Suction of Release Agents of Hot Forming Presses
(firmenpresse) - Description of project & system:
On the 1st expansion level, an LTA air filter type AC 8002 with a suction output of approx. 10,000 m³ sucks the release agent vapors of 3 presses The aerosols are separated from the contaminated air and stick to the collector surface or condense partially and are drained towards the bottom. Once per day, the offline cleaning cycle is started. For this purpose, the system is switched off and flushed with cleaning oil through nozzle fittings integrated in the filter. This pre-cleaning process takes about 35 min. After that, the system can be operated again right away.
The contaminated oil is cleaned in a centrifuge in the course of the next few hours and is then again available for the next cleaning cycle. The residues of the release agent are collected in a container and may then be disposed of.
The advantage of this system - next to the fewer service staff required - mainly lies in the unlimited usability of the cleaning oil. Only the part lost through volatilization must be replaced. In contrast to this, the water used must be replace in regular intervals in case of conventional wet cleaning systems. Besides negative environmental aspects, this also causes high consequential costs for the disposal of the water.
The solution offered by LTA for this project comprises the cleanable large filters type AC 8002 (1st expansion level, approx. 10,000 m³ effective suction output) or AC 16002 (2nd expansion level, approx. 20,000 m³ effective suction output) with attachment accessories, one spraying system for the online cleaning of the filters, one cleaning system, the piping + exhaust piping as well as the complete assembly, setting and commissioning of the turn-key system.
Themen in dieser Pressemitteilung:
airfilter
suction
devices
electrofilter
emulsionmist
filter
oilmist
filter
dustfilter
chipfilter
welding
fume
filter
solder
smoke
filter
safety
technics
fire
protection
machine
tools
Unternehmensinformation / Kurzprofil:
LTA Lufttechnik is a renowned partner for complete solutions in air technology. The company projects, builds and delivers air filter and fire protection systems for trade and industry. For over 30 years, LTA has been researching, developing and manufacturing aerosol separation products. The electrostatic separation method is eco-friendly and has continuously been further developed and improved.
Portfolio:
- Separation and cleaning of oil- and emulsion mist at machine tools
- Gathering and separation of sold-, weld- and oil smoke
- Dust- and chip suction
- Special applications, for example suction of plastic-, silicone- & releasing agent vapours
- Explosion- and fire protection at oil-cooled machine tools
- Suction at source, group suction, centralized air suction, hall air cleaning
- High-duty filter units, ventilation, heat recovery
- 24/7 Service with 15 support points in 11 countries
Available in independant or central suction plants, our equipments are used for exhaust air, air supply or hall air suction, purification. The plants are mounted as initial equipments on machines of well-known automotive manufacturers or as retrofits on already available machines of small and medium size enterprises.
Philipp Fehrenbach
sales office-duty and marketing-manager
Tel.: +49/7838/84-331 (Fax: -308)
Email: philipp.fehrenbach(at)lta.de
Datum: 10.05.2010 - 07:27 Uhr
Sprache: Deutsch
News-ID 1014354
Anzahl Zeichen: 0
contact information:
Contact person:
Town:
Phone:
Kategorie:
Machinery & Tools
Anmerkungen:
Belegexemplar erwünscht
Diese Pressemitteilung wurde bisher 201 mal aufgerufen.
Die Pressemitteilung mit dem Titel:
"Suction of Release Agents of Hot Forming Presses
"
steht unter der journalistisch-redaktionellen Verantwortung von
LTA Lufttechnik GmbH (Nachricht senden)
Beachten Sie bitte die weiteren Informationen zum Haftungsauschluß (gemäß TMG - TeleMedianGesetz) und dem Datenschutz (gemäß der DSGVO).
