E3 Metals Assay Results Confirm Leduc Reef Trend Enriched in Lithium Across a Broader Area Than Originally Tested

ID: 1524972
recent pressrelease next pressrelease

(businesspress24) -
E3 Metals Assay Results Confirm Leduc Reef Trend Enriched in Lithium Across a Broader Area Than Originally Tested

Highlights

- Lithium concentrations obtained from 43 wells across E3s permit area confirm historic results as high as 84.8 mg/L.

- Lithium concentrations obtained from permit areas never before sampled range from 41.4 mg/L to 79.9 mg/L

- These results will allow E3 Metals to develop its first lithium mineral resource, expected in Q4 2017

- Sampling continues across E3s permit area

Vancouver, BC - October 19, 2017 - E3 METALS CORP. (TSX-V: ETMC, FSE: OU7A, OTC: EEMMF) (the Company, E3 or E3 Metals) is pleased to announce that results from the first round of lithium sampling have confirmed historical data ranging from 29.1 mg/L to 84.8 mg/L at actively producing oil and gas wells across a portion of the Companys Petro-Lithium Project in Alberta. E3 Metals sampling program has been completed without the requirement for drilling a well, taking advantage of the existing infrastructure on E3s permit areas. This has resulted in an very cost-effective sampling and assay program. These results will be used to expedite the completion of the Companys first National Instrument 43-101 lithium mineral resource, which is expected to be completed before the end of 2017. E3 Metals received strong collaborative support from oil and gas operators working in the permit area. This has allowed E3 to confirm lithium concentrations across a broad area, some of which has never previously been tested for lithium. E3 Metals results confirm that the lithium concentrations appear to be consistent throughout the massive Leduc reservoir.

A total of 43 samples were collected during the Companys initial sampling program, including 39 from within the Leduc Formation (Woodbend Group) and 4 from within the Nisku Formation (Winterburn Group). Both the Nisku and Leduc Formations are Devonian-aged, with the Nisku occurring between 10-200 metres stratigraphically above the Leduc across the sampling area. Devonian Formation stratigraphy for the area can be found in E3 Metals Technical Report dated May 18, 2017 Geological Introduction to E3 Metals Corp. Clearwater and Exshaw Lithium-Brine Properties in South Central Alberta, authored by Apex Geoscience Ltd., page 30 (available on SEDAR and on the Companys website at e3metalscorp.com). The lithium values from this sampling program range from 29.1 mg/L to 84.8 mg/L from within the Leduc Formation and 41.4 mg/L to 74.6 mg/L from within the Nisku Formation.



The Clearwater area samples average approximately 79.6 m/L from 4 samples. Testing is ongoing over the Clearwater area with more results expected in Q4, 2017. In the Rocky area, 12 Leduc wells were sampled with an average of 56.5 mg/L. 17 Leduc wells were tested in Exshaw West, with an average of 73.6 mg/L, and 4 Nisku wells were tested in this same area with an average of 57.3 mg/L. Six Leduc wells were tested in the Exshaw East area, with an average of 42.6 mg/L. There is a general trend of improved lithium enrichment from east to west in Exshaw. The geographical distribution of results is outlined in Table 1.

Table 1: Lithium Results from E3 Metals First Round of Sampling
E3 Metals Min Li Average Max Li FormationNumber
Project (mg/L) Li (mg/L of
Area ) Wells
(mg/L) Sampled

Clearwater76.2 79.6 84.6 Leduc 4


Exshaw Wes46.7 73.6 84.8 Leduc 17
t

Exshaw Wes41.4 57.3 74.6 Nisku 4
t

Exshaw Eas29.1 42.6 49.9 Leduc 6
t

Rocky 52.2 56.5 61.3 Leduc 12

E3 Metals is continuing to collect samples across the Metallic and Industrial Minerals (MIM) permit area with various operators. The second phase of sampling is expected to continue through Q4 2017 and will enable E3 Metals to complete its initial NI 43-101 mineral resource estimate. The initial resource estimate will cover only a small portion of the Companys permit areas; additional sampling is planned to increase the size of the resource estimate.

http://www.irw-press.at/prcom/images/messages/2017/41161/E3 Metals News Release re Sampling Results Oct 19 2017 FINALPRcom.001.jpeg
Figure 1: E3 Metals Corp. permit areas (red outline) with sampling results outlined in blue (Leduc Reservoir) and green (Nisku Reservoir).

