Ceramic Polymer: Internal coating of a huge tank for brewery effluents in Laško, Slovenia with PROGUARD CN 200
Ceramic Polymer GmbH manufactures protective coatings for highest product requirements. For application within the field of wastewater the coatings must fulfill high resistances against chemicals and abrasion. The solvent-free 1-layer-systems provide cost saving repair and new coating due to easy and fast application.
(firmenpresse) - The large wastewater tank of a well-established brewery in Laško showed heavy corrosion damages. Extreme rust perforation occurred in its upper third; the area with fluctuating water levels. The sewage water contains an elevated oxygen level within this zone. Thus, this part of the tank is most susceptible to corrosion.
Brewery effluents have high pH values and an extensive chemical aggressiveness due to organic substances such as yeast, starch or sugar compounds. Moreover, plenty of chemical detergents are fed into the sewage of breweries.
The wastewater tank in Laško was completely and extensively renovated. For instance, only assembling the scaffold takes approximately 2 weeks. The German company ISDW used for the new coating of the tank the product system PROGUARD CN 200.
Technical Details
Project: Restoration of huge tank for brewery effluents
Height of the tank: 18 m
Diameter: 22 m
Coated area: 1000 m2 wall area
Coating product: PROGUARD CN 200
Application of the coating: ISDW GmbH, DE-Mittenwalde/Germany
The Product Advantages of PROGUARD CN 200
•excellent chemical resistance
•high abrasion resistance
•temperature stability up to 130 °C (266 °F) for wet storage substances
•long-term corrosion protection for all kinds of effluents
•1-layer-system
•short curing times
•solvent-free
Themen in dieser Pressemitteilung:
Unternehmensinformation / Kurzprofil:
The Ceramic Polymer GmbH produces high-quality, solvent-free protective coatings for different kinds of industries. Due to the integration of microscopic ceramic and other special particles, coating systems with outstanding physical properties such as excellent chemical resistances, high temperature stabilities and extreme abrasion resistances are generated.
The Ceramic Polymer coatings are applied directly on the blasted substrate (e.g. steel, stainless steel, concrete) without the previous use of a primer. In this way extreme adhesion is achieved.
The scopes of the Ceramic Polymer coatings are for instance all kinds of storage tanks, pipelines or process vessels for the oil & gas industry as well as different maritime constructions, waste water or drinking water applications.
Ceramic Polymer GmbH
Stephanie Wuensch
Daimlerring 9
DE-32289 Roedinghausen / Germany
+49 (0)5223-96276-0
swu(at)ceramic-polymer.de
www.ceramic-polymer.de
Ceramic Polymer GmbH
Stephanie Wuensch
Daimlerring 9
DE-32289 Roedinghausen / Germany
+49 (0)5223-96276-0
swu(at)ceramic-polymer.de
www.ceramic-polymer.de
Datum: 25.11.2016 - 03:47 Uhr
Sprache: Deutsch
News-ID 1472056
Anzahl Zeichen: 1836
contact information:
Contact person: Stephanie Wuensch
Town:
Roedinghausen
Phone: +49 (0)5223-96276-23
Kategorie:
Commodity Chemicals
Typ of Press Release: Produktinformation
type of sending: Veröffentlichung
Date of sending: 25.11.2016
Anmerkungen:
Diese Pressemitteilung wurde bisher 709 mal aufgerufen.
Die Pressemitteilung mit dem Titel:
"Ceramic Polymer: Internal coating of a huge tank for brewery effluents in Laško, Slovenia with PROGUARD CN 200
"
steht unter der journalistisch-redaktionellen Verantwortung von
Ceramic Polymer GmbH (Nachricht senden)
Beachten Sie bitte die weiteren Informationen zum Haftungsauschluß (gemäß TMG - TeleMedianGesetz) und dem Datenschutz (gemäß der DSGVO).
