Strong Triangle, Strong Products

ID: 1550027
recent pressrelease next pressrelease

(PresseBox) - Werkzeugbau Krwhich acts as a solution provider.

Tool manufacturing is one of the industries that has been facing ever increasing demands for some time. With strong customer orientation, the durability and quality of the tools in particular take center stage in the promotion: ?Both narrow tolerances and a long service life for the tools are required in equal measure,? emphasizes Managing Director Hans-Jr many years and thousands of production cycles forms the basis for an economical production process.? Requirements that Werkzeugbau Krlable for our customers,? says Sieve regarding the necessary flexibility. Hand in hand with the customers and their designers, individual high-precision and high-quality injection molding tools are developed in Lohne. Starting with the development and construction of tools, the expertise of the 28-person team extends to testing services, prototype manufacture, and repair and modification work. The program is rounded out by contract manufacturing taken on for companies from the surrounding area.

Broad Market Position

The toolmaker?s client base includes companies from the automotive, construction, and food industries, as well as companies from the electrical, horticultural, or agricultural technology sectors. ?For the automotive industry, which accounts for 70 percent of our order volume, we produce, for example, tools for Isofix holders, covers for toothed belts, interior components, or cylinder head covers,? explains Sieve. These kinds of tools, which are exclusively processed with tool steel, are built up to a size of 1,200

A Huge Difference

With Krch we worked with previously? A few things suggest not: ?For shrinking specifically, we often wanted three or four hundredths but didn?t get it,? states Sieve. ?At the same time, high retaining forces, high vibration dampening, and the durability of the holders were very important to us.? As if on dregarding compression: will it really hold? ?It held. Really well, actually. Even when we went at full tilt,? says Sieve. ?When comparing the shrink-fit and powRgrip holders, the surface in particular won us over. That was a tremendous difference.?

Seamless Use

On the basis of such results, the transition from shrink-fit to powRgrip holders was now consistently driven forward. ?But you need to be aware that this kind of transition has consequences, such as for programming,? emphasizes Sieve. After all, Werkzeugbau Kr an area of tension that must be faced up to,? says Sieve. ?But we would not have done this had we not been completely satisfied with the powRgrip holders.?

Krans the PG colletholders as well as the PG collets, with which solid carbide tools from 0.6 to 16 mm in diameter are held. The special solution PG secuRgrip is also used, which ensures especially high extraction security for tools with Weldon surface. ?Especially with trochoidal milling, secuRgrip irom PG6 to PG32, and therefore from 0.2 to 25.4 mm. The decisive factor: with the slimmer holders, the toolmaker now gets even closer to its components. In any case, Sieve sees the fact that Rego-Fix does not rest during product development as a great advantage: ?The powRgrip?s interference contour is always seen as a shortcoming. But the Swiss are constantly working on improvements here.? The fact that Rego-Fix also always has the toolmaker in mind during these kinds of developments is demonstrated with the example of the PG15 holder, for which a 12 mm collet is now offered. ?With it, companies that produce small parts can work very close to the contour,? says Meyer. ?Rego-Fix thereby takes account of the fact that many parts are becoming ever more complex, thin-walled, and delicate.?

Process Reliability, Accuracy, Flexibility

At Kru should not heat a holder for too long. But you cannot always exclude the fact that this will sometimes happen for 10 or 20 seconds more. Nobody then checks how the structure is subsequently conditioned, how great the concentricity is, or whether a holder is involved that should be withdrawn from circulation. And an hour later on the machine, you have three hundredths in the component.? With the powRgrip system, these uncertainties do not exist. Handling is simple and tool centering is always a given. If you observe the manufacturer?s recommendations, powRgrip works independently of the operator and, alongside process reliability, it ensures a high degree of flexibility. ?Because unlike shrinking, where a holder is required for each diameter,? says Sieve, ?you can use one powRgrip holder with different sleeves.?

