Skeena Intersects 16.64 g/t Au over 5.10 m in 200 Footwall at Snip
(firmenpresse) - Vancouver, BC (January 9, 2020) Skeena Resources Limited (TSX.V: SKE, OTCQX: SKREF - https://www.commodity-tv.com/play/skeena-resources-exploration-and-development-of-historic-gold-mine-deal-with-barrick/) (Skeena or the Company) is pleased to announce the remaining analytical results from the 2019 Phase I surface exploration drilling program at the 100% owned Snip gold project (Snip) located in the Golden Triangle of British Columbia. The 2019 exploration program consisted of 10 surface drill holes totaling 1,934 m which tested the 200 Footwall Corridor (200 Footwall). Reference images are presented at the end of this release as well as on the Companys website (https://www.skeenaresources.com/projects/snip/maps-and-figures).
2019 Phase I Snip Project Drilling Highlights:
- 16.64 g/t Au over 5.10 m (S19-035)
o Including: 96.20 g/t Au over 0.50 m
o And 39.80 g/t Au over 0.85 m
- 57.90 g/t Au over 0.65 m (S19-041)
- 57.00 g/t Au over 0.50 m (S19-041)
- 12.00 g/t Au over 1.35 m (S19-043)
Core lengths are reported due to a lack of supporting data to properly calculate true widths. Length weighted composites were constrained by geological and grade considerations. Grade capping of individual assays has not been applied to the Au assays informing the length weighted composites. Samples below detection limit were nulled to a value of zero.
New Mineralization Intersected in 200 Footwall
Phase I surface drill hole S19-035 has successfully intersected a new zone of high-grade gold mineralization averaging 16.64 g/t Au over 5.10 m including two sub-intervals grading 96.20 g/t Au over 0.50 m and 39.80 g/t Au over 0.85 m in the 200 Footwall. This zone is located 100 m vertically below surface and 370 m east of the recently reported Phase I 200 Footwall discovery intercept which graded 1,131.91 g/t (36.39 oz/t) Au over 1.50 m (S19-044). The area surrounding the new zone is open down-dip and down-plunge.
The outstanding analytical results for drill holes S19-043 and S19-044 have been received. The high-grade intercept in S19-044 occurred at a depth of 249.60 m. Additional results for this drill hole include 12.60 g/t Au over 0.50 m and 7.41 g/t Au over 0.60 m occurring at 242.35 m and 214.80 m respectively.
Phase I drill hole S19-043 was completed prior to the newly discovered mineralization in drill hole
S19-044 and intersected anomalous gold grades associated with sheared veining including 12.00 g/t Au over 1.35 m. Recently completed modelling of the 200 Footwall mineralization indicates that this drill hole did not extend deep enough to adequately test the 200 Footwall and will be deepened during the next phase of drilling at Snip.
About Skeena
Skeena Resources Limited is a junior Canadian mining exploration company focused on developing prospective precious and base metal properties in the Golden Triangle of northwest British Columbia, Canada. The Companys primary activities are the exploration and development of the past-producing Snip mine and the Eskay Creek mine. In addition, the Company has completed a Preliminary Economic Assessment on the GJ copper-gold porphyry project.
On behalf of the Board of Directors of Skeena Resources Limited,
https://www.irw-press.at/prcom/images/messages/2020/49719/Skeena Intersects 16 64 gt Au over 5 10 m in 200 Footwall at Snip_FINAL2 ENPRcom.001.jpeg
Walter Coles Jr.
President & CEO
In Europe:
Swiss Resource Capital AG
Jochen Staiger
info(at)resource-capital.ch
www.resource-capital.ch
Qualified Persons
Exploration activities at the Eskay Creek Project are administered on site by the Companys Exploration Managers, Colin Russell, P.Geo. and Adrian Newton, P.Geo. In accordance with National Instrument 43-101 Standards of Disclosure for Mineral Projects, Paul Geddes, P.Geo. Vice President Exploration and Resource Development, is the Qualified Person for the Company and has prepared, validated and approved the technical and scientific content of this news release. The Company strictly adheres to CIM Best Practices Guidelines in conducting, documenting, and reporting its exploration activities on its exploration projects.
Quality Assurance - Quality Control
Once received from the drill and processed, all drill core samples are sawn in half, labelled and bagged. The remaining drill core is subsequently securely stored on site. Numbered security tags are applied to lab shipments for chain of custody requirements. The Company inserts quality control (QC) samples at regular intervals in the sample stream, including blanks and reference materials with all sample shipments to monitor laboratory performance. The QAQC program was designed and approved by Lynda Bloom, P.Geo. of Analytical Solutions Ltd., and is overseen by the Companys Qualified Person, Paul Geddes, P.Geo, Vice President Exploration and Resource Development.
Drill core samples are submitted to ALS Geochemistrys analytical facility in North Vancouver, British Columbia for preparation and analysis. The ALS facility is accredited to the ISO/IEC 17025 standard for gold assays and all analytical methods include quality control materials at set frequencies with established data acceptance criteria. The entire sample is crushed and 1kg is pulverized. Analysis for gold is by 50g fire assay fusion with atomic absorption (AAS) finish with a lower limit of 0.01 ppm and upper limit of 100 ppm. Samples with gold assays greater than 100ppm are re-analyzed using a 50g fire assay fusion with gravimetric finish. Analysis for silver is by 50g fire assay fusion with gravimetric finish with a lower limit of 5ppm and upper limit of 10,000ppm. Samples with silver assays greater than 10,000ppm are re-analyzed using a gravimetric silver concentrate method. A selected number of samples are also analyzed using a 48 multi-elemental geochemical package by a 4-acid digestion, followed by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES) and Inductively Coupled Plasma Mass Spectroscopy (ICP-MS) and also for mercury using an aqua regia digest with Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES) finish. Samples with sulfur reporting greater than 10% from the multi-element analysis are re-analyzed for total sulfur by Leco furnace and infrared spectroscopy.