Update: E3s Alberta Petro-Lithium Project

Petro-Lithium are massive oil and gas reservoirs enriched with lithium in the brine formation water. When the oil is pumped out of these maturing reservoirs by oil and gas operators, ~98% of the fluid that comes with it is water and must be separated from the oil in a separation facility. Not all oil and gas reservoirs contain lithium, which distinguishes E3s 1.4M acres of permits over the prolific Leduc Reservoir. E3s permit area has now been tested and shown to contain significant concentrations of lithium in sampled brines. The rapidly growing electric car and power storage industries have increased lithium demand in a supply-constrained growing industry, creating an opportunity for Petro-Lithium to be an important source to the supply chain in the future.

E3 has demonstrated the ability to leverage the existing oil and gas fields infrastructure to reduce the exploration costs and development risks compared to conventional exploration for lithium in salars or hard rock deposits. No new drilling and infrastructure building is required for current and proposed exploration. With the trend of decreasing oil and gas production in the area, E3 may be able to acquire infrastructure for minimal cost. While lithium concentrations found in Petro-Lithium projects are generally at the lower end of the current lithium industry production grade curve (around 80 mg/L) it is important to understand that the Leduc Reservoir has the capacity to contain tens of billions of liters of lithium bearing brines with extremely high flow rates. It is estimated that one well can produce up to 20,000,000 liters of water per day from the reservoir. These high brine flow rates combined with new direct lithium extraction technologies currently under development by various entities has potential to create a new source of lithium to supply the expanding lithium industry.

About E3 Metals

E3 Metals is a publically listed company in the emerging Petro-Lithium space (TSXV: ETMC). E3 has brought together an experienced team that has secured the lithium (and other mineral) rights to over 570,000 hectares (~1.4 million acres) in Alberta covering the prolific Leduc Reservoir. Over 60 years of reservoir data from the oil and gas operators is readily available, and E3 has acquired this data to target its own sampling of the brines from existing wells. It is expected that repurposing existing infrastructure and historical data will allow E3 to cost effectively and rapidly define a lithium mineral resource prepared in accordance with NI 43-101. E3s focus is to develop a sizable lithium resource that can be exploited by direct lithium extraction technologies currently under development by industry leaders. More information about E3 Metals can be found our website by visiting: www.e3metalscorp.com.

ON BEHALF OF THE BOARD OF DIRECTORS,
Chris Doornbos, President & CEO

CONTACT INFORMATION
E3 METALS CORP.
205 - 227 10th St NW
Calgary, AB T2N 1V5
+1 (877) 319-7634
info(at)e3metalscorp.com
e3metalscorp.com


Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Chris Doornbos (P.Geo), CEO and Director of E3 Metals Corp., is a Qualified Person a as defined by National Instrument 43-101 and has read and approved the technical information contained in this announcement.

This news release includes certain forward-looking statements concerning the development of the Companys Alberta Petro-Lithium Project, the Companys intention to establish a mineral resource estimate in respect of its Alberta Petro-Lithium Project and the results thereof, the reliability or accuracy of sampling results, the anticipated results of future sampling programs, the future performance of our business, its operations and its financial performance and condition, as well as managements objectives, strategies, beliefs and intentions. Forward-looking statements are frequently identified by such words as may, will, plan, expect, anticipate, estimate, intend and similar words referring to future events and results. Forward-looking statements are based on the current opinions and expectations of management. All forward-looking information is inherently uncertain and subject to a variety of assumptions, risks and uncertainties, including the speculative nature of mineral exploration and development, fluctuating commodity prices, results of current and future testing, competitive risks and the availability of financing, as described in more detail in our recent securities filings available at www.sedar.com. Actual events or results may differ materially from those projected in the forward looking statements and we caution against placing undue reliance thereon. We assume no obligation to revise or update these forward looking statements except as required by applicable law.




More information:
http:// http://www.vermes.com/en/ http:// http://www.seanschurmann.com http://www.seanschurmann.com



Keywords (optional):



Company information / Profile:

PressRelease by

Requests:





PressContact / Agency:



published by: irw
print pressrelease  send to a friend  

Date: 10/19/2017 - 03:13
Language: English
News-ID 1524972
Character count: 7400
Kontakt-Informationen:
Firma: E3 Metals Corp.
Ansprechpartner: Feedback to businesspress24.com about Pressrelease-id:
Stadt: Wien
Telefon:

Meldungsart:
Versandart:
Freigabedatum:
Comments:



Number of hits: 245

Linking-Tips:



Direct Link to this PressRelease:






We would appreciate a link in your News-, Press- or Partner-Site.

Comments on this PressRelease






All members: 9 438
Register today: 0
Register yesterday: 0
Members online: 0
Guests online: 79


Don't have an account yet? You can create one. As registered user you have some advantages like theme manager, comments configuration and post comments with your name.