cab product launches at FachPack 2019
- Third generation of proven Hermes label print and apply systems
- Tube labeler identifying laboratory samples
(firmenpresse) - Third generation of proven Hermes label print and apply systems
About 20 years after the initial product launch and nine years after a redesign cab introduces HERMES Q. They are based on the main board of the latest cab label printing systems, offering a powerful CPU. Process and print data might happen three times faster with the current processors. Printing is possible at print speeds up to.
HERMES Q processes all standard label materials made of paper or plastics, wound on rolls (as is the case with all the models) or reels (only the 2" device). Label unwinding has been optimized to minimize the influence of the label roll inertia throughout the entire processing. Pivoted peel-off plates enable to handle even label materials that are difficult to dispense or can hardly be removed from the liner. Ribbon guiding can be set both on the unwinder and the rewinder units. In case labels are only partially printed, the ribbon can be stopped during label feed. With the help of this automatic saver mechanism, material consumption is reduced significantly.
y the labels on products or packaging, the print units can be expanded with the applicator portfolio of the previous Hermes+ series. Assembled to hinge pins on the chassis of the HERMES Q, they can be easily pivoted for maintenance. A wide range of accessorial floor stands and assembly aids, sensors and switches facilitate the HERMES Q to integrate in production lines already existing and simplify the planning of new ones.
HERMES Q is operated intuitively on a colored touch display. If the device is difficult to access on-site, an external operation panel can be attached to provide the same functionality. The devices can be also controlled remote via smartphone, tablet or PC. An OPC UA server and client has been integrated in the firmware, allowing HERMES Q to interact with machines and components of different manufacturers in industrial environments.
Tube labeler identifying laboratory samples
In order to evaluate laboratory analyses reliably and quickly, tubes can be labeled uniquely with the help of the SQUIX label printer. For this purpose, the printer is expanded with an AXON 2 labeler. Self-adhesive barcode labels (2D or linear) are printed by the device and applied on the tubes. The information provided on a label remains clearly legible even in the long term and at temperatures ranging from minus 196 mode. The print speed is 100 mm/s. Tubes of diameters between 10 and 17 mm can be processed, capped or not capped.
The SQUIX expanded by an AXON 2 suits for labeling tubes individually on manual workstations, but it may also be integrated in automated sample processing systems. For this set up, the tubes are for example inserted horizontally in the device by a robot arm and removed again after the labeling. Printing and tube labeling take less than two seconds of time. Manual errors are eliminated, so are unergonomical activities. Labeled tubes can either be removed manually one by one or be ejected to a tray.
Low-noise operation perfectly fits with applications in laboratories, doctorsentered via keyboard or scanner. Power is supplied to the tube marker by 110 to 240 VAC mains voltage, 24 to 60 VDC voltage is an option.
cab at FachPack
As one of only few manufacturers on the market, cab provides the full range of labeling solutions for any application: September 24 to 26, 2019, Nuremberg, hall 4, booth 4-308
The SQUIX with an AXON 2 print and apply system will also be part of the
Themen in dieser Pressemitteilung:
Unternehmensinformation / Kurzprofil:
cab is Europe’s leading manufacturer of devices and systems to label individual components, units, products and packaging. Healthy global growth, both technical and functional lead and competent customer support are prior goals of the company. There are 400 employees in Germany and in seven subsidiaries abroad as well as 820 distribution partners in more than 80 countries to meet the targets.
Guntram Stadelmann, cab Produkttechnik GmbH & Co KG, Wilhelm-Schickard-Str. 14, 76131 Karlsruhe, Phone: +49 721 6626-285, Fax: +49 721 6626-249, Email: g.stadelmann(at)cab.de
Datum: 14.08.2019 - 04:55 Uhr
Sprache: Deutsch
News-ID 1551405
Anzahl Zeichen: 4964
contact information:
Contact person: Guntram Stadelmann
Town:
Karlsruhe
Phone: +49 721 6626-285
Kategorie:
Machinery & Tools
Typ of Press Release: Tradeshow
type of sending: send
Date of sending: 14.08.2019
Anmerkungen:
Diese Pressemitteilung wurde bisher 491 mal aufgerufen.
Die Pressemitteilung mit dem Titel:
"cab product launches at FachPack 2019
"
steht unter der journalistisch-redaktionellen Verantwortung von
cab Produkttechnik GmbH & Co KG (Nachricht senden)
Beachten Sie bitte die weiteren Informationen zum Haftungsauschluß (gemäß TMG - TeleMedianGesetz) und dem Datenschutz (gemäß der DSGVO).
