Romaco at Pharmintech 2010: Synthesis of ergonomics and efficiency
The Italian packaging brands of the Romaco Group are the focus of Pharmintech 2010 in Bologna. The packaging specialist will present the continuous and intermittent motion cartoners by Promatic. The Unipac U 2060 tube filler and the Macofar VF 24 aseptic filling machine serve the primary packaging of pourable products and pharmaceutical liquids.
(firmenpresse) - The PC 4000 and P 91 horizontal motion cartoners of the Italian Romaco brand Promatic stand out due to their ergonomic construction and their consistent balcony design. The unique machine concept of the Promatic cartoners enables absolutely secure processes in the packaging of pharmaceuticals and cosmetics in foldable boxes. Because of its light-weight construction, the anterior machine area does not require additional supports. All chains and mechanical drives were replaced by plastic-coated toothed belts with mounted retention fingers. By using the Venturi system instead of vacuum pumps, the noise pollution for the operators is decisively reduced.
The continuous motion cartoners of the Promatic PC 4000 series achieve a maximum output of up to 420 foldable cartons per minute. Numerous servo systems assure smooth and accurate processing. Thus the cartons to be filled are opened with an active movement, before the product is inserted. With a packaging speed of up to 140 foldable cartons per minute, the intermittent motion cartoners in the Promatic P 91S series nearly reach the performance level of continually functioning machines. The Promatic cartoners are easy to operate; format and packaging changes can be performed by responsible shift personnel. The completely automatic packaging processes are reliably controlled and monitored with the control panel.
Filling of liquid and semi-solid pharmaceuticals and cosmetics
The compact Unipac U 2060 tube filling machine, with a surface area of less than one-and-a-half square meters, is equipped with eight stations. Depending on the viscosity and density of the product, a maximum output of up to 70 tubes per minute can be achieved. The unit is able to process aluminum or plastic tubes in sizes from 60 to 270 millimeters. After filling, the tubes are crimped or sealed in several subsequent stations. A special system assures the exact alignment of the tubes in the transportation stations, thereby providing correct positioning of the graphic design during sealing. This fully automatic alignment occurs from below, so that no rotating machine components come into contact with the open tube ends. In this way, the Unipac U 2060 assures absolutely secure processes in the filling of pharmaceuticals.
The conception of the Romaco Macofar VF 24 aseptic liquid filling machine also focuses on product safety. The unique slim design of the unit for filling pharmaceutical liquids into vials offers the greatest possible protection from undesired particle formation. The horizontal distance between the input tubes and the front side of the machine is less than 600 millimeters. Turbulences around the open vials are therefore reduced to a minimum. The Macofar VF 24 fulfills all of the guidelines of “Good Manufacturing Practices” (GMP) for sterile filling processes in clean room “Grade A”. The unit processes biopharmaceuticals as well as freeze dried products at a maximum output of 24,000 vials per hour.
These products can be seen from May 12 to 14, 2010 at Pharmintech in Bologna, Pavilion 22, Booth A3.
Themen in dieser Pressemitteilung:
Unternehmensinformation / Kurzprofil:
Romaco Group
Romaco is one of the world’s leading suppliers of machines and installations for process engineering and packaging. Subdivided into the areas of Processing and Packaging, the company develops technical solutions for the pharmaceutical, cosmetic and food industries. The Romaco Group, with its headquarters in Karlsruhe (Germany), is part of the listed US group Robbins & Myers Inc. (Dayton, Ohio). Romaco is represented in four European locations in Germany, Switzerland and Italy through a total of seven brands. Bosspak, Macofar, Noack, Promatic, Siebler and Unipac represent the Packaging business area; the Processing sector is covered by the FrymaKoruma brand. Currently, more than 50,000 Romaco machines are in use in over 130 countries. About 500 employees look after and supply more than 100 markets around the world.
Egbert Heid
Group Marketing Director
Romaco Group
Am Heegwald 11
D-76227 Karlsruhe
Germany
Tel. +49 (0) 7631 7067 0
Fax +49 (0) 7631 7067 29
Mail egbert.heid(at)romaco.com
Susanne Silva
PR Consultant
Ariadne MedienAgentur
Daimlerstraße 23
D-76185 Karlsruhe
Germany
Tel. +49 (0) 721 4647 29 1 00
Fax +49 (0) 721 4647 29 0 99
Mail scsilva(at)ariadne.de
Datum: 01.04.2010 - 11:08 Uhr
Sprache: Deutsch
News-ID 1012382
Anzahl Zeichen: 0
contact information:
Contact person: Susanne Silva
Town:
Karlsruhe
Phone: +49 (0) 721 4647 29 100
Kategorie:
Healthcare & Medical
Anmerkungen:
Diese Pressemitteilung wurde bisher 183 mal aufgerufen.
Die Pressemitteilung mit dem Titel:
"Romaco at Pharmintech 2010: Synthesis of ergonomics and efficiency
"
steht unter der journalistisch-redaktionellen Verantwortung von
Ariadne MedienAgentur (Nachricht senden)
Beachten Sie bitte die weiteren Informationen zum Haftungsauschluß (gemäß TMG - TeleMedianGesetz) und dem Datenschutz (gemäß der DSGVO).
