
SK-20-128.00136.8.50 2.11 6 2.20 TM 1
434 50
SK-20-155.00159.4.10 1.02 8 1.12 TM 1
434 10
SK-20-164.00171.7.50 1.39 6 1.47 TM 1
434 50
SK-20-177.50185.7.50 3.40 7 3.49 TM 1
434 00
inclu182.00183.1.00 15.1512 15.31 TM 1
ding 00
SK-20-192.50194.1.50 1.03 5 1.10 TM 1
434 00
SK-20-707.00709.2.00 0.94 5 1.01 21C 1
443 00
SK-20-743.00744.1.00 0.93 5 1.00 21C 1
443 00
SK-20-9.50 37.027.50 1.95 5 2.02 22 1
446 0
SK-20-294.00295.1.43 3.41 5 3.48 21C 1
449 43
SK-20-337.00338.1.50 5.11 7 5.20 21C 1
449 50
SK-20-352.61354.1.39 2.10 5 2.17 21C 1
449 00
SK-20-356.96377.20.04 1.09 6 1.17 21C 1
449 00
SK-20-449.73467.17.77 1.68 14 1.86 21C 1
449 50
SK-20-486.50488.1.50 1.22 5 1.29 21C 1
449 00
SK-20-509.00518.9.50 2.24 8 2.35 21C 1
449 50
inclu518.00518.0.50 13.2013 13.37 21C 1
ding 50
SK-20-23.00 24.01.00 2.67 5 2.74 22 1
451 0
SK-20-30.50 33.53.00 1.91 11 2.05 22 1
451 0
SK-20-80.50 88.58.00 0.44 289 4.29 22 1
451 0
inclu87.41 88.51.09 0.86 797 11.49 22 1
ding 0
SK-20-91.24 123.32.26 1.02 6 1.10 22 1
451 50
SK-20-6.00 7.001.00 0.51 71 1.46 22 1
453
SK-20-46.00 101.55.50 1.15 43 1.72 22 1
453 50
SK-20-119.50122.3.00 1.54 12 1.70 22 1
453 50
SK-20-125.50128.3.00 2.03 10 2.16 22 1
453 50
SK-20-148.00149.1.00 1.33 8 1.44 22 1
453 00
SK-20- NSA 22 1
457
SK-20-3.00 7.504.50 4.48 38 4.99 22 1
458
SK-20-33.00 42.09.00 1.82 209 4.60 22 1
458 0
inclu37.50 39.01.50 5.71 978 18.75 22 1
ding 0
SK-20-0.61 8.007.39 6.13 5 6.20 22 1
459
inclu0.61 2.001.39 19.05<5 19.05 22 1
ding
SK-20- NSA 22 1
460
SK-20- NSA 22 1
461
SK-20-1.80 9.007.20 2.56 12 2.72 TM 1
462
SK-20-26.00 27.01.00 1.36 5 1.43 TM 1
462 0
SK-20-29.50 32.53.00 1.21 7 1.30 TM 1
462 0
SK-20-40.00 41.51.50 6.37 6 6.45 TM 1
462 0
SK-20-56.25 60.54.25 2.84 5 2.91 TM 1
462 0
SK-20-99.00 103.4.50 0.96 5 1.02 TM 1
462 50
SK-20-109.50112.3.00 1.69 5 1.76 TM 1
462 50
SK-20-4.00 10.06.00 2.18 5 2.24 TM 1
463 0
SK-20-23.50 29.56.00 3.39 6 3.47 TM 1
463 0
SK-20-34.00 37.03.00 1.11 5 1.17 TM 1
463 0
SK-20-4.50 12.37.80 3.18 7 3.27 TM 1
464 0
SK-20-15.50 30.014.50 2.02 14 2.21 TM 1
464 0
SK-20-36.00 37.11.10 1.74 9 1.86 TM 1
464 0
SK-20-1.20 7.506.30 2.58 9 2.70 TM 1
465
SK-20-47.00 50.23.25 0.80 15 1.01 TM 1
465 5
SK-20-59.00 60.51.50 7.70 5 7.77 TM 1
465 0
SK-20-5.00 15.510.50 4.99 5 5.05 TM 1
466 0
inclu6.50 8.001.50 24.20<5 24.20 TM 1
ding
SK-20-29.75 32.02.25 1.53 11 1.68 TM 1
466 0
SK-20-3.00 5.502.50 2.06 19 2.31 TM 1
467
SK-20-12.00 19.57.50 2.02 5 2.09 TM 1
467 0
SK-20-24.00 27.03.00 1.10 5 1.17 TM 1
