Fujitsu adds high-performance capacitive touch functionality to its FM3 Family of ARM® Cortex?-M3 based Microcontrollers
Fujitsu FM3touch enables state-of-the-art capacitive touch Human-Machine-Interfaces for industrial, home appliance and medical applications
(firmenpresse) - Langen, Germany - February 28, 2012 - Fujitsu Semiconductor Europe (FSEU) today unveils high-performance capacitive touch functionality for its FM3 Family of ARM® Cortex?-M3 based microcontrollers. The FM3touch library delivers the easy integration of capacitive touch functionality in state-of-the-art Human-Machine-Interfaces (HMI) for a wide range of industrial, home appliance and medical applications. The new technology, developed by FSEU in Europe, combines high sensitivity with low system load, and supports developers in creating flexible and tailored HMI solutions.
FM3 "Right-Sized" Solutions
Since they first launched at the end of 2010, Fujitsu"s FM3 family has developed into an array of more than 300 compelling microcontroller products. With advanced peripherals, including flexible timers to control various types of inverters, serial communication interfaces ranging from a simple UART, over CAN, USB and up to dual-channel Ethernet, high-performance Flash memory and many more, the FM3 family addresses a wide range of industrial, home appliance and medical applications.
Many such applications require a Human-Machine-Interface, and increasingly require rich functionality as well as aesthetic design. Capacitive touch control has become one of the most popular technologies to fulfill the requirements of modern HMI implementations. The FM3touch capacitive touch library allows easy integration of capacitive touch functionalities such as buttons, sliders, scroll wheels and even touch pads, with a minimum of additional hardware and software effort.
Maximum flexibility
Fujitsu"s FM3touch takes full advantage of an advanced 12-bit ADC, present in all FM3 devices, enabling high-speed acquisition, high sensitivity and low system load. Since all FM3 devices offer two or even three independent ADC units, maximum flexibility and resource availability is achieved, fulfilling all application requirements. Configurable environmental drift calibration assures stable operation, and a flexible sensor grouping allows numerous layout options for sliders, buttons, scroll wheels and touch pads. In addition to a simple on / off status, the touch signal strength of each sensor can be read out, and special notification functions can be triggered upon events such as button press / release and position change of a slider, among others.
FM3touch uses an ADC-based, patent-pending capacitive sensing algorithm to reach a high sensitivity of only a few femto-Farad, using one pin-per-touch input channel without the need for external components. Together with the wide variety of available FM3 products from 48 up to 176 pins, different Flash sizes and combinations of advanced peripherals, the right-sized device can be chosen for every application.
Easy deployment
A graphical PC tool can be used to monitor the touch data and to facilitate the setup of different parameters. It can be easily connected to the target system by a serial connection, so that parameter fine-tuning can be performed directly at the end application.
Themen in dieser Pressemitteilung:
fujitsu
fseu
semiconductor
microcontroller
industrial
medical
home-appliance
performance
capacitive-touch
touchscreen
arm-cortex
fm3
fm3touch
human
machine
interface
hmi
Unternehmensinformation / Kurzprofil:
About Fujitsu Semiconductor Europe (FSEU)
Fujitsu Semiconductor Europe (FSEU) is a major supplier of 'right-sized' advanced semiconductor solutions, serving the automotive, industrial, communications and home entertainment markets. FSEU's overall strategy is firmly driven by its customers' demands, with the aim of becoming an integral value-added link in the complete supply chain. Sales teams are based in regional offices in Langen near Frankfurt, Munich, Maidenhead near London, Paris, Milan, Budapest and Istanbul, providing local technical sales and applications support. Engineers from Fujitsu's European-based design centres and research and development facilities, dedicated to analogue and mixed-signal technology, advanced packaging, microcontrollers, graphics controllers, multimedia ICs, ASICs and embedded software, work closely with marketing and sales teams to satisfy customers' systems development requirements.
Corporate website: http://emea.fujitsu.com/semiconductor
Newsletter: http://emea.fujitsu.com/newsletter
RSS: http://emea.fujitsu.com/rss
Twitter: http://emea.fujitsu.com/twitter
Google+: http://emea.fujitsu.com/google-plus
Facebook: http://emea.fujitsu.com/facebook
YouTube: http://emea.fujitsu.com/youtube
Scribd: http://www.scribd.com/fujitsusemi
Flickr: http://emea.fujitsu.com/flickr
Hotwire
Florian Hohenauer
Briennerstraße 11
80333 München
florian.hohenauer(at)hotwirepr.com
+49 (0)89 8099 1113-3
http://www.hotwirepr.com
Datum: 28.02.2012 - 05:31 Uhr
Sprache: Deutsch
News-ID 1087402
Anzahl Zeichen: 0
contact information:
Contact person: Rainer Reitz
Town:
Langen
Phone: 06103-6900
Kategorie:
Research & Development
Anmerkungen:
Diese Pressemitteilung wurde bisher 236 mal aufgerufen.
Die Pressemitteilung mit dem Titel:
"Fujitsu adds high-performance capacitive touch functionality to its FM3 Family of ARM® Cortex?-M3 based Microcontrollers
"
steht unter der journalistisch-redaktionellen Verantwortung von
Fujitsu Semiconductor Europe GmbH (Nachricht senden)
Beachten Sie bitte die weiteren Informationen zum Haftungsauschluß (gemäß TMG - TeleMedianGesetz) und dem Datenschutz (gemäß der DSGVO).
