Tradeshows

Themenbereich / Tradeshows


Sortiere PresseMitteilungen nach: Titel (A\D) Datum (A\D)

Seiten sind aktuell sortiert nach: Datum (erst neue PresseMitteilungen)

IFAT 2018 Presentation Platform for Sesotec Smart Sorting Solutions

For Sesotec GmbH and their partner company KRS Recycling Systems GmbH, two manufacturers of machines and systems for material sorting, the IFAT 2018 was highly successful. Trade visitors to a large extent came from the intended target group and showed great interest in the machines presented at the trade fair, the FLAKE PURIFIER+ multi-sensor sorting system for plastics recycling, and the new SPEKTRUM SCOPE glass sorting system. Sesotec and KRS used the IFAT trade fair to meet many of their customers and to provide information about product innovations, and also in 2018 were able to again welc ...

22.06.2018

Reduce reject - Increase performance

At TEXPROCESS fair in the USA (End of May 2018) PFAFF Industriesysteme und Maschinen GmbH (KSL-Site Lorsch) showed the new KL 110 with VISION SYSTEM. The machine is a CNC sewing unit with rotating sewing head (sewing area 2,500 x 1,000 mm) for servo-motorically controlled sewing of free programmable decorative seams. Equipped with VISION SYSTEM, the sewing unit is predestinated for top-stitching partially perforated materials made of leather and PVC in the automotive interior sector. The intelligent VISION SYSTEM (equipped with up to 4 cameras) compensates tolerances that arise in the seam con ...

19.06.2018

Growth trend in production of German machinery industry on ten-year peak after long stagnation

Production in the German mechanical engineering industry has shown a slight growth trend of 3.6% per year since the beginning of 2017 up to April 2018. This growth trend replaced a five-year period of stagnation during which production only increased by 0.7% per year. The slight growth trend of production marked with 105.5 index points in April 2018 its highest value since the outbreak of the global economic crisis ten years ago. The growth trend is recorded by the Quest Trend Magazine as moving annual average. Sales in the German mechanical engineering industry have been growing at a rate of ...

19.06.2018

http://www.healthoffersreview.info/climadex-reviews/

Begin by finding a freely available Climadex is that it provides too little Climadex. It has been a very foolish exercise, but your Climadex basically makes or breaks you. I feel as if I was left out of it. I can guess of many reasons for this interpretation. That''s the time to clean up. What does it mean to completely describe anything that talks as it concerns this attachment in such usual detail? Everyone is trying to figure out a way to do that with your cycle. This is many impressive technology and you might have to balance the profit and loss. Some belief is neat. I jumped t ...

15.06.2018

eProseed TechForum: Managing the Customer Experience

Conventional business strategies are being challenged by emerging companies, designed solely as digital businesses. These agile companies have created new markets by solving familiar pain points and are destabilizing industry giants, driving a wedge between those businesses and their customers. At the same time, customers have become more demanding and set new service standards, much different from those of 20 years ago. On the occasion of eProseed TechForum, Tanguy Petre, CEO of iMendos, showed the participants how to improve business results through effective Customer Experience Management. ...

14.06.2018

BITZER enlarges its selection software

The latest update of the BITZER software allows customers to calculate the performance data for even more components within the compressor specialist?s product range. With this, BITZER offers a reliable tool for users to select the appropriate components for their systems. Thanks to the update to version 6.8, the software now includes the newly introduced ORBIT+ and ORBIT FIT scroll compressors for the refrigerants R410A, R454B and R32 as well as the CSVW variable speed compact screw compressor series with permanent-magnet motor. Furthermore, users can now carry out the motor selection for BIT ...

13.06.2018

Belgium?s Brouwerij Martens produces bottles for the soccer World Cup with Direct Print Powered by KHS?

