P-CUBE Photodiode Modules for Application on an Optical Bench
The Die Has Been Cast
(PresseBox) - Precise measurement technology in a compact measurement setup: this describes the new P-CUBEs made by LASER COMPONENTS.
Low-noise, sensitive PIN photodiodes are housed in cubes. The CUBEs have an edge length of only 40 mm. To integrate them into optomechanical setups, the CUBEs can be attached to a rod system.
The following versions are available: GaP photodiode (190-570 nm), Si photodiode (200-1050 nm), InGaAs PIN photodiode (800-2200 nm). The photocurrent is obtained using a BNC connector. The P-CUBE is also available with an optical FC connector.
iAMP-700. The programmable iAMP-700 current amplifier is directly connected to the P-CUBE with a BNC connector. It is possible to achieve amplifications of 102-1011 V/A with the iAMP-700.
P-CUBE & iAMP - A Strong Combination. By combining the P-CUBE and iAMP-700, the smallest amount of light can be detected reliably. The iAMP's EMC housing allows application in close proximity to the source. The P-CUBEs require a bias voltage between -10 V and +10 V. This can be obtained directly from the iAMP.
Trade Shows
electronica 2012, Nov, 13-17, 2012, Munich International Trade Fairs, Germany, Booth A2.306
BiOS 2013, Feb, 2-3, 2013, Moscone Center, San Francisco, USA, Booth 8517
Photonics West 2013, Feb, 5-7, 2013, Moscone Center, San Francisco, USA, Booth 517
LASER. World of Photonics, 13.-16.05.2013, Neue Messe München, Germany
LASER COMPONENTS is specialized in the development, manufacture, and sale of components and services for the laser and opto-electronics industries. With sales offices in four different countries, the company has served its customers since 1982. In-house production at six locations in Germany, Canada, and the USA began in 1986 and is meanwhile responsible for about half of its turnover. Currently, the family-run business employs more than 140 people worldwide.
Themen in dieser Pressemitteilung:
Unternehmensinformation / Kurzprofil:
LASER COMPONENTS is specialized in the development, manufacture, and sale of components and services for the laser and opto-electronics industries. With sales offices in four different countries, the company has served its customers since 1982. In-house production at six locations in Germany, Canada, and the USA began in 1986 and is meanwhile responsible for about half of its turnover. Currently, the family-run business employs more than 140 people worldwide.
Datum: 07.11.2012 - 03:38 Uhr
Sprache: Deutsch
News-ID 757376
Anzahl Zeichen: 0
Kontakt-Informationen:
Ansprechpartner:
Stadt:
Olching
Telefon:
Kategorie:
Optische Technologien
Anmerkungen:
Diese Pressemitteilung wurde bisher 39 mal aufgerufen.
Die Pressemitteilung mit dem Titel:
"P-CUBE Photodiode Modules for Application on an Optical Bench
"
steht unter der journalistisch-redaktionellen Verantwortung von
LASER COMPONENTS GmbH (Nachricht senden)
Beachten Sie bitte die weiteren Informationen zum Haftungsauschluß (gemäß TMG - TeleMedianGesetz) und dem Datenschutz (gemäß der DSGVO).