Cautionary note regarding forward-looking statements
Certain statements made and information contained herein may constitute forward looking information and forward looking statements within the meaning of applicable Canadian and United States securities legislation. These statements and information are based on facts currently available to the Company and there is no assurance that actual results will meet managements expectations. Forward-looking statements and information may be identified by such terms as anticipates, believes, targets, estimates, plans, expects, may, will, could or would. Forward-looking statements and information contained herein are based on certain factors and assumptions regarding, among other things, the estimation of mineral resources and reserves, the realization of resource and reserve estimates, metal prices, taxation, the estimation, timing and amount of future exploration and development, capital and operating costs, the availability of financing, the receipt of regulatory approvals, environmental risks, title disputes and other matters. While the Company considers its assumptions to be reasonable as of the date hereof, forward-looking statements and information are not guarantees of future performance and readers should not place undue importance on such statements as actual events and results may differ materially from those described herein. The Company does not undertake to update any forward-looking statements or information except as may be required by applicable securities laws.
Neither TSX Venture Exchange nor the Investment Industry Regulatory Organization of Canada accepts responsibility for the adequacy or accuracy of this release.
Table 1: Snip Project 2019 Phase I length weighted drill hole gold composites:
HOLE-ID FROM (m) TO (m) CORE AU (g/t) AREA
LENGTH
(
m)
S19-035 128.65 133.75 5.10 16.64 200
INCLUDING 128.65 129.15 0.50 96.20 200
AND 129.15 130.00 0.85 39.80 200
S19-041 80.00 81.50 1.50 5.89 HW
S19-041 83.85 84.50 0.65 57.90 HW
S19-041 94.10 94.60 0.50 57.00 200
S19-041 106.40 106.90 0.50 6.74 200
S19-042 63.32 67.00 3.68 6.72 HW
INCLUDING 65.50 66.00 0.50 15.95 HW
AND 66.00 66.50 0.50 18.45 HW
S19-042 112.00 112.50 0.50 10.85 200
S19-043 167.65 169.00 1.35 12.00 HW
S19-043 177.60 178.10 0.50 4.42 HW
S19-044 214.80 215.40 0.60 7.41 UPPER
S19-044 216.30 217.15 0.85 4.41 UPPER
S19-044 242.35 242.85 0.50 12.60 LOWER
Core lengths are reported due to a lack of supporting data to properly calculate true widths. Length weighted composites were constrained by geological and grade considerations. Grade capping of individual assays has not been applied to the Au assays informing the length weighted composites. Samples below detection limit were nulled to a value of zero.
Table 2: Mine grid coordinate system Phase I drill hole locations and orientations:
HOLE-IDEASTING (mNORTHING (ELEVATION LENGTH AZIMUTH DIP
) m) (m) (
m)
S19-0354517.8 2206.5 454.0 279.0 269.1 -69.9
S19-0414652.3 2285.5 533.3 177.0 330.0 -50.7
S19-0424652.0 2285.0 534.4 200.0 321.0 -67.0
S19-0434217.0 1972.0 272.8 266.0 349.6 -71.6
S19-0444217.0 1972.0 272.8 257.0 357.9 -48.0
https://www.irw-press.at/prcom/images/messages/2020/49719/Skeena Intersects 16 64 gt Au over 5 10 m in 200 Footwall at Snip_FINAL2 ENPRcom.002.png
https://www.irw-press.at/prcom/images/messages/2020/49719/Skeena Intersects 16 64 gt Au over 5 10 m in 200 Footwall at Snip_FINAL2 ENPRcom.003.png
https://www.irw-press.at/prcom/images/messages/2020/49719/Skeena Intersects 16 64 gt Au over 5 10 m in 200 Footwall at Snip_FINAL2 ENPRcom.004.png
Themen in dieser Pressemitteilung:
Unternehmensinformation / Kurzprofil:
" alt="Osino Resources Drills 92m at 1.40 g/t and 37m At 2.58 g/t, Increases Strike by 50% at Twin Hills Central Discovery, Karibib Gold Project, Namibia">
" alt="White Gold Corp. Intercepts High-Grade Gold on 5 New Drill Targets on JP Ross Property Further Validating and Extending Regional Scale Mineralized Footprint">
Datum: 09.01.2020 - 08:20 Uhr
Sprache: Deutsch
News-ID 1555137
Anzahl Zeichen: 2509
contact information:
Contact person:
Town:
Wien
Phone:
Kategorie:
Business News
Typ of Press Release:
type of sending:
Date of sending:
Anmerkungen:
Diese Pressemitteilung wurde bisher 324 mal aufgerufen.
Die Pressemitteilung mit dem Titel:
"Skeena Intersects 16.64 g/t Au over 5.10 m in 200 Footwall at Snip
"
steht unter der journalistisch-redaktionellen Verantwortung von
Skeena Resources Ltd. (Nachricht senden)
Beachten Sie bitte die weiteren Informationen zum Haftungsauschluß (gemäß TMG - TeleMedianGesetz) und dem Datenschutz (gemäß der DSGVO).