Ensure Lasting High Quality

While many users of the Rego-Fix holders quantify a significant increase in tool life, this increase can only be expressed qualitatively at Krefits from this: the effort required to achieve the final quality is significantly lower ? when it comes to shaving and assembly, for example. ?The closer we come to the result, the less shaving or assembly work we have to do afterwards. While we sometimes had to shave tools for three, four days befd by milling ? to the same quality. ?Ultimately, from the tool buyer?s point of view, the conclusion is that you regularly need to buy new holders for shrinking. The powRgrip holders, on the other hand, have almost no limitations in their use.? There is only one figure from the manufacturer here: Rego-Fix guarantees consistent accuracy for the holder beyond 2,000 clamping cycles.

Strong Products, Strong Triangle

For more than twenty years, the partnership between Werkzeugbau Krhis takes us forward as a toolmaker.? The triangle of user, manufacturer, and supplier therefore works. Only recently, another component has been added: the exchange of experiences in Switzerland that brings powRgrip users together who want to get to know the system and manufacturer Rego-Fix even better and improve their production efficiency.

An der Erfolg versprechenden Aufbruchsstimmung der 50er-Jahre steckt sich der Werkzeugmeister Fritz Weber an und gr

Rego-Fix produziert und vertreibt als international ttellung wieder.

More information:
http:// https://

Keywords (optional):

Company information / Profile:

An der Erfolg versprechenden Aufbruchsstimmung der 50er-Jahre steckt sich der Werkzeugmeister Fritz Weber an und gründet das Kleinunternehmen Fritz Weber Feinmechanik und Werkzeugbau. Mit Innovationsgeist und Entschlossenheit erweitert Fritz Weber die Produktpalette kontinuierlich. Im Jahr 1972 optimierte er die bis dahin bekannte E-Spannzange. Er bezeichnete seine Variante als ER-Spannzange mit dem R als Synonym für Rego-Fix. Mit seinen Innovationen beeinflusst Weber massgeblich den Fortgang der Werkzeugspanntechnik und wird weltweit berühmt. Im Jahr 1993 nimmt der Normenausschuss die ER-Spannzange als deutsche Industrienorm (DIN 6499) auf. Danach entwickelt sich die Bezeichnung ER-Spannzange zum Gattungsbegriff für das weltweit meistverkaufte Spannsystem für Werkzeuge.Rego-Fix produziert und vertreibt als international tätiges Familienunternehmen in zweiter Generation mit über 220 Mitarbeiterinnen und Mitarbeitern hoch präzise Werkzeugspannsysteme. Heute zählt das Unternehmen mit Firmensitz im Schweizer Tenniken zu den führenden Herstellern von Werkzeugspannsystemen und geniesst in der metallverarbeitenden Industrie weltweites Ansehen. Denn durch das globale Vertriebspartnernetz, mit Standorten in der Schweiz, den USA und in Asien, ist Rego-Fix optimal aufgestellt sowie auf der ganzen Welt präsent. Mit wegweisenden Produkterfindungen hat sich Rego-Fix vom Kleinunternehmen zum weltweiten Lösungsanbieterfür Werkzeugspannsysteme entwickelt. Jedes Produkt wird unter dem Aspekt der Produktivitätssteigerung entwickelt und mit Schweizer Qualität produziert. Die Rego-Fix-Produkte finden sich insbesondere in den Bereichen Fahrzeug- und Flugzeugbau, Formenbau, Maschinenbau, Medizintechnik und Uhrenherstellung wieder.

PressRelease by


PressContact / Agency:

published by: PresseBox
print pressrelease  send to a friend  

Date: 06/18/2019 - 11:00
Language: English
News-ID 1550027
Character count: 3316
Ansprechpartner: Feedback to about Pressrelease-id:
Stadt: Tenniken


Number of hits: 339


Direct Link to this PressRelease:

We would appreciate a link in your News-, Press- or Partner-Site.

Comments on this PressRelease

All members: 9 406
Register today: 1
Register yesterday: 0
Members online: 0
Guests online: 43

Don't have an account yet? You can create one. As registered user you have some advantages like theme manager, comments configuration and post comments with your name.