467 0
SK-20-62.50 64.52.00 1.01 6 1.09 TM 1
467 0
SK-20-77.50 83.56.00 1.90 10 2.02 TM 1
467 0
SK-20-95.00 97.42.46 1.84 10 1.98 TM 1
467 6
SK-20- NSA 22 1
469
SK-20-17.50 19.01.50 2.52 51 3.20 22 2
470 0
SK-20-56.50 58.01.50 1.07 17 1.30 22 2
470 0
SK-20-60.50 70.09.50 2.57 33 3.00 22 2
470 0
SK-20-85.95 100.14.05 1.94 70 2.88 22 2
470 00
SK-20-11.00 15.54.50 0.81 23 1.12 22 2
471 0
SK-20-72.50 79.06.50 0.71 43 1.28 22 2
471 0
SK-20-84.50 92.07.50 1.36 98 2.67 22 2
471 0
inclu87.50 88.51.00 2.82 611 10.97 22 2
ding 0
SK-20-95.00 105.10.00 1.02 16 1.24 22 2
471 00
SK-20-17.00 21.54.50 1.20 26 1.55 22 2
472 0
SK-20-27.50 29.01.50 0.11 69 1.03 22 2
472 0
SK-20-35.00 36.51.50 1.02 5 1.09 22 2
472 0
SK-20-83.00 88.05.00 1.38 5 1.44 22 2
472 0
SK-20-6.79 13.06.21 1.35 44 1.93 22 2
473 0
SK-20-19.00 20.51.50 0.58 117 2.14 22 2
473 0
SK-20-55.00 60.65.67 0.41 51 1.09 22 2
473 7
SK-20-78.50 80.92.42 0.51 44 1.10 22 2
474 2
SK-20-108.50116.7.50 0.74 22 1.03 22 2
474 00
SK-20-119.00126.7.50 1.01 10 1.14 22 2
474 50
SK-20-128.60140.11.40 0.53 200 3.19 22 2
474 00
inclu132.50134.1.50 0.60 719 10.19 22 2
ding 00
SK-20-37.00 56.519.50 1.89 14 2.07 22 2
475 0
SK-20-59.50 71.011.50 3.78 7 3.87 22 2
475 0
inclu61.00 62.51.50 11.755 11.82 22 2
ding 0
SK-20-78.50 99.521.00 1.62 18 1.86 22 2
475 0
SK-20-113.00123.10.50 1.60 38 2.10 22 2
475 50
inclu118.75119.0.64 11.10204 13.82 22 2
ding 39
SK-20-131.00145.14.00 1.79 134 3.57 22 2
475 00
inclu136.25136.0.54 7.29 607 15.38 22 2
ding 79
and 136.79137.0.72 5.90 635 14.37 22 2
51
SK-20-30.38 32.31.93 1.27 80 2.34 22 2
477 1
SK-20-20.50 22.01.50 1.14 5 1.21 22 2
478 0
SK-20-2.50 31.028.50 0.99 61 1.80 22 2
480 0
inclu10.80 12.01.20 2.74 639 11.26 22 2
ding 0
SK-20-51.00 53.22.20 1.41 10 1.53 22 2
480 0
SK-20-76.43 80.54.07 1.78 13 1.96 22 2
480 0
SK-20-83.80 91.07.20 1.22 31 1.63 22 2
480 0
SK-20-113.50115.1.50 1.21 12 1.37 22 2
480 00
SK-20-1.22 27.526.28 3.05 221 6.00 22 2
481 0
inclu8.50 9.501.00 12.9027 13.26 22 2
ding
and 16.65 18.01.35 7.82 724 17.47 22 2
0
and 18.00 19.51.50 3.18 2,21032.65 22 2
0
SK-20-38.00 40.02.00 0.19 81 1.26 22 2
481 0
SK-20-227.50242.15.00 2.09 7 2.18 21C 2
482 50
SK-20-206.38235.29.35 3.23 9 3.35 21C 2
483 73
inclu226.00227.1.00 19.4019 19.65 21C 2
ding 00
SK-20-202.45233.31.10 2.82 10 2.95 21C 1
484 55
SK-20-218.50219.1.00 8.69 155 10.76 21C 1
484 50
SK-20-168.83174.5.67 1.28 16 1.49 21C 2
485 50
SK-20-212.00236.24.50 2.84 26 3.20 21C 2
485 50
