VPG Releases Hermetically Sealed Precision Resistor Networks With Screen/Test Flow in Compliance With EEE-INST-002 and MIL-PRF-83401
(firmenpresse) - MALVERN, PA -- (Marketwire) -- 02/27/12 -- Vishay Precision Group, Inc. (NYSE: VPG) today announced that its Vishay Foil Resistors division (VFR) has released new hermetically sealed precision resistor network devices (PRND) with a screen/test flow in compliance with EEE-INST-002 (Tables 2A and 3A, Film/Foil, Level 1) and MIL-PRF-83401. For high-reliability military and aerospace applications such as satellites, space rovers, and deep-space probes, the PRNDs provide low absolute TCR of 2 ppm/°C typical from -55°C to +125°C, +25°C ref.; load-life stability to 0.05% typical; and a load-life ratio stability of 0.02% typical at +70°C for 2,000 hours at rated power.
Custom configured to requested circuit schematics and specifications, VFR's EEE-INST-002-compliant PRNDs are hermetically sealed networks consisting of multiple Bulk Metal® Foil hybrid chip resistors connected by gold-wire bonding inside ceramic packages. Utilizing Bulk Metal Foil technology, PRNDs assure extraordinary performance due to their fundamentally low TCR, excellent tolerance matching and tracking, and very small drifts with load over time. In fact, typical performance for PRNDs ranges up to 15 times better than the requirements of the MIL-PRF-83401 spec.
The combination of the PRNDs' ceramic package -- which has the advantage of electrical isolation on the underside and high heat dissipation capability -- hermetic sealing, and the arrangement of the chips within the package, helps preserve uniform conditions inside it for maximum environmental protection. The result is improved load life stability and better performance for high-temperature and high-moisture environments.
Offered in dual-in-line (DIP), flatpack, gull wing, and leadless chip carrier (LCC) package configurations, the PRNDs feature a wide resistance range from 5 ohms per chip, with lower and higher values available with tolerance matching to 0.005%. Any resistance value within this range is available at any tolerance with no additional cost or lead time effect. The devices provide a power rating to 1.4 W per package (150 mW per resistor) at an ambient temperature of +70°C.
The resistor networks feature a rise time of 1.0 ns with effectively no ringing, a thermal stabilization time of less than 1 s (nominal value achieved within 10 ppm of steady state value), current noise of 0.010 microvolts rms per volt of applied voltage (less than -40 dB), a voltage coefficient of less than 0.1 ppm/V, and a shelf-life stability of 2 ppm typical after at least six years. Offered with gold-plated terminations, the devices provide a non-inductive (less than 0.08 microhenries), non-capacitive design.
VFR's hermetic networks are based on fabrication from a standing inventory of packages and resistor chips. This permits quick delivery of prototypes because there are no masks to design or trial processing to be made. Further, it allows a large combination of values, tolerances, and circuits. The chip and wire approach allows for standard or custom schematics with no engineering or setup charges, and with no minimum quantities required.
Samples and production quantities of the EEE-INST-002-compliant PRNDs are available now, with lead times of eight weeks for standard orders.
Further information about the PRNDs and other Vishay Foil Resistors products is available at . Follow Vishay Foil Resistors at .
Vishay Foil Resistors is a division of Vishay Precision Group, producing the most precise and stable resistors available. The portfolio comprises products in a variety of resistor and package configurations to meet the needs of a wide range of applications: discrete resistors and resistor networks in surface mount and through-hole (fixed-lead) configurations; customized chip resistor networks; precision trimming potentiometers; and discrete chips for use in hybrid circuits. The foil resistors and current sensors are used in applications requiring a high degree of precision and stability, such as in medical testing equipment, high performance audio equipment, precision measuring instruments, aerospace, and military applications.
Vishay Precision Group (VPG) produces sensors based on precision resistive foil technology, and sensor-based systems. It provides vertically integrated products and solutions for multiple growing markets in the areas of stress, force, weight, pressure and current measurements. As a spin-off from Vishay Intertechnology, VPG's decades-long track record encompasses innovations in precision foil resistors, current sensors, and strain gages, which have served as a foundation for VPG's more recent expansion into strain gage instrumentation, load cells and transducers, weighing modules and complete systems for process control and on-board weighing. Vishay Precision Group may be found on the Internet at .
(PRND)
Rae Morrow
Wall Street Communications
Tel: +1 775-626-7722
Email:
Marti Spalding
Director, Global MarCom
Tel: +1 919-374-5515
Email:
Themen in dieser Pressemitteilung:
Unternehmensinformation / Kurzprofil:
Datum: 27.02.2012 - 10:00 Uhr
Sprache: Deutsch
News-ID 1087147
Anzahl Zeichen: 0
contact information:
Contact person:
Town:
MALVERN, PA
Phone:
Kategorie:
Electronics & Communications
Anmerkungen:
Diese Pressemitteilung wurde bisher 189 mal aufgerufen.
Die Pressemitteilung mit dem Titel:
"VPG Releases Hermetically Sealed Precision Resistor Networks With Screen/Test Flow in Compliance With EEE-INST-002 and MIL-PRF-83401
"
steht unter der journalistisch-redaktionellen Verantwortung von
Vishay Precision Group (Nachricht senden)
Beachten Sie bitte die weiteren Informationen zum Haftungsauschluß (gemäß TMG - TeleMedianGesetz) und dem Datenschutz (gemäß der DSGVO).
