Lantech IEC-0101FT-DNV

(PresseBox) - .
- 10/100TX to 100FX Industrial Converter
- DNV Type Approved for Ships, Craft and Off-shore Platforms
- UL Class I Division II for Group A,B,C and D hazardous location
- Unique DIP switches to set the operation mode
- Built-in LLF and LFP technology
- Wide-range redundant power with polarity reverse protection
The Lantech IEC-0101FT-DNV Industrial Converter is a slim type Industrial converter which has a unique DIP switch to adjust 100M duplex mode and LLF (Link Loss Forwarding) function.
Through the DIP switch, you can also set power alarm and pure converter mode. Featured with LLF function, the Lantech IEC-0101FT-DNV is able to auto-cut off connection if one end of connection is down. The built-in LFP (Link Fault Pass-Through) scheme is to cut off Fiber TX or RX when either one has lost connection then trigger LLF to cut off all connection. Smart LLF and LFP functions alert central side switch immediate remedy action when connection is lost.
The Lantech IEC-0101FT-DNV is designed to meet the demands of industrial environments, comes packaged in a robust IP 30 housing and has been tested extensively to meet Industrial EMI and EMC standards. With UL Class I Division II approval, IEC-0010FT can be implemented in hazardous or explosive condition without accelerating the potential damage. It is the best choice to be installed in inflammable environment where the liquid, gas and vapor etc might present the hazardous condition which generally to be find in mining, oil & gas, chemical, processing automation areas.
The Lantech IEC-0101FT-DNV meets with the most critical test criteria in DNV Type test directives consisting of MED (Marine Equipment Directive), EMC (Electromagnetic Compatibility Directive) and LVD (Low Voltage Directive) in which vibration, high voltage, compass safe distance, salt mist tests, humidity etc are conducted to ensure the switch sustaining the harsh on-board environments often founded in Ships, Crafts and Offshore platforms.

Themen in dieser Pressemitteilung:


Unternehmensinformation / Kurzprofil:
Leseranfragen:
PresseKontakt / Agentur:
Bereitgestellt von Benutzer: PresseBox
Datum: 17.06.2015 - 10:08 Uhr
Sprache: Deutsch
News-ID 1366694
Anzahl Zeichen: 0

contact information:
Contact person:
Town:

Klingenberg

Phone:

Kategorie:

Hazadous Materials Management

Anmerkungen:


Diese Pressemitteilung wurde bisher 314 mal aufgerufen.


Die Pressemitteilung mit dem Titel:
"Lantech IEC-0101FT-DNV
"
steht unter der journalistisch-redaktionellen Verantwortung von

Lantech Communications Europe GmbH (Nachricht senden)

Beachten Sie bitte die weiteren Informationen zum Haftungsauschluß (gemäß TMG - TeleMedianGesetz) und dem Datenschutz (gemäß der DSGVO).

CRA - Lantech implemented Cybersecurity ...

The EU has adopted?Regulation (EU) 2024/2847 (Cyber Resilience Act or CRA), which introduces new cybersecurity requirements for connected products, software and their remote data processing solutions. The CRA entered into force on December 10, 2024, ...

LantechView??Advanced Network Management (NMS) Made Easy ...

LantechView is the innovative network management software from Lantech, designed to deliver maximum efficiency and reliability. With its intuitive graphical user interface and well-structured dashboard, navigating complex network infrastructures beco ...

Lantech T(P)GS-0008D ...

Discover our newest Lantech T(P)GS-0008D ?? the robust Ethernet switch that elevates your industrial needs to a new level! With 8 ports for 10/100/1000 Base-T and M12 connectors, this unmanaged switch offers IP67/IP54 protection, standing strong agai ...

Alle Meldungen von Lantech Communications Europe GmbH