SK-20-200.85229.28.65 5.34 7 5.44 21C 1
486 50
inclu203.00204.1.35 32.60<5 32.60 21C 1
ding 35
and 204.35205.1.38 23.405 23.47 21C 1
73
and 222.00223.1.50 11.4519 11.70 21C 1
50
SK-20-152.00169.17.45 2.01 29 2.40 21B 2
487 45
SK-20-174.42188.13.58 1.58 5 1.65 21B 2
487 00
SK-20-146.00166.20.00 2.98 40 3.51 21B 2
488 00
SK-20-179.00180.1.71 5.40 5 5.46 21B 2
488 71
SK-20-144.50163.18.50 2.31 31 2.72 21B 2
489 00
SK-20-170.50183.12.50 2.63 7 2.72 21B 2
489 00
SK-20-186.00188.2.25 0.67 35 1.13 21B 2
489 25
SK-20-149.50162.13.47 2.15 12 2.31 21B 2
490 97
inclu151.50152.0.65 11.4529 11.84 21B 2
ding 15
SK-20-166.80176.9.20 1.68 6 1.76 21B 2
490 00
SK-20-136.25138.2.56 10.88156 12.95 21B 2
491 81
inclu138.00138.0.81 23.70291 27.58 21B 2
ding 81
SK-20-142.88163.20.67 3.66 35 4.13 21B 2
491 55
SK-20-172.50177.4.50 2.43 42 2.99 21B 2
491 00
SK-20-181.50184.3.00 1.26 5 1.32 21B 2
491 50
SK-20-134.00135.1.17 0.02 96 1.30 21B 2
494 17
SK-20-143.12144.1.68 0.75 38 1.26 21B 2
494 80
SK-20-151.00152.1.76 11.2538 11.76 21B 2
494 76
inclu152.00152.0.76 22.0065 22.87 21B 2
ding 76
SK-20-155.40181.25.71 3.65 5 3.71 21B 2
494 11
SK-20-185.50190.4.50 1.39 5 1.46 21B 2
494 00
SK-20-141.89145.3.51 1.41 18 1.66 21C 1
497 40
SK-20-176.50183.7.00 1.36 6 1.44 21C 1
497 50
SK-20-9.50 15.05.50 0.26 166 2.47 22 2
498 0
SK-20-18.50 24.56.00 4.78 96 6.06 22 2
498 0
SK-20-35.75 46.010.25 0.54 52 1.23 22 2
498 0
SK-20-20.00 23.03.00 0.73 278 4.43 22 2
499 0
SK-20-146.05160.14.50 4.44 228 7.48 22 2
500 55
inclu147.00147.0.60 11.201,11526.07 22 2
ding 60
and 147.60148.1.04 26.001,40044.67 22 2
64
and 148.64149.0.86 8.41 509 15.20 22 2
50
SK-20-222.50231.9.00 2.66 6 2.74 22 2
500 50
SK-20-104.00107.3.00 1.02 13 1.19 22 1
501 00
SK-20-151.95159.7.65 3.14 263 6.64 22 1
501 60
inclu151.95153.1.05 13.35454 19.40 22 1
ding 00
and 153.00154.1.00 3.72 1,21519.92 22 1
00
SK-20-167.00170.3.00 1.40 5 1.47 22 1
501 00
SK-20-108.00109.1.00 1.04 19 1.29 22 1
502 00
SK-20-159.59175.15.41 0.84 26 1.20 22 1
502 00
SK-20-145.95165.19.55 1.45 31 1.87 22 2
503 50
SK-20-173.00175.2.00 1.28 5 1.35 22 2
503 00
SK-20- ABANDO22 2
504 NED
SK-20-143.62147.3.96 1.59 99 2.92 22 2
505 58
SK-20-155.53162.6.47 1.08 7 1.17 22 2
505 00
SK-20-167.00170.3.00 1.23 5 1.29 22 2
505 00
SK-20-137.58146.8.77 2.31 595 10.25 22 2
506 35
inclu142.84144.1.24 5.04 3,35049.71 22 2
ding 08
and 144.08145.1.02 1.73 878 13.44 22 2
10
SK-20-150.00162.12.50 1.05 6 1.12 22 2
506 50
SK-20-168.50174.5.55 1.16 5 1.23 22 2