Design individual bottles in batches of one or implement special marketing campaigns within a very short time indeed: Direct Print Powered by KHS? offers beverage producers great flexibility of design, thus giving them the competitive edge. The Martens brewery in Belgium is now making good use of this innovative technology and together with a French supermarket chain is placing specially designed bottles on the shelves for the soccer World Cup. To mark the big kick-off in Moscow Belgium?s Brouwerij Martens is offering its premium beer in 32 country-specific bottle designs on the French market. ...

13.06.2018

Growth expectations to 2020 in Robotics and Automation twice as high as in machinery industry

Production in the sector Robotics and Automation grew by 30% more strongly than that of machinery industry from 2014 to 2017. This positive development naturally influences the growth expectations of machine-builders in this sector. Manufacturers of robotics and automation expect their machine production to grow by 11% per year to 2020. This expectation is twice as high as in machinery industry. Growth in machinery industry is expected to reach 5.5% per year to 2020. This is the result of a market survey conducted by Quest TechnoMarketing in the German mechanical engineering sector. The new in ...

13.06.2018

GWJ is Celebrating 15 Years of Providing Web-based Calculation Software

GWJ Technology GmbH from Braunschweig, Germany, is marking the 15th anniversary of its web-based calculation software eAssistant - the engineering assistant. The eAssistant software allows calculation, design and optimization of machine elements, including shafts, bearings, gears, different shaft-hub connections and bolted joints etc. After several years of development, eAssistant was released in 2003 during Hannover Fair. Dial-up internet was literally the only kind of internet modem back then. The actual release was in May 2003 and included three calculation modules for shafts, rolling beari ...

13.06.2018

Sphero? the innovative machine solution by Thielenhaus Microfinish

The compact, high-precision tool machine Sphero, designed for machining workpieces with spherical forms, has been further developed by Thielenhaus Microfinish into a combination solution capable of handling the entire superfinishing process in just one clamping operation. The world leader has designed an innovative trial machine that can machine spherical workpieces with the highest demands, in terms of fine dimensional accuracy and surface quality, into finished components. The workpiece unit is mounted vertically and easily accessible for fast changeover. Thanks to the integrated tool change ...

12.06.2018

ANGA COM 2018: Iskratel warns operators - "Beware of the low-capex trap"

Cologne, Germany, 12 June 2018 - As operators look to cut their costs, Iskratel''s Strategy and Business Development Director has today cautioned them against simply looking at the price tag of equipment, warning that cheaper items could end up costing between 300% and 800% more than the initial capex saving. Speaking on the opening day of ANGA COM, Janez Ori highlighted how operators could find themselves locked-in and left behind with inferior, non-upgradable technology if they buy cheap, thus missing out on introducing new revenue-generating services. Instead, he recommended inve ...

12.06.2018

Servo couplings for bridging larger distances without an intermediate bearing support

As well as servo bellow couplings as standard and miniature couplings and couplings for fitting in tight spaces or with high torques, JAKOB also manufactures servo couplings for long wheelbases of up to 6 m. These distance couplings, also referred to as prop shafts or intermediate axes, are used to bridge large shaft distances without intermediate bearings. Highly-dynamic distance couplings are needed everywhere in machine and plant construction. They are used primarily in connection with jack screw gears, linear guides, palletting and packaging systems. The main design feature of the distance ...

12.06.2018

OutSystems Sponsors Highly Rated Digital Transformation Conference Series

London, UK - 11th June, 2018 - OutSystems, provider of the number one low-code development platform, today announced that the company is a Global Corporate and Platinum Sponsor for the upcoming Forrester Digital Transformation 2018 conference series. The series includes an event in London on 14th and 15th June. The event will include dozens of sessions featuring industry experts and Forrester analysts discussing the finer points of digital transformation. It will also serve as valuable industry forum with hundreds of technology management and marketing leaders, innovators, and practitioners g ...

