Geosoftware with Tools for analyzing and processing of NTv2 files
Tutorial for analysis, conversion and further processing of any NTv2 files in ASCII and binary format with the geospatial software NTv2Tools by KilletSoft.
(firmenpresse) - The NTv2 (National Transformation Version 2) file standard was developed by the "Department of Natural Resources of Canada" in the middle nineties. Using NTv2 grid files it is possible to transform geodata from one coordinate reference system to another with very high accuracy. An NTv2 file contains one or more quasi-rectangular grids with shift values which are defined in the NTv2 headers. NTv2 files are available in ASCII and binary formatted variants. The ASCII variant is generated during the development phase of the NTv2 file, whereby all header and grid entries can be read and edited with a word processing program as plain text. For productive use in geodetic software and in GIS, the much faster binary variant with the same content is used.
The program NTv2Tools provides digital tools for developing and processing NTv2 files in binary and ASCII formats. It analyzes NTv2 files and outputs detailed information on the screen, in graphics files and in text files. The program allows conversions between the binary and ASCII formatted variants of the NTv2 files. Furthermore, areas can be extracted from NTv2 files and swapped out to new NTv2 files. This resolves the known issues with oversized NTv2 files.
The image shows the surface of the NTv2Tools program with the various processing options is shown as a screenshot. Using the program the following processings are possible:
NTv2 files that have been previously equipped with Polygonal Validity Scopes to map a polygonal boundary instead of a quasi-rectangular area in the NTv2 grids are supported by the NTv2Tools program. The Polygonal Validity Scopes realized in the NTv2 files are taken into account for all types of processing and is displayed in all graphical views. Polygonal Validity Scopes can be realized with the program NTv2Poly or with the Geodetic Development Kit GeoDLL by KilletSoft in any NTv2 files.
Analyzing NTv2 files
This tool can analyze NTv2 binary and NTv2 ASCII files. After starting the analysis, the header information of the selected NTv2 file and the information about all grids of the NTv2 file are displayed in a text field. If there were found are any errors in the NTv2 file, they are listed in the text box.
The image on the left shows the upper part of the analysis result of a Canadian NTv2 file used as an example in the following text.
In the header the information about the reference systems are listed, between which can be transformed using this of NTv2 file. Here the semi-axes of the earth ellipsoids matching the reference systems are listed. Also the number of subgrids included in the NTv2 file is listed in the header. Further information contained in the header is necessary for the transformation process.
Each subgrid in turn has its own header. Therein the boundaries of the subgrids and their mesh sizes, as well as the memberships to parent grids and the numbers of available grid meshes are listed. The information of all subgrids with their creation and modification dates is listed in the text field in order of their position in the NTv2 file.
Displaying NTv2 grids and subgrids graphically
This tool displays the outlines of all grids contained in the selected NTv2 grid file as dark red rectangles with hatching in different bright red colors. At the bottom of the window the geographical coordinates at the mouse pointer and the number of grids contained in the NTv2 file are shown.
An NTv2 file contains one or more grids that can be nested next to or above each other. In order to achieve higher accuracies for certain areas, for example in metropolitan areas, NTv2 subgrids with smaller and therefore more precise grid meshes can be arranged on underlying parent grids.
The image shows the 114 grids of an NTv2 file of whole Canada. On four basic grids arranged side by side with large mesh sizes many small subgrids with small mesh sizes are placed. These provide very accurate transformation values for Canadian cities and metropolitan areas.
Displaying normal and polygonal NTv2 activity scopes
The activity scopes of all grids contained in the NTv2 grid file are displayed here in different shades of blue. If the NTv2 file contains Polygonal Validity Scopes, only the grid meshes of the available polygonal areas are displayed, otherwise all grid meshes of the quasi-rectangular grid areas are displayed. Up to a certain threshold the outlines of the grid meshes are highlighted in dark blue color. At the bottom of the window the geographical coordinates at the mouse pointer, the number of grids contained in the NTv2 file and the number of grid meshes are shown. The grid outlines of all grids and subgrids contained in the NTv2 grid file are displayed as red rectangular borders.
Depending on the selected NTv2 file, the building of the graphic may take some time, because a test calculation is performed for each grid mesh. This makes possible to detect defective grid meshes.