506 05
SK-20-93.66 103.9.89 1.82 56 2.57 22 2
507 55
inclu97.22 98.00.78 8.48 297 12.44 22 2
ding 0
SK-20-145.13155.9.87 12.94503 19.65 22 2
507 00
inclu146.60148.1.40 65.502,680101.2322 2
ding 00
and 148.00149.1.00 28.301,09042.83 22 2
00
SK-20-188.00192.4.50 0.90 42 1.47 22 2
507 50
SK-20-200.00201.1.50 0.05 84 1.17 22 2
507 50
SK-20-222.50230.7.50 3.66 8 3.77 22 2
507 00
inclu228.00229.1.00 11.6011 11.75 22 2
ding 00
Gold Equivalent (AuEq) calculated via the formula: Au (g/t) + [Ag (g/t) / 75]. True widths range from 70-100% of reported core lengths. Apparent widths are reported for the 22 Zone due to the geometry of the mineralization and the orientation of the drill holes. Length weighted AuEq composites are constrained by geological considerations. Grade-capping of individual assays has not been applied to the Au and Ag assays informing the length-weighted AuEq composites. Metallurgical processing recoveries have not been applied to the AuEq calculation and are taken at 100%. Samples below detection limit were nulled to a value of zero. NSA - No Significant Assays. TM - Tom MacKay.
Table 2: Mine Grid Drill Hole Locations and Orientations:
Hole-ID Easting NorthingElevatioLengthAzimuth Dip
(m) (m) n (m) (°) (°)
(m)
SK-20-43 9,754.1 10,252. 1,015.2158.0 100.0 -65.0
0 5
SK-20-43 9,443.4 10,637. 883.1 53.0 117.6 -44.7
1 7
SK-20-43 9,180.2 6,612.9 1,139.5176.0 269.9 -58.8
2
SK-20-43 9,180.2 6,612.9 1,139.4275.0 330.0 -60.0
3
SK-20-43 9,180.2 6,612.9 1,139.3260.0 300.0 -67.0
4
SK-20-44 9,443.4 10,637. 882.8 779.0 81.2 -50.2
3 7
SK-20-44 9,530.1 8,961.0 1,144.380.0 281.3 -50.0
6
SK-20-44 9,756.5 11,068. 821.1 674.0 89.1 -74.2
9 3
SK-20-45 9,632.6 8,796.4 1,089.6125.0 250.1 -53.9
1
SK-20-45 9,634.4 8,850.4 1,102.3150.0 245.1 -49.0
3
SK-20-45 9,629.9 9,083.9 1,132.215.0 232.1 -46.9
7
SK-20-45 9,631.0 9,066.8 1,127.445.0 225.0 -45.0
8
SK-20-45 9,593.5 9,099.2 1,124.313.0 50.0 -70.1
9
SK-20-46 9,575.0 9,098.8 1,129.630.0 270.0 -50.1
0
SK-20-46 9,580.9 9,084.3 1,128.430.0 270.0 -50.2
1
SK-20-46 9,110.8 6,611.7 1,106.9131.0 23.5 -45.8
2
SK-20-46 9,110.8 6,611.7 1,106.9101.0 110.2 -45.4
3
SK-20-46 9,110.8 6,611.7 1,106.4116.0 65.8 -45.2
4
SK-20-46 9,110.8 6,611.7 1,108.178.0 200.5 -45.7
5
SK-20-46 9,110.8 6,611.7 1,108.180.0 149.8 -46.0
6
SK-20-46 9,110.8 6,611.7 1,106.3110.0 150.0 -89.4
7
SK-20-46 9,629.9 9,083.9 1,132.150.0 231.9 -47.0
9
SK-20-47 9,634.4 8,850.4 1,102.4100.0 236.2 -56.9
0
SK-20-47 9,634.4 8,850.4 1,102.6105.0 267.0 -64.0
