Compact and maintenance-free DC UPS systems with SuperCaps as energy storage
Uninterruptible Power Supply
(PresseBox) - With two new DC UPS systems, Bicker Elektronik, Donauwoerth/Germany, offers a particularly innovative and economical solution for the uninterrupted power supply of DC loads, such as motors, sensors, actuators or card readers. The two DC UPS modules UPSIC-1205 (12 VDC / 5A) and UPSIC-2403 (24 VDC / 3A) are equipped with ultracapacitors (so-called SuperCaps) as energy storage which operate according to the principle of double-layer capacitors (EDLC). The DC UPS systems protect against voltage fluctuations, flicker, voltage drops or failures of the supply voltage. Unlike batteries that store energy through a chemical reaction, SuperCaps are based on electrophysical principles and are ready for operation within a very short time. They operate in a wide temperature range and are characterized by their high current-carrying capacity, their power density and their reliability.
Due to the high cycle stability (> 500,000 charging and discharging cycles), the new SuperCap UPS solutions from Bicker Elektronik have a particularly long service life and are practically maintenance-free. This means an increase in long-term availability while minimizing the maintenance effort of the supplied system. Due to the compact dimensions,h register and payment systems, POS / POI as well as mobile applications etc.
In normal operation the intelligent system electronics of the UPSIC relays the input voltage to the output with a minimum deduction of 0.3 V (UPSIC-1205) / 0.2 V (UPSIC-2403) at full load, charges the supercapacitors and monitors the voltage thresholds at the input. If the input voltage falls below the defined threshold, the SuperCap UPS will switch to UPS backup mode within a fraction of a second and provide an uninterrupted and regulated voltage supply at 12VDC resp. 24VDC. The intelligent distribution of the charging currents (power sharing) at the input ensures that the upstream AC/DC power supply has not to be oversized, due to the input power is kept constant and is distributed appropriately to the load and the SuperCap loader. With low load at the output, more energy flows into the SuperCap loader and vice versa.
Equipped with high-quality 3 Volt SuperCaps (4x 100F capacity), the DC UPS modules are fully loaded in a maximum of 60 seconds and are designed for fanless 24/7 continuous operation in the extended temperature range from -20 to +70
The UPSIC UPS modules are equipped with an active polarity protection and an overload protection (switch-off with automatic restart). Three LEDs indicate the supercaps charge status, normal and backup mode. With the help of the integrated relay contact, external units can be switched at "PowerFail". In addition, the SuperCap UPS has a communication interface (RS232, I2C, SMB). Optionally available are matching input and output cables with open ends (PSZ-1036 and PSZ-1037). In addition to the three-year warranty, Bicker Elektronik GmbH guarantees a long-term availability of at least 5 years on the new SuperCap UPS modules. In particular applications with a correspondingly long running time, clients of Bicker Elektronik benefit from optimal investment protection with first-class design-in advice and comprehensive service & support by the German power supply specialists.
UPSIC-1205 / UPSIC-2403
All product characteristics at a glance
Maintenance-free DC UPS systems for 12V or 24V
Ultracapacitors (SuperCaps) as energy storage
Controlled output voltage in UPS mode
High cycle stability> 500,000 loading / discharging
Charging time <60 sec with maximum charging current
Extended temperature range -20...+70
94% efficiency
Intelligent distribution of charging currents (PowerSharing)
Active polarity protection
Power fail signal via relay contact and COM interface RS232 / I2C
Compact design 135 x 79.5 x 35 mm
High-quality components in industrial quality
Suitable for 24/7 continuous operation
Individual design-in consultation
Excellent service & support
Long-term availability at least 5 years
3 years warranty
Bicker UPSIC-1205
Input voltage: 12 VDC (11.6?16 V)
Output UPS operation: 12 VDC
Output normal operation: Vin ? 0.3 V
Output current: 5 A
Direct link to UPSIC-1205:
https://www.bicker.de/index.php/eng/Products/UPS-systems/DC-UPS/UPSIC-1205
Bicker UPSIC-2403
Input voltage: 24 VDC (22.5?30 V)
Output UPS operation: 24 VDC
Output normal operation: Vin ? 0.2 V
Output current: 3 A
Direct link to UPSIC-2403:
https://www.bicker.de/index.php/eng/Products/UPS-systems/DC-UPS/UPSIC-2403
Founded in 1994, Bicker Elektronik GmbH develops, manufactures and distributes power supplies, UPS systems and system components. The company is Tolutions division includes not only power supplies in the classic sense, but also encapsulated power modules, DC/DC converters, DIN rail power supplies and uninterruptible power supplies (UPS) with DC or AC input. The power range of these products is between 3 W and 10,000 W. The product portfolio of Bicker Elektronik is rounded off by suitable industrial mainboards of the manufacturers Fujitsu, ASRock, Perfectron and Avalue as part of the Power+Board program. In addition to the documented lab tests of the power supply + mainboard bundles, the Power+Board services also include personal on-site consulting, product presentation, design-in support, tailor-made system solutions for industrial and medical technology, training and competent technical support. In addition, Bicker Elektronik offers suitable processors, memory, expansion cards and mass storage in industrial quality. This means that all core components can be conveniently accessed from a single source.
Themen in dieser Pressemitteilung:
Unternehmensinformation / Kurzprofil:
Founded in 1994, Bicker Elektronik GmbH develops, manufactures and distributes power supplies, UPS systems and system components. The company is TÜV certified according to ISO 9001: 2015 and focuses with its product portfolio on high-quality power solutions and system components for the areas of industrial automation, medical technology, transport, maritime, communication and information systems as well as infotainment and gaming. The PowerSolutions division includes not only power supplies in the classic sense, but also encapsulated power modules, DC/DC converters, DIN rail power supplies and uninterruptible power supplies (UPS) with DC or AC input. The power range of these products is between 3 W and 10,000 W. The product portfolio of Bicker Elektronik is rounded off by suitable industrial mainboards of the manufacturers Fujitsu, ASRock, Perfectron and Avalue as part of the Power+Board program. In addition to the documented lab tests of the power supply + mainboard bundles, the Power+Board services also include personal on-siteconsulting, product presentation, design-in support, tailor-made system solutions for industrial and medical technology, training and competent technical support. In addition, Bicker Elektronik offers suitable processors, memory, expansion cards and mass storage in industrial quality. This means that all core components can be conveniently accessed from a single source.
Datum: 13.12.2017 - 10:40 Uhr
Sprache: Deutsch
News-ID 1530456
Anzahl Zeichen: 3939
contact information:
Contact person:
Town:
Donauwörth
Phone:
Kategorie:
Research & Development
Typ of Press Release:
type of sending:
Date of sending:
Anmerkungen:
Diese Pressemitteilung wurde bisher 367 mal aufgerufen.
Die Pressemitteilung mit dem Titel:
"Compact and maintenance-free DC UPS systems with SuperCaps as energy storage
"
steht unter der journalistisch-redaktionellen Verantwortung von
Bicker Elektronik GmbH (Nachricht senden)
Beachten Sie bitte die weiteren Informationen zum Haftungsauschluß (gemäß TMG - TeleMedianGesetz) und dem Datenschutz (gemäß der DSGVO).