11.06.2018

1 Liter of Gap Filler in Only 13 Seconds

Thermal influences can significantly compromise the service life, capacity and especially the operational safety of HV batteries. In order to prevent damage due to excessive temperatures, large quantities of heat-conducting potting media are used here. Scheugenpflug has developed a new system solution for fast and reliable application of these materials. Electric mobility is gaining momentum: Vehicles with alternative drive systems are regarded as a central component in the fight against noise pollution and steadily rising emissions. The heart of these vehicles is the built-in high-voltage bat ...

08.06.2018

WIPOTEC Group at ACHEMA in Frankfurt

At its ACHEMA booth in Frankfurt (hall 3 booth D95) from 11 to 15 June, the WIPOTEC Group will present an extensive portfolio of integrated serialisation solutions for Track & Trace projects which will meet global serialisation regulations in the shortest possible time. TQS Fast Track (Traceable Quality System) solutions provide CMOs and pharmaceutical companies with an extremely fast way to achieve FMD compliance. WIPOTEC-OCS opens up another product focus with its E-M-A checkweigher series which is perfectly matched to the requirements of the pharmaceutical industry thanks to a high degr ...

08.06.2018

Improved performance for comfort beds: DewertOkin''s new OKIMAT 4 IPS double drive

DewertOkin GmbH is expanding its line of bedding products with its new OKIMAT 4 IPS double drive. Its high pushing force makes it excellent for applications with heavy loads; this enables bed manufacturers to reliably implement customized movement profiles. With high-speed adjustment, excellent stability and wireless connectivity, the drive is well suited for use in comfort beds (such as box spring beds which are currently quite popular). "Bed manufacturers are being confronted with growing demand for their comfort-oriented products, which are expected to have more functionality. Our OKIM ...

05.06.2018

Use of torsionally rigid metal bellows couplings in Special high-speed test benchs

Special high-speed test benches are used to test bearings. In these tests, the effects of different lubricants on the sliding properties of the bearings in the endurance test are checked. The structural design of such a test rig must meet different requirements. The drive is subject to special conditions. In addition to a lateral force-free storage, the coupling is a not to be underestimated component. Essential features in this case are the absolute torsional rigidity, the good damping properties and, of course, the precise and almost powerless compensation of all offset errors between the sh ...

05.06.2018

New precision drilling module with digital settings

Swiss Tools Systems AG has developed a precision drilling module that allows making adjustments directly on the machine. The adjusting mechanism is digital and easy to use. It facilitates high-precision adjustments in the s a significant productivity boost. "Our digital precision drilling module saves users the legwork between the machine and the tool room," says Peter Heinemann, business manager of Tools at Swiss Tool Systems AG. The Swiss have developed a precision drilling module that can be set digitally, directly on the machine. It allows simple, fast and accurate length and dia ...

05.06.2018

The Robotics and Automation industry is growing extremely dynamically - new Quest industry report

The Robotics and Automation sector of the German mechanical engineering has proven itself to be a dynamic driver for higher efficiency, particularly in the last two years. This applies both with regard to its economic position in machinery industry and with regard to the application of their products by machine-builders. Quest TechnoMarketing investigated both aspects. The economic situation of the industry is examined in a current industry report, published in the Quest Trend Magazine on http://www.quest-trendmagazine.com/en/machinery-industry/robotics-and-automation/robotics-and-automation-p ...

05.06.2018

All-Rounder SKB

The modern, innovative mechanical engineering aims at decreasing external dimensions and higher performance potential of the building components. More and more compact drive elements with maximum power density are required. But also the safety aspect, such as Collision protection in the event of a machine crash continues to gain importance due to increasing automation and dynamization. With the type SKB, JAKOB Antriebstechnik has a safety clutch generation for overload limitation or collision protection for indirect drives in the range, which meets these requirements. The high user benefit of ...

30.05.2018


Page 1 from 87:  1 2  3  4  5  .. » 87





All members: 8 420
Register today: 0
Register yesterday: 1
Members online: 0
Guests online: 83


Don't have an account yet? You can create one. As registered user you have some advantages like theme manager, comments configuration and post comments with your name.