1
SK-20-47 9,634.4 8,850.4 1,102.288.0 285.2 -61.0
2
SK-20-47 9,632.6 8,796.4 1,089.6145.0 64.2 -86.1
3
SK-20-47 9,632.6 8,796.4 1,089.9140.0 250.1 -76.1
4
SK-20-47 9,632.6 8,796.4 1,089.7145.0 248.0 -68.1
5
SK-20-47 9,648.6 8,743.5 1,080.2120.0 124.9 -74.1
7
SK-20-47 9,648.6 8,743.5 1,081.9110.0 177.0 -69.0
8
SK-20-48 9,632.8 8,768.6 1,084.0115.0 150.1 -80.0
0
SK-20-48 9,632.8 8,768.6 1,084.4107.0 320.1 -86.1
1
SK-20-48 9,838.5 10,514. 993.9 248.0 202.0 -79.9
2 2
SK-20-48 9,838.5 10,514. 993.9 242.0 202.2 -82.9
3 2
SK-20-48 9,838.5 10,514. 994.7 238.0 202.3 -85.9
4 2
SK-20-48 9,838.5 10,514. 994.3 245.0 257.9 -85.2
5 2
SK-20-48 9,838.5 10,514. 997.5 240.0 257.9 -88.1
6 2
SK-20-48 9,877.6 10,535. 986.7 195.0 43.1 -81.9
7 5
SK-20-48 9,877.6 10,535. 985.1 195.0 61.4 -80.4
8 5
SK-20-48 9,877.6 10,535. 985.6 195.0 80.3 -82.9
9 5
SK-20-49 9,877.6 10,535. 985.1 191.0 80.0 -88.1
0 5
SK-20-49 9,877.6 10,535. 985.6 205.0 85.0 -74.0
1 5
SK-20-49 9,877.6 10,535. 985.6 200.0 134.7 -80.1
4 5
SK-20-49 9,757.3 10,703. 910.6 195.0 78.9 -63.1
7 6
SK-20-49 9,636.1 8,835.1 1,100.285.0 230.1 -56.1
8
SK-20-49 9,636.1 8,835.1 1,100.380.0 230.2 -72.1
9
SK-20-50 9,738.1 10,633. 923.9 237.0 2.2 -85.2
0 7
SK-20-50 9,738.1 10,633. 923.8 175.0 1.9 -80.0
1 7
SK-20-50 9,738.1 10,633. 923.4 175.0 2.1 -75.8
2 7
SK-20-50 9,738.1 10,633. 922.6 175.0 28.7 -80.7
3 7
SK-20-50 9,738.1 10,633. 925.2 18.5 50.1 -78.8
4 7
SK-20-50 9,738.1 10,633. 922.9 170.0 50.0 -85.1
5 7
SK-20-50 9,738.1 10,633. 922.7 175.0 74.1 -81.0
6 7
SK-20-50 9,738.1 10,633. 923.0 233.0 248.3 -89.9
7 7
https://www.irw-press.at/prcom/images/messages/2021/54975/Skeena_EN1.001.png
https://www.irw-press.at/prcom/images/messages/2021/54975/Skeena_EN1.002.png
Themen in dieser Pressemitteilung:
Unternehmensinformation / Kurzprofil:




">

">
Datum: 06.01.2021 - 12:36 Uhr
Sprache: Deutsch
News-ID 1563569
Anzahl Zeichen: 33152
contact information:
Contact person:
Town:
Wien
Phone:
Kategorie:
Business News
Typ of Press Release:
type of sending:
Date of sending:
Anmerkungen:
Diese Pressemitteilung wurde bisher 290 mal aufgerufen.
Die Pressemitteilung mit dem Titel:
"Skeena Adds Near Surface Mineralization in 22 Zone With 6.00 g/t AuEq over 26.28 metres
"
steht unter der journalistisch-redaktionellen Verantwortung von
Skeena Resources Ltd. (Nachricht senden)
Beachten Sie bitte die weiteren Informationen zum Haftungsauschluß (gemäß TMG - TeleMedianGesetz) und dem Datenschutz (gemäß der DSGVO).