The image above shows the 114 activity scopes with more then 862 thousand grid meshes of the NTv2 file across Canada. Here also four basic grids arranged side by side with many small subgrids on top are depicted. The image below shows the same NTv2 file with Polygonal Validity Scopes. The number of effective grid meshes here is reduced to 644 thousand. It can be seen that the activity scope is limited by the borders of Canada. Thus, grid meshes outside the country boundaries can be excluded from calculations in coordinate transformations with a hint about their invalidity.
Converting NTv2 ASCII files to NTv2 Binary files
For the ASCII version of NTv2 files the extension ".gsa" is used, what means "Grid Shift ASCII". The productive usable binary NTv2 files have the extension ".gsb" which stands for "Grid Shift Binary". The ASCII version is used during the development phase of an NTv2 file because all components then can be assembled with a word processor.
This tool converts NTv2 ASCII files (.gsa) to NTv2 binary files (.gsb). After the selection of the NTv2 ASCII file and the definition of a file name for the new NTv2 binary file, the conversion can be started. In the text field the headers of the NTv2 ASCII file and the new NTv2 binary file are displayed.
Converting NTv2 Binary files to NTv2 ASCII files
Sometimes it makes sense to convert a binary file back to an NTv2 ASCII file. This has the advantage that the file then can be read and edited in plain text using a word processing program.
This tool converts NTv2 binary files (.gsb) to NTv2 ASCII files (.gsa). After the selection of the NTv2 binary file and the definition of a file name for the new NTv2 ASCII file, the conversion can be started. In the text field the headers of the NTv2 binary file and the new NTv2 ASCII file are displayed.
Extracting areas from NTv2 files
This tool can be used to extract an area defined by coordinates from a large NTv2 file and place it in a new NTv2 file of smaller size considering all the included NTv2 grids. The coordinate window for the clipping is determined by entering geographical coordinates in the bounding boxes "West", "North", "East" and "South". After selecting the source file in binary format and specifying a filename for the new NTv2 binary file in which the clipping will be saved, the extraction can be started. The following information is displayed in the text field:
The image shows a clipping of the above shown NTv2 file with Polygonal Validity Scopes from Canada. The clipping contains only 15 grids with 411 thousand of originally 644 thousand grid meshes. It can be seen that the Polygonal Validity Scopes are also applied to the smaller subgrids.
Recently NTv2 files with very high accuracy in the centimeter range have been developed, which are suitable for the transformation of geodata of real estate cadastre. The high point density required for this leads to a large number of grid meshes in the NTv2 files. As a result, the file sizes of some NTv2 grid files are enormous. NTv2 files larger than 3 gigabytes are known.
The use of such large NTv2 files is a new trend that developers of geodetic software and GIS could not anticipate. Thus it is not surprising that the NTv2 file BY-KanU.gsb by the German Federal State Bavaria with a lot of software products can not be used. Here, the file size exceeds the by "long integer" addressable file range of about 2,2 gigabytes. Often the grids of the NTv2 file are held in memory due to the calculation speed. However, this is usually not possible with such large grids. These problems can be eliminated only with a great development effort and require a certain changeover time.
This tool allows copying a required area from a large NTv2 file by defined corner coordinates. The separated area is placed in a new NTv2 file that is much smaller than the original. Thereby all subgrids whose area intersects the given area are taken into account. The newly generated NTv2 file now can be used as usual in all geodetic programs and GIS.
If, for example, only the Munich area is needed for coordinate transformation using NTv2, with the tool it can be cut out from the Bavarian NTv2 file BY-KanU.gsb by defining the corner coordinates of the area of Munich. In a test, conducted by KilletSoft, the resulting NTv2 file only had the 120th part of the original file size.
Test NTv2Tools without obligation
Detailed information about the program NTv2Tools with geodetic tools can be found on the website http://www.killetsoft.de/p_ntta_e.htm. There you can also download a free trial version. With the test program you have the opportunity to try all geodetic tools with some included NTv2 files. More options for processing NTv2 files can be found in the descriptions of the products NTv2Poly and GeoDLL on the KilletSoft website.
Author / Writer
Dipl.-Ing. Fred Killet
Escheln 28a
47906 Kempen, Germany
http://www.killetsoft.de/homee.htm
Themen in dieser Pressemitteilung:
ntv2
file
analyzing
processing
developing
analysis
development
binary
ascii
convert
converting
extract
problem
solution
by-kanu
bwta2017
ntv2tools
killetsoft
Unternehmensinformation / Kurzprofil:
Killet Software Ing.-GbR - short: KilletSoft - is a software company, which was established in the year 1991 and offers exclusively geodetic engineer power. The society is divided in the divisions "Geodetic Software", "International Geodata" and "Development Tools for Geoinformatics". The focal trades of the companies supplied by KilletSoft are consulting engineers, GIS developers, Internet marketing, public utilities, logistics, telecommunications, security and public services. We deliver not only to customers in the Federal Republic of Germany, as well we are presented in the European countries, the United States, Canada, Australia and worldwide. Our software is always documented in English and German, usually also in many other languages.
Within the division "Geodetic Software" KilletSoft is focusing on the development of user friendly geodetic applications. By our online presence in the Internet these applications benefit very strongly from the user feedback. We develop applications, in which again and again incorporate the suggestions and desires of the users and thus lead to meaningful updates of the software. Particularly proud we are on the program TRANSDAT, which can accomplish worldwide geodetic coordinate-transformations and datum-shifts between the unbelievably lots of different state-specific systems, and which has reached a high name recognition in the meantime.
KilletSoft distributes "International Geodata" with georeferences, which refer to spatial structure objects with different resolutions. The georeferences are present as coordinates of towns and urban districts, postal code areas, dialing code areas, nature areas, landscapes and climatic zones. In each case they are linked with the suitable hierarchical political units and additional data. The geodata are available for almost all countries of the world. The georeferences are contained as geographical coordinates, UTM coordinates and for the Federal Republic of Germany additionally as Gauss Krueger coordinates. The databases require an intensive data administration to ensure constant topicality. They are at least annually updated.
An important field of activity of KilletSoft is the enhancement and maintenance of the "Development Tools for Geoinformatics" in form of libraries, DLLs and source codes. The development tool GeoDll offers geodetic functions like e.g. different Coordinate Transformations, geodetic datum shifts and distance computations for the integration into own applications, which may be written with any programming language. With the programs NTv2Tools and NTv2Poly we offer the possibility to convert, select and otherwise modify any NTv2 files in various ways as well as to create Polygonal Validity Scopes in NTv2 files. Our development tools are constantly supplemented and improved by user suggestions and desires.
Killet Software Ing.-GbR
Escheln 28a
47906 Kempen (Germany)
Tel: +49 (0)2152 961127
Mobil: +49 (0)1577 5395448
Email: killet(at)killetsoft.de
Killet Software Ing.-GbR
Escheln 28a
47906 Kempen (Germany)
Tel: +49 (0)2152 961127
Mobil: +49 (0)1577 5395448
Email: killet(at)killetsoft.de
Datum: 22.09.2018 - 11:50 Uhr
Sprache: Deutsch
News-ID 1541531
Anzahl Zeichen: 11071
contact information:
Contact person:
Town:
Phone:
Kategorie:
Software
Typ of Press Release: Produktankündigung
type of sending: Veröffentlichung
Date of sending: 22.09.2018
Anmerkungen:
Dear Sir or Madam,
I ask to make the here described feature article available to our readers by publishing it on your media.
Unfortunately, on the portal firmenpresse.de the article can not be displayed completely with all images, text boxes and footnotes.
A ZIP file with the article as MS-WORD file and as PDF file and with all images in different resolutions and graphic formats for the purpose of publication in a print or online medium can be downloaded from the address http://www.killetsoft.de/zip/presse/ws1807_e.zip.
The text and the images of the article are expressly fully available without any restriction for publication. All content may be shortened, supplemented and altered as long as it does not distort the meaning of the content. I declare that KilletSoft is in possession of all rights to the text and images of the article.
If you publish, it would be nice to get an author''s copy.
Diese Pressemitteilung wurde bisher 690 mal aufgerufen.
Die Pressemitteilung mit dem Titel:
"Geosoftware with Tools for analyzing and processing of NTv2 files
"
steht unter der journalistisch-redaktionellen Verantwortung von
Killet Software Ing.-GbR (Nachricht senden)
Beachten Sie bitte die weiteren Informationen zum Haftungsauschluß (gemäß TMG - TeleMedianGesetz) und dem Datenschutz (gemäß der DSGVO).
